Detailed instructions for use are in the User's Guide.
Operating Instructions
For Digital Camera PC Connection
QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license therefrom.
VQT1D44
PC Connection for Sharing and Printing
Using "LUMIX Simple Viewer" on the supplied CD-ROM, you can easily transfer pictures to the PC, print them, attach them to e-mails, and so on. · In these operating instructions, "LUMIX Simple Viewer" is referred to as "Simple Viewer".
1.
Installing Simple Viewer software.
3.
Print pictures and attach them to e-mails.
2.
Transfer recorded pictures to the PC.
2
VQT1D44
Contents
PC Connection for Sharing and Printing ............................................................................ 2
Introduction
Read Before Use ............................................................................................................... 4 Key terms .................................................................................................................... 4 Is Simple Viewer compatible with any PC? ................................................................. 5
Setting up
Installing the Software 1 ................................................................................................... 6 Installing the USB driver (Windows 98/98SE only) ...................................................... 6 Installing the Software 2 ................................................................................................... 7 Installing Simple Viewer .............................................................................................. 7 Connecting the Digital Camera to PC ................................................................................ 8
Using Simple Viewer
Transferring pictures to the PC (Acquire to PC) ................................................................ 9 Viewing pictures (View) ................................................................................................... 10 Printing pictures (Print) .................................................................................................... 13 Sending pictures by e-mail (Send by e-mail) ................................................................... 16 Advanced ......................................................................................................................... 18 Enabling pictures stored on the PC to be used with Simple Viewer (Add pictures) .......................................................................................................... 19 Viewing pictures stored on the PC with the digital camera (Export to the card) ................................................................................................. 20 After Using Simple Viewer ............................................................................................... 22
Others
To Transfer Picture without Using Simple Viewer ........................................................... 23 How to Use with Macintosh ............................................................................................. 24 How to Remove the USB Driver and Simple Viewer (Uninstall) ...................................... 25 When Pictures cannot be Transferred ............................................................................. 26 Troubleshooting ............................................................................................................... 27 Operating Environment .................................................................................................... 30 Spanish Install Guide/GuÃa de instalación de españo ..................................................... 32 Instalación del controlador USB (sólo Windows 98/98SE) ........................................ 32 Instalación de Simple Viewer .................................................................................... 33 Cómo quitar el controlador USB y Simple Viewer (Desinstalación) ................................. 34
3
VQT1D44
Introduction
Introduction
Read Before Use
· Please note that some of the explanations and screens covered in these operating instructions may differ from actual ones depending on the operating environment of the PC. · The explanations of these operating instructions are subject to change without prior notification. · No part of these operating instructions may be reproduced without permission. · Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. · Explanations about Windows in these operating instructions are based on Windows XP screens. · In these operating instructions, a Card refers to an SD memory card, including the built-in memory.
Key terms
· Key terms you should know at the minimum when using the PC are listed below. Refer to the operating instructions for the PC too. Term Application software Explanation Refers to software programs to be used for various purposes such as word processing, spreadsheet operation, picture editing, and e-mail sending/receiving. "Install" refers to incorporating software into the PC and making it ready for use, and deleting the installed software is referred to as "Uninstall". A "Drive" refers to a PC peripheral device (CD-ROM drive, digital camera, etc.) that files are written in and read from, and the software to operate such a drive is referred to as a "Driver". Refers to a document, picture, or other data. Refers to a place where a grouping of files are stored. "Click" refers to pressing and releasing the mouse button. Clicking the mouse button twice in rapid succession is referred to as "Double-click". · In these operating instructions, description is made on the basis of left-click. · If double-clicking cannot be performed well, change the interval of the clickings.
Install/Uninstall
Drive/Driver
File Folder Click/Double-click
4
VQT1D44
Introduction
Is Simple Viewer compatible with any PC?
Using a USB connection, you can transfer the pictures held in the digital camera to the PC. With Simple Viewer, however, you can save them to the PC more easily.
Windows
· To identify the OS (PC type), select [start] >> ([Setup] >>) [Control Panel] (>> [Performance and Maintenance]), and then (double-) click [System]. You can see the OS. 95 and earlier versions 98 98SE Me 2000 XP
Possible to use Simple No Yes Viewer? Can I acquire the pictures held in the Yes digital camera to the PC using the USB No¢1 connection cable? Necessary to install the Yes No USB driver? Which page should I P27 P6, 8 ¢2 P6 P7 refer to? ¢1 You can acquire them if the PC has a PC card slot. ¢2 To learn how to acquire pictures, refer to P23. · Please confirm compatibility with Windows Vista on the following website. http://panasonic.co.jp/pavc/global/cs (This Site is English only.)
Macintosh
OS 8.x and earlier versions Possible to use Simple Viewer? Can I acquire the pictures held in the digital camera to the PC using the USB connection cable? Necessary to install the USB driver? Which page should I refer to? OS 9 No OS X
No¢3
Yes
Yes¢4
No P27 P24
¢3 You can acquire them if the PC has a PC card slot. ¢4 If using Mac OS X 10.2.x or earlier versions, slide the Write-Protect switch on the SDHC Memory Card to the [LOCK] side when acquiring images from it.
