www.philips.com/support Model Serial Country Austria Belgium Denmark Finland France Germany Greece Ireland Italy Luxemburg Netherlands Norway Portugal Spain Sweden Switzerland UK Poland Chech Rep Hungary Slovakia Number 0820 901114 070 222 303 3525 8759 09 2311 3415 08 9165 0005 0180 5 356 767 0 0800 3122 1280 01 601 1777 199 404 041 40 6661 5644 0900 8407 2270 8111 2 1359 1442 902 888 784 08 5792 9100 0844 800 544 0906 1010 016 0223491504 800142840 0680018189 0800004537 Tariff 0.20/min 0.17/min local local 0.23/min 0.12/min free local 0.25/min local 0.20/min local local 0.15/min local local £0.15/min local free free free Introduction GB Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We strongly recommend that you read it thoroughly. Table of Contents Recycling The packaging of this product is intended to be recycled. Apply to the local authorities for correct disposal. Disposal of your old product Your product is designed and manufactured with highly quality material and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2002/976/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose off your old products with your normal household waste. The correct disposal of your product will help prevent potential negative consequences for the environment and human health. 1 Safety information 10 cm 10 cm 10 cm X When cleaning the surface or the screen of the set, wipe gently with absorbent cotton or cloth or other soft material like chamois. Do not use too wet a cloth which is dripping with water. Do not use acetone, toulene or alcohol to clean the TV. As a safety precaution, unplug the power cord from the mains. Leave at least 10 cm around each side of the TV set to allow for proper ventilation. Place the set on a stable, level surface. Never cover the ventilation slots of the TV with a cloth or other material. It may cause overheating. Do not insert anything in the ventilation holes. If metal or something flammable is inserted in these holes, it may result in fire or electric shock. X X Take care not to connect too many equipment to the same mains socket as it may cause overloading resulting in fire or electric shock. Pull the power lead by the plug. Do not pull on the power lead. Do not use a poor fitting mains socket. Insert the plug fully into the mains. If it is loose, it may cause arching and result in fire. X X To prevent fire or shock hazard, do not expose your TV to rain or moisture. No naked flame sources (lighted candles) should be placed on the top of the set or near it. X X Avoid placing your TV set under direct sunlight or heat. As a safety precaution, do not touch any part of the TV, power lead or aerial lead during lightning storms. X Installation of the TV set on the wall should be carried out by qualified serviceman. Improper and incorrect installation may render the set unsafe. Avoid placing vase filled with water on the TV. Water spilled into the set could result in electric shock. Do not operate set if water is spilled into it. Have it checked immediately by a qualified serviceman. 2 Preparation / Getting started 1 Positioning the TV set 10 cm 10 cm 10 cm 3 Using the Remote Control Place your TV set on a solid stable surface, leaving a space of at 10 cm around the set. 2 Connections 4 Pull out the plastic insulation sheet from the battery to enable the remote control to operate. Switching on the TV set 26" / 32" ­ 26" / 32" 37" . 42" 37" 42" · Insert the aerial plug into the 75 : socket at the bottom of the set. · Insert the mains plug into a wall socket (220-240V / 50/60Hz). · Ensure the power cord is fully inserted in the TV mains socket and the wall socket. Warning! If the TV is mounted on a swivel base or swivel arm, ensure no strain is placed on the power cord when the TV is swivelled. Strain on the power cord can loosen connections. This may cause arching and result in fire. · To switch on the TV set, press the POWER button. A green indicator comes on and the screen lights up. · If the TV set remains in standby mode (red indicator), press the PROGRAM ­ / + key on the keyboard or the P ­ / + key on the remote control. ­ 3 Television keys and connectors 11 4 ­ 26" / 32" R 3 AUDIO IN L VIDEO IN S-VIDEO 2 6 5 L R EXT3/SVHS3 7 EXT 4 AUDIO R IN L Pr Pb Y 1 . ­ HDMI EXT 2 /SVHS2 EXT 1 DVI (AUDIO IN) AC in ~ 8 37" 2 9 10 11 R AUDIO IN L 3 VIDEO IN S-VIDEO 42" 4 EXT3/SVHS3 1 6 L R AUDIO R IN 7 EXT 4 L Pr Pb Y 5 HDMI EXT 2 /SVHS2 EXT 1 DVI (AUDIO IN) AC in ~ 8 9 10 NOTE : EXT3/SVHS3 is only available for certain models. 4 Television keys and connectors 1 2 3 POWER . : to switch the TV on and off. VOLUME ­/+: to adjust sound level. MENU : to access or close menus. The PROGRAM /CHANNEL ­/+ keys can be used to select a menu item and the VOLUME ­/+ keys to enter into the selected menu item and make adjustments. 4 PROGRAM / CHANNEL ­/+ : to select programmes. POWER socket : Insert the mains plug into a wall socket. DVI Audio Input : for connecting a HD (high definition) equipment or computer with DVI output. Component Video inputs / Audio Inputs (EXT4) : to connect to equipment like DVD, Set-Top box which have the same sockets. Connect the audio inputs of the TV to the outputs of the device together with the Component Video Inputs. 8 HDMI socket : to connect to set-top box, DVD player/recorder, High Definition equipment or Personal Computer. 9 EXT1 and EXT2/SVHS2 sockets : connect to equipment like DVD player/recorder, VCR, Decorder which have scart connections. Important : In order to connect your decoder, please use EXT1 scart only. TV Aerial socket : Insert the aerial plug into the 75 : socket. Side connections EXT3/SVHS3: for connecting to devices like camera or camcorder. Also allows you to connect your headphone for your personal listening pleasure. Note : EXT3/SVHS3 is only available for certain models. 10 5 11 6 7 5 Remote Control keys 7 Active Control 8 MENU (See page 14). 1 2 3 4 5 6 7 8 9 10 To call up or exit the TV menus. These 4 keys are used for selection and adjustment of menu items. 9 Cursors AUX 15 16 17 18 19 20 10 OK Confirms selection. 11 Volume ( ­ VOL + ) To adjust the sound level. 21 11 22 12 13 12 Smart Picture /Sound Used to access a series of predefined picture and sound settings (see page 14). 