electronic user's manual file:///D|/EDFU/crt_17_6/edoc/english/107S/manual.html2005-05-23 ¤U¤È 04:31:21 Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance · Troubleshooting · Regulatory Information · Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: q q q q q q q Disconnect the monitor from the power supply if the monitor is not to be used for an extended period of time. Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover should only be removed by qualified service personnel. Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them and prevent proper cooling of the monitor's electronic devices. To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or excessive moisture. Do not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with a slightly damp cloth. Disconnect the monitor from the power supply before cleaning. When positioning the monitor, make sure the power plug and outlet are easily accessible. When using the monitor, please make sure to install the swivel base for safety concern. Consult a service technician if the monitor does not operate normally when operating instructions of this manual are followed. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/107S/SAFETY/SAFETY.HTM2005-05-23 ¤U¤È 04:31:26 About This Electronic User's Manual About This Electronic User's Manual About This Guide · Other Documents You May Need · Notational Descriptions About This Guide This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the monitor's features, setup, operation and all other information, which is the same exact information described in our printed version. The sections are as follows: q q q q q q q q q Safety and Troubleshooting Information provides tips and solutions for common problems, and other related information you may need. About This Electronic User's Manual gives overview of what information are included as well as notation icon descriptions and other documentation you can refer to. Product Information gives an overview of the monitor's features and as well as the technical specifications for this monitor. Installing Your Monitor describes the initial setup process and gives an overview of how to use the monitor. On Screen Display provides information on adjusting the settings on your monitor. Customer Care and Warranty is a list of worldwide Philips consumer information centers along with the help desk phone numbers and information on the applicable warranty of your product. Glossary provides more information for technical terms. Download allows users to install the entire manual on their hard drive. Frequently Asked Questions provides answers to commonly asked questions. RETURN TO TOP OF THE PAGE Other Documents You May Need In addition to this Electronic User's Guide, you may need to refer to the following documentation: file:///D|/EDFU/crt_17_6/edoc/english/107S/ABOUT/ABOUT.HTM (1 of 3)2005-05-23 ¤U¤È 04:31:26 About This Electronic User's Manual q Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the monitor. This is included with this product. RETURN TO TOP OF THE PAGE Notational Descriptions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: This icon indicates important information and tips that help you make better use of your computer system. CAUTION: This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data. WARNING: This icon indicates the potential for bodily harm and tells you how to avoid the problem. SMART HELP: This icon indicates helpful information when adjusting the On Screen Display of your monitor. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/107S/ABOUT/ABOUT.HTM (2 of 3)2005-05-23 ¤U¤È 04:31:26 About This Electronic User's Manual ©2006 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. file:///D|/EDFU/crt_17_6/edoc/english/107S/ABOUT/ABOUT.HTM (3 of 3)2005-05-23 ¤U¤È 04:31:26 107S Product Information Product Information Product Features · Lead-free product · Technical Specifications · Automatic Power Saving · Physical Specification · Pin Assignment · Product Views Product Features Model 107S70 107S71 107S76 107S77 Regulation TCO'03 MPRII MPRII TCO'03 Color Grey Grey Black Blue/Silver 107S7 q q q q q q q q 17-inch (16.0" VIS) color monitor with excellent front of screen performance for use with MACs and PCs Autoscan covers horizontal frequencies up to 71 kHz offering a maximum resolution of 1280 x 1024 with flicker free display of 1024 x 768 at up to 89 Hz. Real Flat High Contrast CRT with high-resolution 0.25 mm dot pitch (0.21 hdp). Large screen display in a small footprint: 17-inch conventional monitor with maximum depth of only 424 mm/16.7" Multimedia Base option. sRGB for true on screen color representation. FCC, CE (in selected countries only) and ISO9241, ISO14001 certified High Bright hot key dleivers 4 suitable brightness instantly for text, internet, game and multimedia. