User manual PENGO SLD1GBSM

MP3 / WMA PLAYER & USB FLASH DRIVE User's Manual Model No. SLD1GBSM Release 1.1 The Product and materials mentioned in this manual are subject to change without prior notice. 1 Caution of Operation 1 Don't squeeze or cast the player to break the plastic case. 2 Don't operate the player in bathroom in high humidity or near the high temperature environment. 3 Don't direct press the LCD panel to damage the display surface. 4 Please do not use the player with earphone while driving an vehicle or riding a bicycle, It is not only dangerous, but also against the law. And please keep your volume down when crossing streets. 5 To prevent static, avoid the extreme dry surroundings. 6 Do not disconnect the player with PC while you copying file. 7 Manufacturer will not take any responsibility of files storage damage which cause by abnormal operation. 8 Please do not cleaning the player with chemicals such as alcohol or thinner. 9 Users are not allowed to repair the player by him/herself. 10 The MP3 player should be no driver need for windows XP/2000/ME except windows 98 (a installation disc is packed in the player box) 11 Set the HOLD switch to the release position before operation. 12 When you use this player as a USB stick, please always follow the correct operation method .Any misuse may cause file lost. 13 Do not drop the player, which probably cause battery fall off or damage its surface. 14 If you don't intend to use your MP3 player for an extended period of time, don't forget to remove the batteries from it to avoid any possibility of damage caused by battery leakage. Player overview Front Power On/Off Play/Pause/Stop Enter / Make Selection LCD Display USB Port Press down for MODE (MENU) Rolling the stick for: Next Track/Forward Previous Track/Rewind On the side HOLD Switch Headphone VOL- VOL+ USB Port 2 LCD USB Connection 1. Installing the driver for Windows 98: (For windows operating system ME/2000/XP or greater, you need not install the driver, please skip this step.) Insert the installation CD-ROM into the CD-ROM drive and driver installation will start. The windows 98 Driver will be finished installation until the last window show out. 2. Connecting PC Before operation, please verify the player is turned off, and one end of the USB cable came with the system is inserted into PC with another end into the MP3 player. Once you connect to your computer, if your player displays <*USB RDY* >, then the USB connection is operational. 3. Download MP3 songs A new drive will show in your computer, you can copy your audio files (in MP3 or WMA format) to your player and the download status will be displayed as follows. 4. Removing USB device 1. Double click the Safely Remove Hardware icon in taskbar: 2. From Safely Remove Hardware screen, highlight "USB Mass Storage Device" item, then click "Stop" button. "Stop to hardware device" appears as shown below. 3 3. Click "OK" button. After the "Safe to Remove Hardware" window appears, the player can be disconnected from PC safely. Warning: An error might occur if remove the connection of the USB cable when transferring data. After data transferred and "Safe to remove hardware "window appeared the player can be removed from PC safely! Attention: This MP3 NOT support format by computer, it will not functional if you use your computer to format it. MP3 Operation Turning the power on/off You can press the button 2 seconds to turn on the MP3 player, the player will power on with the "Pengo" displays. Press the button 3 seconds, the player will save the data and enter the power off mode. Key Lock Function Turn on the hold switch and the screen will show out "Key Lock!", you must unlock it in order to operate your MP3 player. Enter MENU and select function Before you enter menu, please make sure the unit is not playing music, recorded voice or FM radio, you can press stop or pause and then press the Mode button (in the middle of the rolling wheel), 2 seconds to enter the main menu, Roll stick to select the function you want and push button to enter the function you selected, there are: button to Music player, Voice player, Voice Record , FM radio, File Delete, EQ Mode, Repeat, Setting. Playing MP3 music 1. Turning on the power by pressing button for a moment, you could see the following music player mode: no. of songs, song timer, sampling rate and the ID3 display. HA PP Y EV ER YD AY. MP 3 2. When you press button again, the current track will be played as shown above. to select the previous song or the next song. 4 3. If you want to select previous/next song, Rolling stick 4. The music will pause if you press 5. Roll and pressing 6. You can press . to fast forward or fast backward. and hold 2 seconds to view play list and folders, you can choose the song or get into the folder by press button. EQ MODE When the music is playing, you can press the 2 seconds to enter the function menu, and press the button to enter the EQ mode setting, and roll save the selected EQ mode. to select EQ mode: Normal, Classic, Live, Pop, Rock, DBB and press the button to Volume Control You could control the volume by pressing