MP3 / WMA PLAYER & USB FLASH DRIVE User's Manual For Model SLD512AT, SLD1GBAT Only Release 1.0 The Product and materials mentioned in this manual are subject to change without prior notice. 1 Caution of Operation 1 Don't squeeze or cast the player to break the plastic case. 2 Don't operate the player in bathroom in high humidity or near the high temperature environment. 3 Don't direct press the LCD panel to damage the display surface. 4 Please do not use the player with earphone while driving an vehicle or riding a bicycle, It is not only dangerous, but also against the law. And please keep your volume down when crossing streets. 5 To prevent static, avoid the extreme dry surroundings. 6 Do not disconnect the player with PC while you copying file. 7 Manufacturer will not take any responsibility of files storage damage which cause by abnormal operation. 8 Please do not cleaning the player with chemicals such as alcohol or thinner. 9 Users are not allowed to repair the player by him/herself. 10 The MP3 player should be no driver need for windows XP/2000/ME except windows 98 (a installation disc is packed in the player box) 11 Set the HOLD switch to the release position before operation. 12 When you use this player as a USB stick, please always follow the correct operation method .Any misuse may cause file lost. 13 Do not drop the player, which probably cause battery fall off or damage its surface. 14 If you don't intend to use your MP3 player for an extended period of time, don't forget to remove the batteries from it to avoid any possibility of damage caused by battery leakage. This MP3 can not play license protected files, please make sure your files do not have any copy protection. Player overview Front Power On/Off Play/Pause/Stop Enter / Make Selection LCD Display USB Port Press down for MODE (MENU) Rolling the stick for: Next Track/Forward Previous Track/Rewind On the side HOLD Switch Headphone VOL- VOL+ USB Port 2 LCD USB Connection 1. Installing the driver for Windows 98: (For windows operating system ME/2000/XP or greater, you need not install the driver, please skip this step.) Insert the installation CD-ROM into the CD-ROM drive and driver installation will start. The windows 98 Driver will be finished installation until the last window show out. 2. Connecting PC Before operation, please verify the player is turned off, and one end of the USB cable came with the system is inserted into PC with another end into the MP3 player. Once you connect to your computer, if your player displays <*USB RDY* >, then the USB connection is operational. 3. Download MP3 songs A new drive will show in your computer, you can copy your audio files (in MP3 or WMA format) to your player and the download status will be displayed as follows. 4. Removing USB device 1. Double click the Safely Remove Hardware icon in taskbar: 2. From Safely Remove Hardware screen, highlight "USB Mass Storage Device" item, then click "Stop" button. 3. Click "OK" button. After the "Safe to Remove Hardware" window appears, the player can be disconnected from PC safely. Warning: An error might occur if remove the connection of the USB cable when transferring data. After data transferred and "Safe to remove hardware "window appeared the player can be removed from PC safely! This MP3 NOT support FORMAT by computer, it will not functional if you use your computer to format it. If you press mode stick when MP3 connected to computer, the MP3 will disconnect and you can operate it without battery, your computer USB port will be a power source. 3 MP3 Operation Turning the power on/off You can press the button 2 seconds to turn on the MP3 player, the player will power on with the "Pengo" logo displays. Press the button 3 seconds, the player will save the data and enter the power off mode. Key Lock Function Turn on the hold switch and the screen will show out , you must unlock it in order to operate your MP3 player. Enter MENU and select function After turn on the MP3 player you will see the main menu. press Roll stick to select the function you want and button (in the middle of the rolling wheel) to enter the function you selected there are: Music player , Voice Record ,Voice player , FM radio , System Setting Ø After you turn the MP3 off normally, the player will remember the last function you selected. Playing MP3 music 1. Enter the Music player the ID3 Tag display. mode. you could see the following music player mode: no. of songs, song timer, file format and 2. When you press button, the current track will be played as shown above. to select the previous song or the next song. 3. If you want to select previous/next song, Rolling stick 4. The music will pause if you press 5. Roll and pressing . to fast forward or fast backward. and hold 2 seconds then release it. 6. If you want go back to main menu, please press 7. When the music is NOT playing, you can press once to view folder list, you can choose the folder by rolling stick and press it to get into the folder then press button to go back to music play mode. 4 EQ Mode and Repetition Mode When the music is playing, you can press the once to enter the sub menu, roll to select Equalizer or Repeat setting and press button to enter the setting. 