Electronic Board Operating Instructions [Stand (option)] [Wall-mounting (option)] Stand and wall-mounting kit are optional. With Installation Manual (for qualified service personnel) Model No. UB-7325 Operating Instructions Installation Manual · Before operating this unit, please read these instructions completely. After reading them, preserve them carefully for future reference. · Because of the nature of the print film, all the printed text will remain on the film. · This product is designed for installation by a qualified servicing dealer. Installation performed by non-authorized individuals could cause safety-related problems with the operation of this equipment. · To locate the closest authorized dealer in your area, please call 1-800-449-8989. Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Accessories · · · · · Thermal transfer film . . . . . Markers (red, black, and blue) Operating Instructions . . . . Eraser . . . . . . . . . . . . . Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Q'ty . . .1 1 each . . .1 . . .1 . . .1 · · · · Letter size copy paper . . . . Software CD-ROM . . . . . Software License Agreement Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Q'ty . 20 . .1 . .1 . .1 * The stand and wall-mounting kit are optional. By way of example, this manual describes an Electronic Board which is used with the stand. * USB cable is not included. Things you should keep a record of Attach your sales receipt here For your future reference Date of purchase: _________________________ Serial number: ____________________________ Dealer's name and address: ______________________________________________________________ Tel: Dealer's address: ______________________________________________________________________ Federal Communications Commission Requirements Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Warning: To assure continued FCC compliance, the user must use only the provided power supply cord. Also, any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. · Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. · IBM is a trademark of International Business Machines Corporation in the United States, other countries, or both. · Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. · Adobe, the Adobe logo, Acrobat, the Acrobat logo and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. · SANFORD and EXPO are registered ® U.S. trademarks of SANFORD or its Affiliates. · All trademarks referred to in this manual are property of their respective companies. The information given in this Operating Instructions is subject to change without notice. 2 Table of Contents Page For Your Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before You Start Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 · CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 · Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Installing the Thermal Transfer Film. . . . . . . . . . . . . . . . . . . . . . . 10 Loading Copy Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Making Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 · Copy types and procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Operating Instructions Using the Projector Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Replacing the Thermal Transfer Film . . . . . . . . . . . . . . . . . . . . . . 14 Using Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Computer Interfacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 · · · · · · · · · System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Contents of CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Installing the drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Installing the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Removing the drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Removing the software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Panaboard Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Daily Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 · Cleaning the screen and the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 · Caring for the eraser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 · Cleaning the printer head, platen roller and pick-up roller . . . . . . . . . . . . . . . . 24 Help Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 · Meanings of error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 · Option and Separately available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Warning about saving data When the system storage device or any of its optional storage device is adversely effected by operational errors, static electricity, electrical noise, vibration, dust or when the power has been cut off due to malfunction, repair or inadvertently, the memory contents may be lost or changed. Before operating the system, make a point of reading the precautionary notes in the Operating Instructions and the help information, and observe them during operation. Please observe carefully the following precaution: · Make absolutely sure that all important data is saved by back-up or the original is saved. The manufacturer hereby declares that it cannot be held accountable for any loss or change in any data stored on floppy disks, hard disks, optical disks, or other memory devices. 3 For Your Safety For Your Safety CAUTION: TO PREVENT RISK OF ELECTRIC SHOCK HAZARD, DO NOT REMOVE THE COVER OF THIS PRODUCT, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE. THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY ACCESSIBLE. The product should be used only with the power cord that is supplied by the manufacturer. CLASS 1 LED PRODUCT 4 Precautions Precautions Never remove the cover, take apart or modify the product. This will void the warranty. Do not position the electronic board in a location where it is unstable. Operating Instructions Do not put drinks, other liquids or heavy items on the tray or screen. After installing or moving the electronic board, lock the casters and set the fall-prevention extension legs. Push to lock Locking the casters (Push this side) Do not use the electronic board in an excessively humid or dusty location. If the electronic board is not going to be used for an extended period of time (e.g., during extended holidays), turn off the power and remove the plug from the wall outlet. 5 Precautions Do not lean against the screen or on the cover (lower), even if the electronic board is mounted on the wall. CD-ROM To prevent the CD-ROMs from accidental damages: Do not touch or write on the surface of the disc. Do not leave the disc out of the protective case. Do not leave the disc in direct sunlight or near heat sources. Do not place heavy objects on the disc case or drop the case. To clean the disc, hold the disc by its edges and wipe it from the center to the edges with a dry, soft cloth. 6 Precautions Installation · Do not install the unit where it may be exposed to direct sunlight, near heating equipment, or near air-conditioning vents as this may cause stretching and/or discoloration of the screen. · Do not install the unit in strong sunlight or strong lighting. Proper copying may become impossible. · Do not install the unit in locations where the temperature may change suddenly as this may disable the unit's ability to make copies. · Make thick and dark lines inside the copying area. 25 mm (1" ) Note that any writing inside the shaded area (on right) cannot be copied. · Do not allow writing to remain on the screen for an 35 mm Copying area 35 mm extended period of time as it will become harder to (1 3/8" ) (1 3/8" ) erase. · Do not touch the screen, write with markers, or 25 mm (1" ) erase while the screen is moving as this may result in damage to the unit. · Do not erase with an overly dirty eraser (see page 24). · Use a commercially available white board cleaner for hard-to-erase stains. (SANFORD® EXPO® white board cleaner etc.) · Do not attach chart paper to the screen film for copying as this may result in damage to the unit. · Use only the included or designated markers, erasers and thermal transfer film. (See page 28.) Use of accessories other than those included or designated (such as oil-based markers) may damage the screen or result in hard-to-erase markings. · Do not store the thermal transfer film in a location subject to extreme changes in temperature (such as near air conditioning or heating equipment) as this may cause condensation on the thermal transfer film and result in poor print quality and/or paper jams. · The length of one roll of designated thermal transfer film (Replacement film: UG-6001) is approximately 50 meters (164 ft.). One roll of thermal transfer film can make approximately 150 sheets of copies. Note that the total number of copies may differ depending on the operating conditions. Also note that the length of the thermal transfer film supplied with the unit is shorter than the replacement film roll and is only approximately 10 meters (32.8 ft.). · Store markers horizontally as vertical storage may stop the ink from coming out. Screen Film Operating Instructions Markers, Erasers and Thermal Transfer Film Power Cord · When moving the unit, disconnect the power cord from the electrical power socket and from the printer's power connector and coil it for transportation as stepping on the power cord or having it catch on something during movement may result in damage to the cord. · Dispose of the used thermal transfer film in a trash receptacle for burnable trash. · A negative of the copied image will remain on the thermal transfer film. (To protect the security of your information, we recommend cutting up the used thermal transfer film with scissors or shredder before disposing of it.) · Use a shielded USB cable that is certified as logo by USB-IF. · If you connect the electronic board to a USB hub, it is not guaranteed to work. · Do not connect two or more Panasonic electronic boards to a computer. It may cause the computer operation to become unstable. · Light from the projector may enter the eye when using a projector to project images for the purpose of making presentations and so on. Be very careful as direct projector light may hurt the eyes. Replacing the Thermal Transfer Film USB Cable Projector 7 Part Names and Functions Part Names and Functions Scanner Screen One screen (w ...