PLASMA DISPLAY Operating Instructions High Definition Plasma Display Model No. TH-65PHD7UY The illustration shown is an image. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. English TQBC0916 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance. WARNING: To prevent damage which may result in fire or shock hazard, do not expose this apparatus to rain or moisture. Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.) WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. 2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding plug. 2 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments / accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected. 3 Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Important Safety Instructions ................................... 3 FCC STATEMENT ....................................................... 5 Safety Precautions ..................................................... 6 Accessories ................................................................ 8 Accessories Supplied ................................................ 8 Remote Control Batteries .......................................... 8 Connections ............................................................... 9 PC Input Terminals connection ............................... 10 SERIAL Terminals connection ................................. 11 AV & COMPONENT connection ............................. 12 RGB signal (R, G, B, HD, VD) ................................ 12 Power ON / OFF ........................................................ 13 Basic Controls .......................................................... 14 On-Screen Menu Displays ....................................... 16 Initial selections ....................................................... 18 Selecting the input signal ........................................ 18 Selecting the On-Screen Menu Language .............. 18 ASPECT Controls ..................................................... 19 Adjusting PICTURE POSITION / SIZE ..................... 20 MULTI PIP .................................................................. 21 PICTURE Adjustments ............................................. 22 ADVANCED SETTINGS ......................................... 23 SOUND Adjustment ................................................. 24 MUTE ...................................................................... 24 Digital Zoom ............................................................. 25 PRESENT TIME SETUP / SET UP TIMER ............... 26 PRESENT TIME SETUP ......................................... 26 SET UP TIMER ....................................................... 27 SCREENSAVER (For preventing after-images) ..... 28 Setup of SCREENSAVER Time .............................. 29 Reduces screen after-image ................................... 29 SIDE BAR ADJUST ................................................ 30 Reduces power consumption ................................. 31 Customizing the Input labels ................................... 31 SET UP for MULTI DISPLAY .................................... 32 How to setup MULTI DISPLAY ................................ 32 How to set the Display location number for each Plasma Display ............................... 33 SET UP for Input Signals ......................................... 34 COMPONENT / RGB IN SELECT .......................... 34 3D Y/C FILTER ....................................................... 34 COLOR SYSTEM / Panasonic AUTO ..................... 35 3:2 PULLDOWN / VIDEO NR ................................ 35 SYNC ...................................................................... 36 H-FREQ. (kHz) / V-FREQ. (Hz) ............................... 36 Shipping condition ................................................... 37 Troubleshooting ....................................................... 38 Maintenance ............................................................. 39 VIDEO/COMPONENT/RGB/PC input signals ......... 40 Specifications ........................................................... 41 4 FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: To assure continued compliance and possible undesirable interference, the provided ferrite cores must be used when connecting this plasma display to video equipment; and maintain at least 40 cm spacing to other peripheral devices. Refer to instructions on page 10 and 11. Any changes or modifications not expressly approved by Matsushita Electric Corporation of America could cause harmful interference and would void the user's authority to operate this device. FCC Declaration of Conformity Model No. TH-65PHD7UY Responsible Party: Contact Source: Matsushita Electric Corporation of America One Panasonic Way, Secaucus, NJ 07094 Panasonic Consumer Electronics Company 1-888-843-9788 email: consumerproducts@panasonic.com CANADIAN NOTICE: This Class B digital apparatus complies with Canadian ICES-003. Note: Do not allow a still picture to be displayed for an extended period, as this can cause permanent after-image to remain on the Plasma Display. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode. Trademark Credits VGA is a trademark of International Business Machines Corporation. Macintosh is a registered trademark of Apple Computer, USA. S-VGA is a registered trademark of the Video Electronics Standard Association. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected. · · · 5 Safety Precautions WARNING Setup Do not place the Plasma Display on sloped or unstable surfaces. · The Plasma Display may fall off or tip over. Do not place any objects on top of the Plasma Display. · If water spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma Display, please consult an Authorized Service Center. Do not cover the ventilation holes. · Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display. If using the pedestal (optional accessory), leave a space of 3 15/16" (10 cm) or more at the top, left and right, 2 3/8" (6 cm) or more at the bottom, and 2 3/4" (7 cm) or more at the rear. If using some other setting-up method, leave a space of 3 15/16" (10 cm) or more at the top, bottom, left and right, and 2 61/64" (7.5 cm) or more at the rear. Avoid installing this product near electronic equipment that easily receives electromagnetic waves. · It may cause interference in image, sound, etc. In particular, keep video equipment away from this product. AC Power Supply Cord The Plasma Display is designed to operate on 120 V AC, 50/60 Hz. Securely insert the power cord plug as far as it will go. · If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket plate is loose, they should not be used. Do not handle the power cord plug with wet hands. · Doing so may cause electric shocks. Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable. · Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center. If the Plasma Display will not be used for a long period of time, unplug the power cord from the wall outlet. If problems occur during use If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma Display, unplug the power cord immediately. · Continuous use of the Display under these conditions might cause fire or permanent damage to the unit. Have the Display evaluated at an Authorized Service Center. Services to the Display by any unauthorized personnel are strongly discouraged due to its high voltage dangerous nature. If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet becomes damaged, disconnect the power cord plug immediately. · A short may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need to be made. 6 Safety Precautions CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of opt ...