|
Need help using a product?
|
|
|
|
User manual PHILIPS 32PFL7403D
Diplodocs help download the user guide PHILIPS 32PFL7403D TV.
This product, although classified under the brand PHILIPS, may have been manufactured by GEMINI INDUSTRIES, NORELCO, RADIOLA after mergers, acquisitions, or a change in name.
Manual abstract: user guide PHILIPS 32PFL7403D
Detailed instructions for use are in the User's Guide. Register your product and get support at
www.philips.com/welcome
32PFL7403 42PFL5603 47PFL5603 42PFL5403
EN LCD television ________________________________
1 1.1 1.2 1.3 2 2.1 2.2 3 3.1 3.2 3.3 3.4 3.5 4 4.1 4.2 4.3 4.4 4.5 4.6 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 5.11 6 6.1 6.2 6.3 6.4 6.5 6.6
Important 3 Safety 3 Care of the screen 3 Recycling 3 Your TV 4 Television overview 4 Product highlights 5 Getting started 5 Position the TV 5 Wall mounting - VESA 6 Remote control batteries 7 Antenna cable 7 Power cable 7 Use your TV 8 Turn on or off - Standby 8 Watch TV 8 Watch channels from a digital receiver 9 Watch connected devices 9 Watch a DVD 9 Select a Teletext page 9 Use more of your TV 10 Remote Control 10 TV menus 11 Picture and sound settings 13 Teletext 16 Create favourite channel lists 17 Electronic Programme Guide 18 Timers and locks 19 Subtitles 20 Watch and play photos, MP3... 21 Listen to digital radio channels 22 Software update 23 Channel installation 25 Automatic channel installation 25 Manual channel installation 26 Rearrange stored channels 26 Channel management 27 Digital reception test 27 Factory settings 27
7 7.1 7.2 7.3 7.4 8 9 10
Connections (DVD, receiver, ...) 28 Connections overview 28 About connections 29 Connect your devices 31 Setup devices 34 Technical data 36 Troubleshooting 37 Index 39
Register your product and get support at www.philips.com/welcome.
Table of contents
1
ENGLISH
Table of contents
2008 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied. Warranty No components are user-serviceable. Do not open or remove covers and do not insert objects in the ventilation slots or insert objects not suitable for the specific connectors. Repairs may only be done by Philips Service Centres and official repairshops. Failure to do so shall void any warranty, stated or implied. Any operation expressly prohibited in this manual, any adjustments, or assembly procedures not recommended or authorised in this manual shall void the warranty. Pixel characteristics This LCD product has a high number of colour pixels. Although it has effective pixels of 99,999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen.This is a structural property of the display (within common industry standards) and is not a malfunction. Open source software This television contains open source software. Philips hereby offers to deliver or make available, upon request, for a charge no more than the cost of physically performing source distribution, a complete machinereadable copy of the corresponding source code on a medium customarily used for software interchange. This offer is valid for a period of 3
years after the date of purchase of this product. To obtain the source code, write to Philips Innovative Applications N.V. Ass. to the Development Manager Pathoekeweg 11 B-8000 Brugge Belgium Compliance with EMF Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips' leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.
Copyrights
VESA, FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association.
Manufactured under license from Dolby Laboratories. `Dolby', `Pro Logic' and the double D symbol G, are trademarks of Dolby Laboratories.
Manufactured under license from BBE Sound, Inc. Licensed by BBE, Inc under one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are registered trademarks of BBE Sound Inc. The "HD Tick" Logo is a trademark of AEEMA. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries ® Kensington and MicroSaver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world. All other registered and unregistered trademarks are the property of their respective owners.
2
Read this user manual before you start to use this product. Pay attention to this section and closely follow the instructions. The warranty does not apply to damage caused by not taking into account the instructions.
· Stationary images Avoid stationary images as much as possible. If you cannot, reduce screen contrast and brightness to prevent damage to the screen. Stationary images are images that remain on the screen for a long time. Examples of stationary images are: on screen menus, teletext pages, black bars, stock market information,TV channel logos, time displays, and so on.
1.1
Safety 1.3 Recycling
· To avoid short circuit, do not expose the product to rain or water. · To avoid a risk of fire or electric shock do not place naked flame sources (e.g. lighted candles) close to the TV. · Leave a space of at least 10cm (4 inches) all around the TV for ventilation. · Keep away from radiators or other heat sources. · Do not install the TV in a confined space such as a book case. Make sure that curtains, cupboards and so on cannot obstruct the air flow through the ventilation slots. · To prevent damage, do not insert any object into the ventilation slots. · Make sure the TV cannot fall down. Place the TV on a solid and flat surface and only use the stand provided with the TV. · To prevent damaging the mains cord, do not place the TV, or anything else, on the cord. Damage the cord may cause a fire or electric shock. · When mounted on a swivel stand or VESA wall bracket avoid force coming on the mains plugs. Mains plugs that are partly loosened can cause arcing or fire.