VOL+/VOL-button. The volume steps will increase or decrease when the VOL+/VOLbutton is pressed correspondingly. Voice Recording Function 1. Select Voice Record function in the menu. ( Note: Please stop playing the music before you press ) 2. Press to enter this function, the MP3 player will start to record. You can stop record by press again The MP3 player will automatically switch to Voice Player mode when you stop recording. Playback recorded voice 1. When you in Music Player mode, you can go to Voice Player mode by press and roll it then to enter. Go back to Music Player mode When you in other mode, if you want to enjoy the music, you can press 5 and roll it to select Music Player in the menu, then press to go back. FM radio( frequency modulation mode) 1. Select FM Radio function in the menu. (Note: Please stop playing the music before you press ) ,roll it to Frequency then 2. You can rolling to choose station. If you want choose by frequency, please press press select. to select. If you want choose by preset you saved, please press ,roll it to Preset, then press to 3. Save FM station to Preset: After make selection the channel, press ,roll it to Save Preset then press and choose preset number and press again, then your station will be saved to you the number you selected. This player can save 30 sations. 4.. FM recording After make selection the frequency and press key roll it to" FM record" then press , the unit will start to record. Note: Doesn't like Voice Record, after you press to stop recording, it will automatically back to Music Player mode. Repetition mode After select Repeat function in the menu. ( Note: Please stop playing the music before you press ), roll the to select the Repeat mode, and then press the button to make the selection Delete files 1. Select File Delete function in the menu. ( Note: Please stop playing the music before you press ) 2. Select the file you want to delete by rolling and press to delete. 6 TRACK:002 TRACK:002 3. After you deleted your file, press to return to menu. Setting Options Press , roll to Setting and press to get into the settings. In each setting, you can roll to select the options and press 1.Language to confirm your selection. You can select English, simplified Chinese characterGB2312, and traditional Chinese characterBig5,Korean, Japanese, German, French, Italian, Spanish, etc. 2. LCD Contrast Level You can adjust the contrast level to low, level 1, level 2, level3, level 4, and level high. 3. Back Light You can setup how long the backlight will last according to your demands.You may choose to turn off the backlight or let the backlight on for 0, 3, 6 ,9, 12,15,seconds each time the button is pressed. 4. Bitrate You can choose the recording Bitrate 32kbps,64kbps,96kbps,112kbps,128kbps or 192kbps, the bigger number the better quality and will cost more memory capacity. 5. Format memory Attention: This MP3 NOT support format by computer, if you need format memory, please MP3's Format function as below. 6. Reset Setting This function will reset your setting for factory defaults. 7. Memory Info You could check the memory size without connecting to the PC. 7 Troubleshoot 1 Power on and no display Check and exchange the battery 2Power on and no sound Check the Hold witch is on or not 3Playing music but no sound Check the volume level is too low 4Can not play the music Please the MP3 and WMA file is out of the requirement of the operation specification (please refer to the operation specification pages of this manual) 5VBR MP3 Music File Due to the timer counter of the VBR MP3 Music has a different from the fixed compression rate file. The timer display of the VBR file will vary with different compression rate. 6Some Music File can't play Please check the following: 1 MP3 file should be in MPEG 1 Layer 3. 2 MP3 files playback with multiple bit-rates and sample rates supported (32Kbps ~ 320Kbps) 3 WMA files playback with multiple bit-rates and sample rates supported (64Kbps ~ 192Kbp) 7Bad Song Problem Bad Song definition: 1. The songs are not completed down load from PC (sudden disconnection the USB cable). 2. The MP3 songs are not in MPEG1 Layer3. 3. The WMA songs are not in the sample rate range 64kbps- 192kbps If the play detect the bad song and it will auto skip to next. 8USB Connection Problem Please check the following: 1) The cable connection between the PC and player is loose and bad contact. 2)Never disconnect the cable in progress of the files downloading between PC and player (it will cause the some bad songs/files and the player may be halt). 9Sudden stop of the player when the music is playing Please check the following: 1) Please the reset switch is used to on or not. 2) Please the battery is finishing or not. There are too many bad songs in the download file Safety and Caution: 1 Never listen the music in the highest sound level in long time and it will bad for health in listening. 2 Never disassemble the player by user. 3 Never operation or listen the player in driving car or motorcycle. Support: For tech support or RMA request, please write your email to support@pengo.com or call 1-888-PENGO99 www.pengo.com 8