1, , 1 TAPE CARD 2, , 2 MPEG4 VOICE PICTURE ª Recording a Moving Picture (MPEG4) You can record moving pictures for e-mailing on a card. The recorded data can be also played back on Windows Media Player. Recording from the Movie Camera Lens (Camera Mode) 1 Slide the [TAPE/CARD] Selector to [CARD]. 2 Slide the [PICTURE/MPEG4/VOICE] Selector to [MPEG4]. 3 Set [MPEG4 MODE] on the [CARD SETUP] Sub-Menu to [FINE] or [NORMAL]. 4 Press the Recording Start/Stop Button. It takes 2 to 3 seconds to start recording. During recording the [ MPEG4 ] Indication is lit in red. When Remaining Time Indication becomes [R:0h00m], [R:0h00m] indication flashes in red. Recording may not be started. When [MPEG4 MODE] on the [CARD SETUP] Sub-Menu is set to [FINE], the image of the moving picture (MPEG4) looks smooth. The shutter speed is adjusted within the range of 1/50 to 1/500 while recording moving pictures (MPEG4). The picture size of the moving picture (MPEG4) is set to be [176k144]. When attaching to email, we recommend the picture size to be less than 1MB (about 1 minute length). The following functions are disabled: Digital zooming (l 21) Cinema function (l 22) Digital functions (l 27) Title functions (l 45) Fade In/Out Function (l 22) For other notes concerning this item, see page 54. 4, !, 3 R:0h20m MPEG4 Recording from a Cassette (VCR Mode) 1 Slide the [TAPE/CARD] Selector to [CARD]. 2 Slide the [PICTURE/MPEG4/VOICE] Selector to [MPEG4]. 3 Start playback and press the Recording Start/Stop Button at the desired scene. Recording from an other equipment 1 Slide the [TAPE/CARD] Selector to [CARD]. 2 Slide the [PICTURE/MPEG4/VOICE] Selector to [MPEG4]. 3 Input the image from other equipment then press the Recording Start/Stop Button at the desired scene. 1 TAPE CARD MPEG4 VOICE PICTURE 2 ª Recording Voice (Voice Recording You can record voice data on a card. Function) 1 Slide the [TAPE/CARD] Selector to [CARD]. 2 Slide the [PICTURE/MPEG4/VOICE] Selector to [VOICE]. 3 Press the Recording Start/Stop Button. Voice from built-in microphone is recorded. It takes 2 to 3 seconds to start recording. The recorded file is automatically locked (to prevent accidental erasure). Voice from external microphone connected to the microphone socket can also be recorded. During recording, the [ VOICE ] Indication appears and is lit in red. If a card is not inserted, the [ VOICE ] Indication flashes in red. When Remaining Time Indication becomes [R:0h00m], [R:0h00m] indication flashes in red. Recording may not be started. For other notes concerning this item, see page 54. 3 R:0h20m VOICE 41 Playing Back a Card 2, 1 1 CAMERA VCR CARD P.B MPEG4 VOICE PICTURE It plays back files recorded on a Card. When you set the Movie Camera to Card Playback Mode, the Card Contents 1 are displayed to inform you which kind(s) of data (still picture, moving picture and/or voice data) are recorded on the Card. 1 Set the Movie Camera to Card Playback Mode. MODE ON OFF The [CARD P.B] Lamp lights up. The file that was recorded last on the Card is displayed. 2 Slide the [PICTURE/MPEG4/VOICE] Selector to desired type of data. MENU 1 3 Start Playback. 3 1: 5: 6: : ;: SHUTTER/IRIS/ VOL/JOG 3, 4 PUSH 1, 2 Playing back the File Playing back the next File Playing back the previous File Stop playing back Pause playing back (When playing back MPEG4 Data or Voice Data, this button doesn't pause playing back within 2 seconds of finishing playing back.) When [PICTURE] is selected at step2 When [SLIDE SHOW] is set to [ALL], pressing [1] makes all the pictures play back continuously. When [SLIDE SHOW] is set to [PRESET], pressing [1] makes Slide Show start. MULTI/P-IN-P 2, 4 When [MPEG4] is selected at step2 When the object is moving fast or zoom operation is performed, picture may appear to be still or causes mosaic-pattern noise, but this is not a malfunction. 1 CARD CONTENTS PICTURE MPEG4 VOICE When [VOICE] is selected at step2 If the Operation Lever is pushed towards [6] or [5] for 1 or more seconds, it becomes 10k playback and keep pressing for 7 or more seconds, it becomes 60k playback. Releasing the Operation Lever brings back to normal playback. 