|
Need help using a product?
|
|
|
|
User manual PHILIPS HX1520
Diplodocs help download the user guide PHILIPS HX1520 .
This product, although classified under the brand PHILIPS, may have been manufactured by GEMINI INDUSTRIES, NORELCO, RADIOLA after mergers, acquisitions, or a change in name.
Preview of the first 3 pages of manual
You either have JavaScript turned off or an old version of Adobe Flash Player Get the latest Flash Player.
Manual abstract: user guide PHILIPS HX1520
Detailed instructions for use are in the User's Guide. INDEX ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ITALIANO ESPAÑOL PORTUGUÊS TÜRKÇE 4 11 18 25 32 39 46 53
3
HX 1525/20
4
ENGLISH
Important
Be sure to check if the wall socket to which you connect the charging unit is live. In some bathroom cabinets, the electricity supply to the built-in socket may be interrupted as soon as the light is switched off. Charge the appliance for at least 16 hours before you use it for the first time. The mains cord of the charging unit cannot be replaced. If the cord is damaged, the unit should be discarded. Please apply to your Philips dealer or to the Philips organisation in your country (refer to the World Wide Guarantee leaflet). The built-in battery contains substances that can be harmful to the environment. If you discard the appliance in due course, remove the built-in battery and hand it in at an official collection point or dispose of it in accordance with the regulations. See section "Environmental aspects". If your appliance is marked with y the following text applies: To protect the environment, this appliance has been equipped with a nickel-hydride (NiMH) battery which contains less than 0.01% cadmium. Still we advise you to make sure sure that, when you discard the appliance, you keep the battery separate from normal household refuse and dispose of it at an officialy assigned collection point. Please refer to section "Environmental aspects". If your appliance is marked with t the following text applies: The built-in rechargeable (NiCd) battery contains substances which may pollute the environment. When you discard your appliance in due course, please ensure that the battery is kept separate
ENGLISH
5
from normal household refuse and disposed of at an officially assigned collection point. Please refer to section "Environmental aspects".
Environmental aspects
2
If you discard the appliance in due course, remove the battery and dispose of it in an environmentally safe way.
1
NB:You can also hand the appliance in at a Philips Service Centre, which will dispose of the battery for you. Before you remove the battery, it must be completely empty. Let the appliance run until is stops before removing the battery. NB: Only unscrew the bottom of the appliance if you want to remove the battery. After the bottom has been unscrewed, the appliance may not be watertight anymore. Therefore the guarantee will become invalid if the bottom of the appliance has been unscrewed. If undamaged, the sticker on the bottom of the appliance will prove that the appliance has not been opened.
6
ENGLISH
Directions for use Mounting the appliance on the wall
C
21 mm
1 Mount the charging unit to the wall. Do not allow the charging unit to come into contact with water.The toothbrush, however, is watertight and can therefore be used safely anywhere.
2 1
Charging
C
16 hrs
Leave the appliance to charge for at least 16 hours before you use it for the first time. The toothbrush can be put back in the charging unit after use. Only type HX 1525: If the battery in the toothbrush is being charged, the pilot light is green. Tip: The toothbrush can be left to charge continuously.When you start using the appliance, we recommend you to use it until the battery is empty and to recharge it completely. Do so three times in a row.You can do this by using the appliance in the normal way without recharging it between brushing sessions until the motor almost stops running.To extend the lifetime of the battery, repeat this procedure every six months.
1
ENGLISH
7
How to use
C
1 2
1
Mount the brush head onto the toothbrush by inserting it into the bayonet catch and turning it.This will make it impossible for the brush head to become detached due to vibration. Place the brush in your mouth.
C
2
C
3
Press the on/off button to switch the toothbrush on.
Brushing
C
Place the brush against the tooth at an angle, in such a way that it covers the surface of the tooth as well as the gum line. Hold the brush in that position for a few seconds and then move on to the next tooth. The round brush head removes plaque from the teeth and beneath the gum margin. The individual moving Active Tip cleans between the teeth. 2 The brush will do the work for you.All you have to do is guide the brush carefully along the teeth and molars.