1. In EQ setting, please roll to select EQ mode: Natural Rock Pop Classical Soft Jazz DBBand press the 2. Repeat setting: button to save the selected EQ mode. Random Repeat One Folder Repeat All Intro play the music in the file randomly play a piece of music continuously all the music in the file play all the music in the file continuously play ex-10 seconds of all the music in orde Volume Control You could control the volume by pressing VOL+/VOL-button. The volume steps will increase or decrease when the VOL+/VOLbutton is pressed correspondingly. Voice Recording Function 1. Select Voice Record function in the menu. and press to enter. 2. Press to enter this function, the MP3 player will ready to record. 3. Press to start recording, press to pause and press and hold 2 seconds to stop recording and save file. If the shows "Lisfis full" ,then you should change other menu, because there are no more than 99 files in f. When voice is recording .only "Play" button is valid. Playback recorded voice 1. Select Voice player function in the menu. and press to enter. 2. Press to enter this function, then press to play. Go back to Music Player mode When you in other mode, if you want to enjoy the music, you can press and hold it for more than 2 seconds and release it, when you see the main menu , then roll to select Music Player in the menu 5 , then press . FM radio( frequency modulation mode) 1. Select FM radio function in the menu. and press to enter. 2. You can rolling to choose station by frequency or press to select preset stations. 3. Automatically browse stations. Roll and hold key 2 seconds, the player will browse forward or back ward at the speed of 100KHZ, and stop at the exist channel, if you want stop, roll once. 4. Save FM station to Preset: After make selection the channel, press channels. 5. FM recording. After make selection the frequency and press key, roll it to choose record mode then ,roll it to then press to save it. You can save up to 20 press please press , the unit will start to record. If you want to pause the recording, please press . . If you want to stop recording, Setting Options Select System Setting function in the menu get into the settings. In each setting, you can roll and press to enter. Roll to choose settings and press to confirm your selection. If you to to select the options and press want cancel and back to Setting menu, you may press . Brift introduction for settings: Record time Backlight time Language select Player close setting Re-player setting Contrast adjust Connection mode Memory mode Firmware version Quit Set the time and date for the record file Last time when without any other press Set the different Language Set a time for player close Set the replay Set the contrast For the choose of "disk password" To check the capacity of disk Display the firmware Quit the interface 6 1. Record time Press "Vol+" or "Vol-" to set year/ month /day and roll 2. Back Light You can setup how long the backlight will last according to your demands. You may roll the backlight on for 3, 6 ,9, 12,15,seconds each time the button is pressed. 3. Language You can select English, simplified Chinese characterGB2312, and traditional Chinese characterBig5,Korean, Japanese, German, French, Italian, Dutch, Portuguese, Spanish, Polish. 4. Power Off "Power save mode" : you can set a time "seconds" to close the player ,when set "0" shows the Functions is not valid. "Sleeping mode" : you can set a time "seconds" to close the player, it is good for listening music Before sleep. Note: you should set sleeping mode for every time. 5. Replay mode "Manual replay" : indicate you can set the stop point by yourself during A-B replaying "Auto replay" : indicate the stop point can be set automatically during A-B replaying (suit for The recitation without music) 6. Contrast You can adjust the contrast level 1 to 16. 7. Memory info It shows the total memory percentage indicates the rate of memory used. choose to turn off the backlight or let to change it. Troubleshoot 1 Power on and no display Check and exchange the battery 2Power on and no sound Check the Hold witch is on or not 3Playing music but no sound Check the volume level is too low 4Can not play the music a. This MP3 player only can play MP3WMAWMVASF file format and the bit rate is from 5K bps to 384K bps, Please check your file is out of the requirement. 5VBR MP3 Music File Due to the timer counter of the VBR MP3 Music has a different from the fixed compression rate file. The timer display of the VBR file will vary with different compression rate. 6Some Music File can't play Please check the following: a. MP3 file should be in MPEG 1 Layer 3. b. MP3 files playback with multiple bit-rates and sample rates supported (5Kbps ~ 384Kbps) 7 c. This MP3 can not play license protected file download from internet, please make sure your file without any copy protection. 7Bad Song Problem a. The songs are not completed down load from PC (sudden disconnection the USB cable). b. The MP3 songs are not in MPEG1 Layer3. 8USB Connection Problem Please check the following: 1) The cable connection between the PC and player is loose and bad contact. 2)Never disconnect the cable in progress of the files downloading between PC and player (it will cause the some bad songs/files and the player may be halt). Safety and Caution: 1 Never listen the music in the highest sound level in long time and it will bad for health in listening. 2 Never disassemble the player by user. 3 Never operation or listen the player in driving car or motorcycle. Support: For tech support or RMA request, please write your email to support@pengo.com or call 1-888-PENGO99 www.pengo.com 8