2 100-0012 3 4 2 MPEG4 When [MPEG4] or [VOICE] is selected at step 2, during playback, keep pressing [PUSH] Dial until the volume Indication appears and turn it to adjust the volume. (l 30) 2 Folder-File Number (When [PICTURE] or [MPEG4] is selected at step 2.) 3 Picture Size (When [PICTURE] is selected at step 2.) 4 File Number 5 Playback time (When [MPEG4] or [VOICE] is selected at step 2.) 5 4 VOICE 1 Slide the [PICTURE/MPEG4/VOICE] Selector to desired type of data. To Select a Desired File and Play It Back 2 Press the [MULTI] Button. 5 4 6 640 3 Turn the [PUSH] Dial and select a desired file. The files recorded on the Card are displayed in Multi-Picture Mode. 6 The selected file is marked with a frame. When 7 or more files have been recorded, turn the [PUSH] Dial to display the next file. The Operation Lever (towards [6] or [5]) can be used instead of the [PUSH] Dial. PICTURE 4 Press either the [PUSH] Dial or the [MULTI] Button. 640 640 The selected file is shown on the entire screen. 640 640 640 No.25 100-0012 3 7 4 2 Using File Search Mode 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [FILE SEARCH] >> [YES]. The File search screen 7 appears. 2 Turn the [PUSH] Dial and select the desired file number, and press the [PUSH] Dial. For other notes concerning this item, see page 54. 42 Recording Pictures on a Card to a Tape 1 TAPE CARD MPEG4 VOICE PICTURE 2 Card Images can be recorded on the Tape one at a time or all automatically. After setting to Card Playback Mode, please carry out the following procedures. 4 PHOTO SHOT To Copy 1 Picture 1 Slide the [TAPE/CARD] Selector to [TAPE]. 2 Slide the [PICTURE/MPEG4/VOICE] Selector to [PICTURE]. 3 Display a desired picture. 4 Press the [PHOTO SHOT] Button. It takes approximately 7 seconds to record a picture to the Tape. During the copying, the Indication 1 appears. When recording to tape, select the tape position before recording. The picture will be recorded to the tape position when the [PHOTO SHOT] Button is pressed at Step 4. When picture with a size other than [640k480] are copied on the cassette, their picture quality will be slightly deteriorated. Picture size recorded on tape is [640k480]. (Cannot save as mega-pixel still picture) 1 RC E NOW RECORDING MPEG4 VOICE PICTURE 1 Slide the [PICTURE/MPEG4/VOICE] Selector to [PICTURE]. 2 Display the first picture. 3 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [RECORD TO TAPE] >> [YES]. It takes 7­11 seconds for each picture to be copy on the Tape. To stop the copying midway, push the Operation Lever towards []. During the copying, the Indication 1 appears. Moving Picture (MPEG4) and Voice data cannot be recorded from a card to tape. For other notes concerning this item, see page 54. If a picture other than the first one is displayed, only the subsequent pictures will be copied. To Copy All the Pictures MENU ! SHUTTER/IRIS/ VOL/JOG PUSH 1 RC E NOW RECORDING 43 Slide Show MENU The recorded still pictures in the Card can be played back like a Slide Show. 1 SHUTTER/IRIS/ VOL/JOG PUSH To Play Back All the Pictures Continuously 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES] >> [SLIDE SHOW] >> [ALL]. But, this procedure is unnecessary when editing of a Slide Show (undermentioned reference) is not being done. 2 Push the operation Lever towards [1]. The [SLIDE!] Indication is displayed. 1 2 All of the pictures are played back for about 5 seconds each. To Pause the Slide Show 1 SLIDE 2 SLIDE Push the Operation Lever towards [;]. The [SLIDE;] Indication is displayed. 2 Editing a Slide Show 1, 5 ~~~~~~~~~~~~~~~~~~~~~~~~ You can set up a Slide Show or change the content. MENU 1 To Select Pictures to Play Back in Your Slide Show 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES] >> [EDIT] >> [YES]. 2 Turn the [PUSH] Dial to select a picture then press it. 3 Turn the [PUSH] Dial to select playback order then press it. This step is skipped when there is no picture that has set for the Slide Show. Playback Order Indication 1 1, 2, 3, 4 1, 2 SHUTTER/IRIS/ VOL/JOG 4 Turn the [PUSH] Dial to adjust the playback time then press it. Playback Time (Second) Indication 2 The [¥] Indication 3 is displayed to the picture set. To select the next picture, repeat the Steps 2 to 4 above. PUSH EDIT 5 Press the [MENU] Button to end the setup. To Play Back the Slide Show That Has Been Set You must set [SLIDE SHOW] >> [EDIT] first. 