1
C
8
ENGLISH
Make sure that you reach all surfaces of the teeth (inside, outside and chewing surface) as well as the gums properly. A fixed brushing pattern will prevent you from skipping certain areas. See also the brushing instructions coming with the appliance and the section `taking optimal care of your teeth'.
Safe brushing
C
1
The Controlled Pressure system will keep a check on the pressure you exert on the brush.
C
If you press the brush too hard against your gums, you will feel and hear a click when the brush head flexes backwards.As soon as you reduce the pressure, the brush will return to its normal position. This will probably happen regularly when you first start using the brush, but after some time you will have discovered the optimal brushing pressure, and the brush will flex backwards less often. Tip: If plaque is removed properly, the gums will have a pink colour and firmly surround the teeth. Healthy gums do not bleed when you eat or brush your teeth. If, nevertheless, your gums bleed slightly the first few times you use the brush, this bleeding will generally stop after a few days. If it does not, consult your dentist or dental hygienist.
2
ENGLISH
9
Minimum brushing time: 2 minutes
In general, 2 minutes will be enough to clean your teeth properly. Naturally, you can also brush longer than 2 minutes.
After brushing
C
1
Let the toothbrush run while you rinse the brush head under the tap. Use lukewarm water (max. 60°C).
C
2
Also rinse the inside of the brush head.
C
CLICK
3
Switch the toothbrush on again to rinse toothpaste residues from the drive shaft.
C
4 5
Store the brush head by placing it onto the charging unit.
You can clean the charging unit with a moist cloth. First unplug the charging unit!
10
ENGLISH
Brush head replacement
C
Replace the brush head every three months for the best brushing results. The brush head should also be replaced when the bristles start to bend outwards. New brush heads are available from the shop in which you have purchased your Philips Jordan toothbrush. Tip: Worn bristles will move plaque around rather than remove it.They may also damage the gums. It is therefore important that you replace the brush head every three months.
1
FRANÇAIS
11
Important
Assurez vous que la prise de courant murale sur laquelle est branché l'appareil reste bien sous tension même lorsque la lumière de la salle de bain est éteinte. Charger l'appareil pendant au moins 16 heures avant de l'utiliser pour la première fois. Le cordon d'alimentation du chargeur ne peut pas être remplacé. Si le cordon est endommagé, le chargeur doit être mis au rebut.Veuillez consulter votre revendeur Philips ou le réseau Philips dans votre pays (voir le dépliant de garantie mondiale). L'accu incorporé contient certaines substances qui peuvent nuire à l'environnement. Si vous mettez l'appareil au rebut, enlevez l'accu incorporé et remettez-le à un point de collecte officiel ou éliminez-le en conformité avec la réglementation. Voir chapitre "Aspects concernant l'environnement". Si votre appareil porte la marque y , le texte suivant est d'application: Afin de protéger l'environnement, cet appareil est équipé d'un accu à l'hydrure de nickel (NiMH), qui contient moins de 0,01% de cadmium. Nous recommandons cependant, lors la mise au rebut de l'appareil, de séparer l'accu des déchets ménagers et de vous en débarrasser en un point de collecte officiel.Veuillez consulter le chapitre "Aspects concernant l'environnement". Si votre appareil porte la marque t le texte suivant est d'application : L'accu incorporé contient certaines substances qui peuvent polluer l'environnement. Lorsque vous mettez l'appareil au rebut en temps voulu, veillez à séparer l'accu des déchets ménagers et à vous en débarrasser en un point de
12
FRANÇAIS
collecte officiel.Veuillez consulter le chapitre "Aspects concernant l'environnement".
Aspects concernant l'environnement
2
Lorsque vous mettez l'appareil au rebut en temps voulu, enlevez l'accu incorporé et éliminez-le de manière sauvegardant l'environnement.
1
NB:Vous pouvez également remettre l'appareil à un Centre de service après vente Philips, qui éliminera l'accu pour vous. Avant d'enlever l'accu, il doit être complètement déchargé. Laissez tourner l'appareil jusqu'à l'arrêt de l'appareil avant d'enlever l'accu. NB: Dévissez uniquement le fond de l'appareil lorsque vous désirez enlever l'accu. Lorsque le fond de l'appareil a été dévissé, l'appareil peut ne plus être étanche à l'eau. Dès lors, la garantie deviendra caduque si l'appareil a été dévissé. Lorsqu'il est intact, l'autocollant sur le fond de l'appareil est la preuve que l'appareil n'a pas été ouvert.
