PICTURE SOUND 15.2 Diagonal LCD TV TV/AV F.P. INDEX HOLD SET UP TV/TEXT 1 4 ASPECT 2 5 8 VCR 3 6 9 7 C 0 Operating Instructions Model No. TX-15LT2 Please read these instruction before operating your set and retain them for future reference. TQBC 0355-1 Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new 15.2 Diagonal LCD TV. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Warnings and precautions ............................... 3 Before Operating This Set ................................ 4 Supplied Accessories ............................................. 4 Fitting remote control batteries .............................. 4 Receiver Location .................................................. 5 Optional External Equipment ................................. 5 For optimum quality picture ................................... 5 How to use the LCD stand ..................................... 5 Setup menu ..................................................... 17 Tuning menu-overview ................................... 18 Programme edit ................................................... 19 Auto setup ............................................................ 21 Manual tuning ...................................................... 22 Shipping condition .............................................. 23 Owner ID .............................................................. 24 Quick start Guide .............................................. 6 1. Choose Your Connection Type .......................... 6 2. Connecting the AC Adaptor ............................... 7 3. Switch TV ON .................................................... 7 4. Auto set up ......................................................... 7 5. Owner ID ............................................................ 8 6. The two basic functions ..................................... 8 Aspect Controls .............................................. 25 Tuning your VCR and satellite reciver .......... 27 Advanced Remote Control Operation ........... 28 VCR / DVD Operation .......................................... 28 TELE TEXT .......................................................... 29 Connections .................................................... 32 How to connect the input terminals ...................... 32 How to connect the AUDIO OUT terminals .......... 33 Connecting Headphones / Earphones ................. 33 Basic controls ................................................... 9 Side panel controls and Remote control ................ 9 Using the On Screen Displays ....................... 12 Picture menu ................................................... 13 Sound menu .................................................... 15 Troubleshooting .............................................. 34 Maintenance .................................................... 34 Specifications .................................................. 35 2 Warnings and Precautions · This TV set is designed to operate on DC 15V. · To prevent damage which might result in electric shock or fire, do not expose this TV set to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV. · WARNING : HIGH VOLTAGE!!! Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside. · TV Games / Home Computers Extended use of TV games or home computers with any television set can cause a permanent `shadow' on the screen. This type of irreversible LCD panel damage, can be limited by observing the following points: · Reduce the brightness and contrast levels to a minimum viewing level. · Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on the LCD TV screen. · Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode. · This type of LCD panel damage, is not an operating defect, and as such is not covered by the Panasonic warranty. ·The On/Off switch on this model does not fully disconnect the TV from the mains supply. Remove the mains plug from the wall socket when the TV set is not used for a prolonged period of time. Note: · If the set is not switched off when the TV station stops transmitting, it will automatically go to stand-by mode after 30 minutes. This function will not operate when the TV is in AV mode. · Cabinet and LCD panel care Remove the mains plug from the wall socket. The cabinet and LCD panel can be cleaned with a soft cloth moistened with mild detergent and water. Do not use solutions containing benzol or petroleum. · When ambient temperature is cool, the picture may take a short time to reach normal brightness, but this is not a malfunction. (After brief moment, the picture will have normal brightness.) · Adequate ventilation is essential to prevent failure of electrical components, we recommend that a gap of at least 10cm is left all around this television receiver even when it is placed inside a cabinet or between shelves. · Avoid exposing the TV set to direct sunlight and other sources of heat. FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY This appliance is supplied with a fitted three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. If the fuse is replaced then the replacement fuse must be 5 amp rated and should be approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. If the fitted plug has a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. Replacement fuse covers can be purchased through your local Panasonic dealer. Example 1 If the fitted moulded plug is replaced, the fuse should be taken out and the cut-off plug disposed of safely. There is danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket. If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified electrician. How to replace the fuse (for plug type shown in example 1): Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit securely into the mains plug (see example 1). How to replace the fuse (for plug type shown in example 2): Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse, then press the fuse cover down securely (see example 2). Example 2 IMPORTANT: -The wires in the mains lead of this appliance are coloured in accordance with the following code :BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this appliance may not correspond to the markings identifying the terminals in your plug, proceed as follows :1. The BLUE wire must be connected to the terminal marked `N' or coloured black. 