· Take the packaging to your local recycling centre. · Dispose old batteries safely according local regulations. · This product is designed and manufactured for material recycling and re-use. · Do not dispose this product with other household waste. Inform yourself or ask your dealer about local environmentally safe recycling and local regulations. Uncontrolled waste disposal harms the environment and human health. (EEC 2002/96/EC)
1.2
Care of the screen
· Unplug the TV before cleaning. · Clean the surface with a soft damp cloth. Do not apply any other substance (chemical or household cleaning agent). This may damage the screen. · Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the screen permanently. · To avoid deformations and colour fading, wipe off water drops as soon as possible.
Important
3
ENGLISH
1
Important
2
Your TV
This section gives you an overview of the controls and functions of this TV.
2.1
Television overview
Remote control
Control
1
4
TELETEXT DEMO SOURCE SUBTITLE
VOLUME
2 3 4
3
MENU
GUIDE INFO
PROGRAM
2 1
BACK
OK
OPTION
5
EXIT MENU
BROWSE
POWER
6
5
1 2 3 4 5
Power switch Program/Channel up and down Menu Volume up and down Remote control sensor
P
7 8
1 4 7
MHEG CANCEL
2 5 8 0
3 6 9
Connectors
2 1
1 Back connectors 2 Side connectors For more info see section 7 Connections.
1 2 3 4 5 6 7 8
Turn On or switch to Standby Source Teletext Colour keys Navigation keys Menu On or Off Program/Channel up + and down Volume up + or down -
For more info see section 5.1 Remote control overview.
4
Your TV
2.2
Product highlights
Your new TV is equipped with some of the most modern audio or video innovations. Your TV offers the following advantages ... Full High Definition LCD display (42-47PFL5603D only) A full HD resolution of 1920x1080p, the highest resolution of HD sources. It offers a brilliant flickerfree progressive scan picture with optimum brightness and superb colours. Pixel Plus Offers perfect picture quality from any source. 100Hz Clear LCD 100Hz Clear LCD gives a superior motion sharpness, better black level,high contrast with a flicker-free, quiet image and a larger viewing angle. DVB-T integrated tuner Next to normal analogue TV broadcast your TV receives digital terrestrial TV and radio broadcasts. Digital broadcasting Australia : see www.dba.org.au Electronic Programme Guide - EPG The EPG shows the scheduled digital TV programmes on screen. The guide can remind you when programmes start, switch the TV on, etc.
This section helps you with the positioning and the first time installation of the TV.
3.1
Position the TV
Carefully read the safety precautions in section 1.1 Safety before you position the TV. · Large screen TVs are heavy. Carry and handle the TV with at least two persons. · The ideal distance from which to watch TV is three times its diagonal screen size. · Position the TV where light does not fall directly on the screen. · Your TV is equipped with a Kensington Security Slot at the back of the TV for an anti-theft lock (not supplied).
On 32" TV model. HDMI connectors HDMI connectors for highest quality high definition connectivity. USB connection Multimedia connection for instantly view or play your photos or music.
On 42" and 47" TV model.
Your TV
5
ENGLISH
3
Get started
3.2
Wall mounting - VESA
) Warning Wall mounting of the TV should only be performed by qualified installers. Koninklijke Philips Electronics N.V. bears no responsibility for improper mounting that results in accident or injury.
® Using a cross-head screwdriver (not supplied), unscrew the four bolts that secure the stand to the TV.
Step 1 Purchase a VESA-compatible wall bracket Depending on the size of your TV screen, purchase one of the following wall brackets: TV screen size (inches/ cm) 32"/81cm VESAcompatible wall bracket type (millimeters) Adjustable 300 x 300 Special instructions Ã’ Firmly pull the stand from the bottom of the TV. Place both the stand and bolts in a secure location for future reinstallation.
42"/107cm or larger
The VESAcompatible bracket must be adjusted to 200 x 300 before securing to the TV Fixed 400 x 400 None Step 3 Secure the VESA-compatible wall bracket to the TV Locate the four mounting nuts at the back of the TV.
Step 2 Remove the TV stand rNote These instructions are only applicable to TV models with mounted stands. If your TV stand is not mounted, skip to Step 3 Secure the VESAcompatible wall bracket to the TV. Carefully place the TV face down on a flat, stable surface that is covered by soft cloth. The cloth should be thick enough to protect your screen.
4x
® Continue with the instructions provided with your VESA-compatible wall bracket. rNote When securing the VESA-compatible wall bracket to your TV, use M6 bolts for 32 inch models or M8 bolts for larger models (bolts not supplied).
6
Your TV
3.3
Remote control batteries
3.5
Power cable
ENGLISH
Open the battery cover on the back of the remote control. ® Insert the 2 batteries supplied (Type AAALR03-1,5V). Make sure the + and - ends of the batteries line up correctly (inside of case is marked.) Ò Close the cover.
Keep the mains plug at the wall socket accessible at all time. The TV is never powered off completely and consumes energy unless the mains cord is physically unplugged. Although this TV has a very low standby power consumption, unplug the mains cord if you do not use the TV for a long time to save energy. Verify that your mains voltage corresponds with the voltage printed on the sticker at the back of the TV. Do not insert the mains cord if the voltage is different. ® Insert the mains cord tightly.
rNote Remove the batteries if not using the remote control for an extended period of time.
3.4
Antenna cable
On 32" TV model.
Locate the antenna connection at the back of the TV. ® Insert the antenna cable tightly into the Antenn ...
|