Operating Instructions Digital Transmitter & Receiver Model No. SH-FX60 Designed for Panasonic DVD Home Theater Sound System compatible with the SH-FX60. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. GN p Matsushita Electric Industrial Co., Ltd. Web Site: http://panasonic.net RQT8621-B F0406YM0 Printed in Malaysia WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. System Digital transceiver Wireless system SH-FX60 SH-FX80T SE-FX60 Accessory Please check and identify the supplied accessory. 1 CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. DO NOT OBSTRUCT THE UNIT'S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT. DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER. THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES. This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone. The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable. AC mains lead For use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with this unit. Setup Preparation Turn off all equipment before connection and read the appropriate operating instructions. Connect the AC mains lead after all other connections are complete. Wireless setup diagram e.g. Wireless system Home theater unit (with the digital transceiver) Do not attempt to connect any extra surround speakers to the home theater unit. Surround speaker cables Place the wireless system within approximately 10 m from the home theater unit. [Note[ Do not use the wireless system or the digital transceiver in a metal cabinet or bookshelf. Avoiding interference To avoid possible interference, do not place the SH-FX60 near any of the following devices. The SH-FX60 uses the same radio frequencies as other devices that may be present in your home. e.g. 2.4GHz-band microwave oven personal computer with 2.4GHz-band wireless LAN 2.4GHz-band cordless phone The SH-FX60 will automatically seek a clear channel if any of these other devices interfere with its communication. When this happens, the wireless link indicator (e.g. " [W] " or LED) flashes on your home theater unit, and there is a brief interruption in audio coming from the surround speakers. This is the normal operation of the product working to assure the best possible performance of your Home Theater System. If the interference persists, try moving the other devices to another location outside the range of the SH-FX60. Connecting the digital transceiver Insert the digital transceiver into the slot of your home theater unit. e.g. Connecting the surround speaker cables to the wireless system 1 Do not insert or remove while the home theater unit is on. If the surround speaker cables have already been connected Disconnect the surround speaker cables from your home theater unit. Connect the surround speaker cables to the wireless system. Flip the tab open. 2 AC IN~ L R Rear of the home theater unit Insert the wire fully. i: White j: Blue Digital transceiver Insert fully until you hear a click. AC mains lead Surround speaker cable (R) Surround speaker cable (L) Flip the tab closed. Click! To household mains socket (AC 230 to 240 V, 50 Hz) Making the wireless link Refer also to the operating instructions for your home theater unit. 1 2 Turn on your home theater unit. Ensure the wireless system is connected to the mains socket. 3 Start play on the home theater unit. Check the wireless link indicator on the home theater unit. " [W] " or LED should light up on the home theater unit. If " [W] "or LED is flashing, refer to Troubleshooting guide. e.g. Conserving power The wireless system consumes a small amount of power when it is in standby mode (approx. 4 W). To save power when the unit is not to be used for a long time, unplug it from the household mains socket. [Note[ The unit is in the standby condition when the AC power supply cord is connected. The primary circuit is always "live" as long as the power cord is connected to an electrical outlet. W AC IN WIRELESS LINK AC supply indicator [AC IN] This indicator lights when the unit is connected to the AC mains supply. Lighting Ring Lights when the wireless link is active. Safety precautions Placement Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit's service life. Do not place heavy items on the unit. Foreign matter Do not let metal objects fall inside the unit. This can cause electric shock or malfunction. Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer. Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit. Voltage Do not use high voltage power sources. This can overload the unit and cause a fire. Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other places where DC is used. Service Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons. Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time. AC mains lead protection Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead. Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock. Do not handle the plug with wet hands. This can cause electric shock. - If you see this symbolInformation on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the table do not solve the problem, consult your dealer for instructions. Specifications RF SECTION Wireless module Frequency range No. of channels RF output power 2.403 to 2.425 GHz 23 14 dBm (Max) On your home theater unit The wireless There is no link between the home theater unit and the link indicator wireless system. Check that the wireless system is (e.g. " [W] " connected to the mains socket. or LED) is flashing. The wireless Check that the home theater unit is turned on, and the link indicator wireless system is connected to the mains socket. (e.g. " [W] " Ensure that the digital transceiver is fully inserted into the or LED) does slot of the home theater unit. not light. AMPLIFIER SECTION Output power RMS output power: Dolby Digital Mode Surround Ch 110 W per channel (3 ), 1 kHz, 10 % THD Total RMS Dolby Digital mode power 180 W DIN output power stereo mode Surround Ch (both ch driven) 50 W per channel (3 ), 1 kHz, 1 % THD Total DIN stereo mode power 100 W NAME PLATE IMPEDANCE INDICATION: 3 to 6 GENERAL AC 230 to 240 V, 50 Hz SH-FX80T 0.85 W SE-FX60 30 W Dimensions (WtHtD) SH-FX80T 97 mmk47.5 mmk8.5 mm SE-FX60 89 mmk189 mmk180 mm Mass SH-FX80T 0.03 kg SE-FX60 0.7 kg Operating temperature range r5 oC to r35 oC Operating humidity range 5 % to 90 % RH (no condensation) Power consumption in standby mode 4W Power supply Power consumption Maintenance Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically treated cloth, carefully read the instructions that came with the cloth. [Note] 1. Specifications are subject to change without notice. Mass and dimensions are approximate. 2. Total harmonic distortion is measured by a digital spectrum analyzer. ...