5
VQT1D44
Setting up
Setting up
Installing the Software 1
Installing the USB driver (Windows 98/98SE only)
· If Windows 98/98SE is used, install the USB driver (software for operating the digital camera through a PC) before connecting the digital camera to the PC. · This installation is not required on the 2nd and later connections. · If any OS other than Windows 98/98SE is used, this installation is not required. · Before inserting the CD-ROM, close all running applications.
1. 2.
Insert the CD-ROM. Click [USB Driver].
4.
The setup menu will start.
If the [Restarting Windows] dialog box appears, click [OK].
After the PC is restarted, installation of the USB driver will be completed.
3.
Click [Next].
If the setup menu does not start automatically: · Double-click [My Computer] on the desktop, double-click or open [VFFXXXX] (part No. XXXX varies by model), and double-click [InstMenu.exe].
· Installation of the USB driver starts.
6
VQT1D44
Setting up
Installing the Software 2
Installing Simple Viewer
· This installation is not required on the 2nd and later connections. · Before inserting the CD-ROM, close all running applications.
1. 2.
Insert the CD-ROM. Click [LUMIX Simple Viewer].
The setup menu will start.
· Before first use following the completion of installation, be sure to select [Readme] from [start] >> [All programs] >> [Panasonic] >> [LUMIX Simple Viewer] to read additional information. · Simple Viewer is installed in the following folder. (It cannot be changed.) C:\Program Files\Panasonic\ LUMIXSimpleViewer If the setup menu does not start automatically: · Double-click [My Computer] on the desktop, double-click or open [VFFXXXX] (part No. XXXX varies by model), and double-click [InstMenu.exe]. If Simple Viewer cannot be installed: · If Windows 2000/XP is used, you cannot install when you have logged on to the PC as a Limited Account user. Log on as an Administrator Account user and install again. For details, refer to the operating instructions for the PC.
3.
Proceed with installation according to messages appearing on the screen.
· Only when Windows 98SE is used, MDAC2.8 (Microsoft Data Access Components 2.8) may also be installed. Install it according to messages shown on the screen.
7
VQT1D44
Setting up
Connecting the Digital Camera to PC
· When Windows 98/98SE is used, install the USB driver (P6) before connection. · If the PC has a built-in SD memory card slot, insert a Card into the slot and you can transfer pictures to the PC by use of Simple Viewer. · When the connection is established correctly, Simple Viewer automatically opens the screen to begin file transfer. (P9) If Windows 98 is used, refer to P23.
A: USB connection cable B: AC Adaptor · The illustrations show examples of those of the DMC-FX12/DMC-FX10. · AC adaptors may be optionally supplied depending on the model. Preparations on the digital camera side When you connect the digital camera to the PC, use batteries with sufficient battery power or the AC adaptor. If the remaining battery power is exhausted during communication, the recorded data may be damaged. · If you use the AC adapter, connect it. · Turn on the digital camera.
· When the following screen appears, click [Cancel] to close it.
· If Simple Viewer does not start automatically, refer to P27. · Do not operate the digital camera or disconnect the USB connection cable while transferring data from the digital camera. The software may not function correctly and damage the data being transferred. · The shape of the terminal varies depending on the digital camera used. For details, refer to the operating instructions for the digital camera.
1.
Connect the digital camera to the PC via the supplied USB connection cable.
· Set the digital camera for connecting to a PC. (For details, refer to the operating instructions for the digital camera.)
8
VQT1D44
Using Simple Viewer
Using Simple Viewer
Transferring pictures to the PC ( Acquire to PC)
· To start Simple Viewer after the initial setup and installation, double-click the shortcut icon of the LUMIX Simple Viewer on your desktop.
1.
When the message for inquiring whether to start transfer is displayed, click [Yes].
opened to display the acquired pictures in thumbnail view. · When there are many pictures to acquire or the file size of pictures is large, it may take time to transfer them. Transfer destination folder: · The pictures transferred to the PC are saved in the following folder. Windows 2000/XP C:\Documents and Settings\ All Users\My Documents\My Pictures\ PHOTOfunSTUDIO Windows 98SE/Me C:\My Documents\My Pictures\ PHOTOfunSTUDIO · When you wish to change the current destination folder, refer to P21.
2.
Click [OK].
When you click [Cancel] during transfer: · Transfer will be aborted halfway, and the pictures already acquired will be displayed in thumbnail view.
Pictures will be transferred from the card to the PC and the [ View] screen will be
9
VQT1D44
Using Simple Viewer
Viewing pictures (
View)
· To start Simple Viewer after the initial setup and installation, double-click the shortcut icon of the LUMIX Simple Viewer on your desktop.
1.
Select [
View].
3.
Select a folder, and in thumbnail view, select any picture.
· When the above main menu is not displayed, click [ Menu] and then click [ View].
2.
Select the location where pictures are saved.
· When you select [ On the memory card] in step 2, no folders are displayed. To view motion pictures: · QuickTime must be installed on the PC used. · Depending on the efficiency of your PC, the picture or audio may be interrupted when playing back moving ...