13 / Numerical keys For direct access to programmes. For a 2 digit programme number, the 2nd digit must be entered before the dash disappears. 14 Screen information To display/remove the programme number, the sound mode, the remaining time of the sleeptimer and the *signal strength indicator. 15 Mode Select between TV, DVD and AUX mode (see "Remote Control - Other functions" on page 7). 16 Programme List To display / clear the list of programmes. Use the Î ï keys to select a programme and the Æ key to display it. 17 Picture-in-Picture To display a PIP window on the TV screen (see page 12 on how to use the PIP feature). 18 Sound mode Used to force programmes in Stereo and Nicam Stereo to Mono or, for bilingual programmes, to choose between Dualå or Dual». The Mono indication is red when in forced position. (see page 13). 19 Screen Format 20 DVD / AUX (see page 7). 21 Mute Press to mute or restore sound. 22 Selecting TV programmes (P ­ / +) To select the next or previous programme. The number and the sound mode are displayed for a few seconds. For some TV programmes, the title of the programme appears at the bottom of the screen. 14 23 1 Standby To set the TV to standby mode. To switch the , to , TV set on again, press P ­ / + or AV key. 2 No function. 3 DVD / AUX (see page 7). 4 Surround Sound To activate / deactivate the surround sound effect. In stereo, this gives the impression that the speakers are further apart. For models equipped with Virtual Dolby Surround, you can experience Dolby Surround Pro Logic sound effects. 5 Telextext keys (see page 15). 6 AV To display Source List to select TV or peripheral equipment connected to EXT 1, EXT 2/SVHS2, EXT 3/SVHS3, EXT 4 or HDMI. Note : EXT3/SVHS3 is only available for certain models. 23 Previous/Present programme To alternate between the last viewed and present programme. * The signal strength indicator shows the signal strength of the transmission of the programme you are watching. 6 Remote Control keys (Other functions) The remote control also allows you to control the main functions of some Philips DVD models key to select the required mode: DVD or AUX. Press the The remote control indicator lights up to display the selected mode. It switches off automatically after 20 seconds if left idle. The mode automatically returns to TV mode. The following buttons are operational, depending on the equipment: standby fast rewind stop play fast forward record Note : Functions not available to Philips DVD-R device. to navigation and adjustments, confirms selection digit keys pause display and exit menu programme selection Quick Installation When you switch on the TV set for the first time, a menu is displayed on screen. This menu prompts you to select the country and language for the menus. Plug'n'Play The search starts automatically. All the available TV programmes will be stored. This operation takes a few minutes. The display shows the progress of the search and the number of programmes found. Important : To exit or interrupt the search before it is completed, press the key. If you interrupt search during auto store, not all channels will be stored. For all channels to be stored, you need to do a complete auto store search again. Note ATS (Automatic Tuning System) feature If the transmitter or cable network sends the automatic sort signal, the programmes will be numbered correctly. In this case, the installation is complete. If this is not the case, you need to use the Sort menu to number the programmes correctly. ACI (Automatic Channel Installation) feature If a cable system or a TV channel which broadcasts ACI is detected, a programme list appears. Without ACI broadcast, the channels are numbered according to your language and country selection. You can use the Sort menu to renumber them. Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this case, indicate your choice using the Î ï keys and confirm with Æ key. Country GB Language English Note If the above menu is not displayed, proceed to do the installation of channels by the Auto Store method (see page 8). If above menu is displayed, proceed to do the following steps. & Use the Î ï keys on the remote control to select your country. If your country does not appear in the list, select ". . . " . Refer to the "Reference table of Countries available for selection" on page 24. é Use the Æ key to move to the Language " mode and select your language by the Î ï keys. Use the Æ key to start search. 7 Programme Sort key. The TV Menu is 1 Press the displayed on the screen. TV Menu Picture Sound Features Install 3 4 Use the ï key to select Sort and the key to enter sort mode. Æ/ Select the programme number you want to move using the Î ï keys and the Æ / key to enter sorting mode (The arrow cursor now points to the left). Install Language Country Auto Store Manual Store Sort Name Æ Æ Æ Æ Æ Æ · · · · · · 0 1 2 3 4 5 2 Use the ï key, select the Install menu key to enter the and the Æ / Install menu. 5 Use the Î ï keys to select the new programme number and confirm with the key. (The arrow points to the Í/ right and sorting is completed). 6 Repeat steps 4 and 5 for each programme number you wish to re-number. 7 To return to previous menu, press the key. key. 8 To exit the menu, press the Auto Store 1 Press the key. 4 2 Using the ï key, select Install and the Æ/ key to enter the Install menu (Language is highlighted). TV Menu Picture Sound Features Install Select Country with the ï key and use the Í Æ keys to select the country of your choice. Install Language Country Auto Store Manual Store Sort Name Æ Æ Search Æ Æ Æ 5 Using the ï key, select Auto Store and the Æ / key to start automatic searching of the channels. All the available TV programmes will be stored. This operation takes a few minutes. The display shows the progress of the search and the number of programmes found. 6 After the search is completed, press the key to exit menu. Important : To exit or interrupt the search before it is completed, press the key. If you interrupt search during auto store, not all channels will be stored. For all channels to be stored, you need to do a complete auto store search again. 3 Select your desired menu *Language w ...