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/107S/PRODUCT/PRODUCT.HTM (1 of 7)2005-05-23 ¤U¤È 04:31:27 107S Product Information Lead-free product Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health and promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Philips complies with the European Community stringent RoHS Directive mandating restrictions on hazardous substances in electrical and electronic equipment. With Philips, you can be confident that your display device does not harm the environment. Technical Specifications* CRT · Size and deflection · Dot pitch · Horizontal pitch · Tube type · Phosphor · Recommended display area · Maximum display area 17 inch / 41 cm ; 90° deflection angle 0.25 mm 0.21 mm Shadow mask, real flat, high contrast, anti-glare, anti-static, anti-reflection P22 12.0" x 9.0" / 306 x 230 mm 12.8" x 9.6" / 325 x 244 mm SCANNING · Horizontal scanning · Vertical scanning 30 - 71 KHz 50-160 Hz VIDEO · Video dot rate · Input impedance - Video - Sync · Input signal levels · Sync input signal · Sync polarities 75 Ohm 1.8 kOhm 0.7 Vpp Separate sync Positive and negative 180 MHz file:///D|/EDFU/crt_17_6/edoc/english/107S/PRODUCT/PRODUCT.HTM (2 of 7)2005-05-23 ¤U¤È 04:31:27 107S Product Information WHITE COLOR TEMPERATURE Chromaticity CIE coordinates: · at 9300 degrees K · at 6500 degrees K · at sRGB x = 0.283 / y = 0.297 x = 0.313 / y = 0.329 x = 0.313 / y = 0.329 PRESET MODES 720 x 400 @ 70 Hz 640 x 480 @ 60 Hz 640 x 480 @ 85 Hz 800 x 600 @ 75 Hz 800 x 600 @ 85 Hz 1024 x 768 @ 75 Hz 1024 x 768 @ 85 Hz 1280 x 1024 @ 60 Hz sRGB file:///D|/EDFU/crt_17_6/edoc/english/107S/PRODUCT/PRODUCT.HTM (3 of 7)2005-05-23 ¤U¤È 04:31:27 107S Product Information sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital cameras, monitors, printers, scanners, etc.) Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen. Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting in the monitor's OSD. To do so, open the OSD by pressing the MENU button on the front of your monitor. Use the down button to go to Color temperature and press NENU again. Then move the down button to go to sRGB and press MENU again. Exit this OSD. After this, please don't change the brightness or contrast setting of your monitor. If you change either of these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K. * These information are subject to change without notice. RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or other input device is detected, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving features: Power Management Definition VESA's Mode Video H-sync V-sync Power Used Power Saving (%) LED color file:///D|/EDFU/crt_17_6/edoc/english/107S/PRODUCT/PRODUCT.HTM (4 of 7)2005-05-23 ¤U¤È 04:31:27 107S Product Information Active ON Yes Yes < 75 W < 2W < 2W 0% Green Flashing Green Off Sleep Switch Off OFF OFF No -- No -- 99% 99% RETURN TO TOP OF THE PAGE Physical Specifications 15.6" x 15.0" x 16.7" / 397 x 382 x 423.5 mm (including base) · Dimensions 15.6" x 13.1" x 16.7" / 397 x 333.5 x 423.5 mm (excluding base) 13.5 kg 100-240 VAC, 60-50Hz (Please refer to rating label) 0° to 40°C / 32° to 104°F -25° to +65°C / -13° to +149°F 5% to 95% · Weight · Power supply · Temperature (operating) · Temperature (storage) · Relative humidity(storage) * Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300°, full white pattern. * These information are subject to change without notice. RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/107S/PRODUCT/PRODUCT.HTM (5 of 7)2005-05-23 ¤U¤È 04:31:27 107S Product Information Pin Assignment The 15-pin D-sub connector (male) of the signal cable (IBM systems): Pin No. 1 2 3 4 5 6 7 8 Assignment Red video input Green video input Blue video input Identical output - connected to pin 10 Self-test Red video ground Green video ground Blue video ground Pin No. 9 10 11 12 13 14 15 Assignment +5V DDC supply Logic ground Identical output - connected to pin 10 Serial data line (SDA) H. Sync / H+V V. Sync (VCLK for DDC) Data clock line (SCL) RETURN TO TOP OF THE PAGE Views Follow the links to see various views of the monitor and its components. file:///D|/EDFU/crt_17_6/edoc/english/107S/PRODUCT/PRODUCT.HTM (6 of 7)2005-05-23 ¤U¤È 04:31:27 107S Product Information Front View Rear View RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_17_6/edoc/english/107S/PRODUCT/PRODUCT.HTM (7 of 7)2005-05-23 ¤U¤È 04:31:27 Installing your Monitor Front View · Rear View Front View Power button switches your monitor on. MENU MENU button which when pressed will take you to the OSD controls Contrast hotkey. When the "(-)" button is pressed, the adjustment controls for the CONTRAST will show up. (-) (+) Brightness hotkey. When the "(+)" button is pressed, the adjustment controls for BRIGHTNESS will show up. High Bright hot key delivers 4 suitable brightness instantly for text, internet, game and multimedia. RETURN TO TOP OF THE PAGE Rear View 1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. RETURN TO TOP OF THE PAGE On-Screen Display Description of the On-Screen Display · The OSD Tree · The OSD Controls Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly through an on-screen instruction window. The user interface provides userfriendliness and ease-of-use when operating the monitor. Basic and simple instruction on the control keys. On the front controls of your monitor, once you press the MENU button, the On Screen Display (OSD) Main Controls window will pop up and you can now start making adjustments to your monitor's various features. Use the (-) (+) to make your adjustments within. RETURN TO TOP OF THE PAGE On-Screen Display The OSD Tree Below ...