2. The BROWN wire must be connected to the terminal marked `L' or coloured red. IMPORTANT NOTE: Under no circumstances should either of these wires be connected to the Earth terminal of the three pin plug, marked with the letter `E' or the earth symbol. 3 Before Operating This Set Supplied Accessories Check the accessories before installations. · Operating Instruction book (TQBC0355) · Remote Control Transmitter (EUR511270) PICTURE SOUND SET UP TV/AV · Batteries for the Remote Control Transmitter (2 × R6 (UM3) size) TV/TEXT F.P. INDEX HOLD 1 4 ASPECT 2 5 8 VCR 3 6 9 7 C 0 · AC Adaptor & Mains Lead AC Adaptor: (N0JZHK000003) Mains Lead: (K2CT3AA00001) · Warranty Card Fitting remote control batteries 1 2 Two R6 (UM3) size 3 Slide off the battery cover Insert batteries - note correct polarity (+ and -) Replace the cover · Make sure that the batteries are fitted the correct way round. · Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately. · Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni - Cad) batteries. 4 Before Operating This Set Receiver Location Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture. To insure optimum picture do not position magnetic equipment (motors, fans, other speakers, etc.) nearby. Optional External Equipment The Video/Audio connection between components can be made with shielded video and audio cables. For best performance, we recommend 75 ohm coaxial aerial cable is used. Cables are available from your dealer or electronic supply store. Before you purchase any cables, be sure you know what type of output and input connectors your various components require. Also determine the length of cable you'll need. For optimum quality picture When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light. How to use the LCD stand Adjust the stand to your desired angle. The stand angle can be adjusted between 0 ° forward to 28 ° back. 0 28 5 Quick start Guide 1. Choose Your Connection Type LCD TV 1. Connecting the TV directly to an aerial only Connect the Aerial lead into the TV Aerial socket ( ). Aerial (Not Supplied) Aerial Input socket Aerial socket Aerial Lead or 2. Connection of TV and VCR using Scart and RF Connect the AERIAL to the Aerial in socket of the VCR and an RF cable from the VCR Aerial Out socket to the TV Aerial socket ( ). Aerial (Not Supplied) Aerial Input Socket LCD TV Scart Connections The VCR can also be connected to the TV using a Scart cable. Connect AV1 of the VCR to AV1 Scart socket of this set. RF OUT Notes: · Additional equipment and cables are not supplied. · Further details of audio / video connections can be found on pages 32 and 33. VCR RF IN Mains Socket 6 Quick start Guide 2. Connecting the AC Adaptor 1 Connect the mains lead to the AC Adaptor. 2 Connect the AC Adaptor DC plug to the DC IN socket. 3 1 3 Plug into household mains socket. · Be sure to use the power cord and AC adaptor included in the accessories. · Do not use the AC adaptor for other than the specified equipment. · Unplug the AC adaptor if it is not used for long time. · Do not place any objects on the AC adaptor. · Do not use the AC adaptor outdoors. · Do not attempt to repair the AC adaptor if it is broken or malfunctioning. Refer the servicing to the service representative. · Do not try to open the AC adaptor. · Do not use water or wet cloth for cleaning the AC adaptor. 2 3. Switch TV ON Press the TV to turn the set on. IMPORTANT NOTES There are two ways to switch the TV set to stand-by mode. (A) Press the switch on the LCD TV and check RED LED is lit. OR (B) Press the Stand-by button on the remote control. The TV set cannot be switched on by the remote controller if it was switched to stand-by using method (A) or vice versa if method (B) was used. When programme number up ( )/down ( ) buttons on the side panel of the main part are pressed in stand-by mode, TV turns on. Programmes will appear immediately if your dealer has programmed the TV for you. If the TV has not been programmed for you then Auto setup will begin, your stations will be located, sorted into order and stored ready for use. switch on the LCD Power-Indicator The RED LED when lit indicates that not only the TV set is in stand-by mode but also the external AC adaptor is still on. 4. Auto set up AUTO SETUP IN PROGRESS SEARCHING:PLEASE WAIT 21 68 SETUP : Return to tuning menu TV/AV : To exit 7 Quick start Guide 5. Owner ID You now have the opportunity to enter your details and help the police crack crime see instruction book Change Character Select Return character TV/AV Exit 'STR' Button - Store Owner ID As an added feature, this TV has the option of entering a security code (Owner ID) and personal details into its memory, so that in the unfortunate event of theft it will help the police to trace the owner. Owner ID PIN NUMBER: NAME: HOUSE NO: POST CODE: ABCDEFGHIJKLMNOPQRST U V W X Y Z+ - . 0123456789 PICTURE 1 4 2 5 8 0 3 6 9 Enter required 4 digit Owner ID PIN NUMBER (using 0 to 9 on the remote control) SOUND 7 ...