3 PRESS MENU TO 1 No.5 9SEC RETURN 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES] >> [SLIDE SHOW] >> [PRESET]. 2 2 Push the Operation Lever towards [1]. The [M.SLIDE!] Indication is displayed. 4 To Verify the Selected Picture Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES] >> [VERIFY] >> [YES]. Only the selected pictures are displayed in Multi-Picture Mode in the Playback order. 4 M.SLIDE To Delete the Selected Picture 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES] >> [DELETE] >> [YES]. 2 Select the picture you wish to delete and press the [PUSH] Dial. The selected picture is marked with a frame. To Reset the Slide Show Setup Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES] >> [RESET] >> [YES] >> [YES]. Slide Show settings are reset. For other notes concerning this item, see page 54. 44 Creating a Title CREATE TITLE You can create a title and record on a Card. 1 Camera Mode: LUMINANCE RETURN PRESS MPEG4 VOICE PICTURE MENU TO EXIT 1 Slide the [PICTURE/MPEG4/VOICE] Selector to [PICTURE] and set the Lens to the image you want to use for creating a title. VCR Mode: Search for the image you want to use for creating a title and set the Movie Camera to the Still Playback Mode. 2 Set [CARD SETUP] >> [CREATE TITLE] >> [YES]. 3 Press the [PHOTO SHOT] Button. The title is stored. To perform Photoshot again, select [RETURN]. 3 PHOTO SHOT 4 Select [LUMINANCE] and press the [PUSH] Dial, turn it to adjust the title contrast and press it. 5 Select [COLOUR] and press the [PUSH] Dial, turn it to adjust the colour and press it. The dark portion of the image is missing 1, and the colours of the bright portion change in order the original colour, black, blue, green, cyan, red, magenta, yellow, and white, after which the bright portion of the image is missing 2 and the colours of the dark portion change in the above order. MENU 2 6 Select [RECORD] and press the [PUSH] Dial. The title is recorded on the card. For other notes concerning this item, see page 54. SHUTTER/IRIS/ VOL/JOG PUSH 2, 4, 5, 6 1 2 Adding a Title r ~~~~~~~~~~~~~~~~~~~~~~~~~ The title is displayed. A title can be added to the picture. It is displayed in Camera Mode, VCR Mode and Card Playback Mode. 1 Press the [TITLE] Button. 2 Press [MULTI] Button. A list of titles is displayed. 1 3 Turn the [PUSH] Dial to select a desired title. The selected title is marked with a frame. 1 TITLE 4 Press the [PUSH] Dial or [MULTI] Button. The selected title is displayed. Recording and Photoshot Recording can be done with pictures that have titles. 2 File name 2, 4 MULTI/P-IN-P To Clear the Title Display Press the [TITLE] Button. 3, 4 SHUTTER/IRIS/ VOL/JOG PUSH The [ACCESS] Indication appears until the titles are displayed completely. Perform the Recording after the [ACCESS] Indication disappears. The supplied Card contains titles. If an original title has not been created preset title will be displayed. For other notes concerning this item, see page 55. 1 TITLE USR00002.TTL 2 45 Protecting the Files on a Card (Lock Setting) Precious files recorded on a Card can be locked (to prevent accidental erasure). (Even if files are locked, the files will be deleted when the Card is formatted.) 1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [FILE LOCK] >> [YES]. MENU 1 SHUTTER/IRIS/ VOL/JOG The [FILE LOCK] Menu is displayed. 2 Turn the [PUSH] Dial to select [PICTURE] or [TITLE] and press it. PUSH 1, 2, 3 3 Turn the [PUSH] Dial to select the file to be locked, and press it. The selected file is locked and the [ ] Indication 1 is attached to the selected files. Files recorded by Voice Recording Function is automatically locked (to prevent accidental erasure). Press the [PUSH] Dial again to cancel. The SD Memory Card has a write protection switch. (l 55) FILE LOCK 640 640 640 640 640 640 1 PRESS MENU TO EXIT For other notes concerning this item, see page 55. Deleting the Files Recorded on a Card ~~~~~~~~~~~~~~~~~~~~~~~~ Using the Movie Camera, you can delete the files recorded on a Card. After the file is deleted, it cannot be restored. At first, slide the [PICTURE/MPEG4/VOICE] Selector to select the type of data to be erased. MENU 1 1 To Select and Delete Files 1 Set [CARD FUNCTIONS] >> [ERASE CAR ...