FRANÇAIS
13
Instructions d'utilisation Montage de l'appareil sur le mur
C
21 mm
1 Fixer le chargeur au mur. Ne laissez pas le chargeur entrer en contact avec l'eau. La brosse à dents, cependant, est étanche à l'eau et peut dès lors être utilisée partout en toute sécurité.
2 1
Chargement
C
16 hrs
Laissez l'appareil charger pendant au moins 16 heures avant de l'utiliser pour la première fois. La brosse à dents peut être remise dans le chargeur après usage. Uniquement modèle HX 1525 : lorsque l'accu de la brosse à dents est en cours de chargement, la lampe témoin est verte. Conseil : L'accumulateur peut être laissé en charge continuellement. Lors de la première utilisation de l'appareil, nous vous recommandons d'utiliser votre brosse à dents jusqu'à ce que l'accumulateur soit complètement déchargé. Procédez de cette façon trois fois de suite.Vous pourrez le faire tout en utilisant l'appareil normalement sans le recharger entre les périodes de brossage jusqu'à ce que le moteur ait pratiquement cessé de fonctionner. Pour prolonger la vie de votre accumulateur répétez cette opération tous les six mois.
1
14
FRANÇAIS
Comment l'utiliser
C
1 2
1
Placez la tête de brosse sur la brosse à dents en l'insérant dans le raccord à baïonnette et en la faisant tourner. De ce fait, il sera impossible pour la tête de brosse de se détacher sous l'effet des vibrations. Placez la brosse dans la bouche.
C
2
C
3
Appuyez sur le bouton marche/arrêt pour enclencher la brosse à dents.
Brossage
C
Placez la brosse contre la dent avec un certain angle, de telle manière qu'elle couvre la surface de la dent ainsi que la ligne de la gencive. Maintenez la brosse dans cette position pendant quelques secondes et déplacez-la ensuite vers la dent suivante. La tête de brosse ronde enlève la plaque dentaire des dents et en dessous de la ligne de la gencive. L'extrémité Active Tip à mouvement individuel nettoie entre les dents.
1
FRANÇAIS
15
C
2
La brosse fera le travail pour vous.Tout ce que vous devez faire est de guider la brosse doucement le long des dents et des molaires.
Veillez à atteindre convenablement toutes les surfaces des dents (intérieures, extérieures et surfaces de mastication) ainsi que la gencive. Suivre un ordre fixe de brossage vous évitera de sauter certaines zones. Voir également les instructions de brossage accompagnant l'appareil et le chapitre "Soins optimaux des dents".
Brossage en sécurité
C
1
Le système de pression contrôlée garde le contrôle de la pression que vous exercez avec la brosse.
C
Si vous appuyez la brosse trop fortement sur la gencive, vous sentirez et entendrez un clic lorsque la tête de la brosse bascule en arrière. Dès que vous réduisez la pression, la brosse revient en position normale. Ceci se produira probablement régulièrement la première fois que vous utilisez la brosse, mais, après un certain temps, vous aurez trouvé la pression de brossage optimale et la brosse basculera moins souvent en arrière.
2
16
FRANÇAIS
Conseil : si la plaque dentaire est correctement éliminée, les gencives auront une couleur rose et entoureront fermement les dents. Les gencives saines ne saignent pas lorsqu'on mange ou qu'on se brosse les dents. Si, néanmoins, vos gencives saignent légèrement les premières fois que vous utilisez la brosse, ce saignement cessera généralement après quelques jours. Si ce n'est pas le cas, consultez votre dentiste ou votre hygiéniste dentaire.
Temps minimum de brossage : 2 minutes
En général, 2 minutes suffisent pour vous nettoyer correctement les dents. Vous pouvez naturellement vous brosser les dents plus longtemps que 2 minutes.
Après le brossage
C
1
Laissez la brosse tourner pendant que vous rincez la tête de la brosse sous le robinet. Utilisez de l'eau tièd ...
|