Philips multimedia projector bCool SV1 English User guide Index 1. Introduction 4 Packaging contents 4 Optional accessories 5 Service accessories 5 6-9 Controls 6-7 Remote control 8 Connections 9 10-12 Positioning the projector and screen 10 Turning on the projector 10 Adjusting the focus and size of the image 11 Adjusting the vertical and horizontal angle of the projector 11 To raise the projector 11 To lower the projector 11 Keystone correction 11 Moving/transporting the projector 11 Preparation 11 Moving/transporting the projector 11 Inserting the batteries in the remote control 12 13-16 General information 13 Computer input 13 USB connection (Universal Serial Bus) 13 Video input 13 Connecting to a computer 14 Connecting to video equipment 15-16 CVBS (Video) 15 S-VHS (S-Video) 15 Scart connection 15 Component/HDTV (YPbPr/ YCbCr) 16 > 2. Functional overview 3. Set up 4. Installation Philips Multimedia Projector 2 English User guide bCool SV1 Index 5. Operation 17-30 Preparation 17 General 17 Messages 17 General explanation 17 Feedback messages 17 Some examples 17 On Screen Display Menu 18-23 Menu tree 18-19 General explanation 20 Computer adjustments 21 Picture adjustments 21 Video series adjustments 21 Picture adjustments 21 General adjustments 22-23 'Features' adjustments 22 Setup adjustments 23 Theft deterrence - SecurityMax 24-30 What to do if... 24 Introduction 24 Setting up SecurityMax 25 Setting a Security code 25 Changing your Security code 26 Entering your personal start-up text 27 Setting the Shutdown timer 27 Unlocking the projector after shutdown 28 Update the shutdown timer 28 Disable the shutdown timer 29 Removing SecurityMax protection 30 Exit SecurityMax 30 31-33 Cleaning 31 Cleaning the cabinet 31 Cleaning the lens 31 Lamp 32 Lamp replacement 32 Resetting the lamplife time 33 34-36 < 6. Maintenance 7.Troubleshooting End of life directives Philips is paying a lot of attention to producing environmentally-friendly in green focal areas. Your new product contains materials which can be recycled and reused. At the end of its life specialised companies can dismantle the discarded product to concentrate the reusable materials and to minimise the amount of materials to be disposed of. Please ensure you dispose of your old product according to local regulations. Philips Multimedia Projector 3 English User guide bCool SV1 1. Introduction Congratulations on your purchase.You have selected one of the most sophisticated and reliable products on the market today. We are sure that when used properly, it will bring you years of enjoyment.You will want to keep this manual available, as it is a convenient source of information about your projector. For your own protection and prolonged operation of your projector, please read the enclosed Safety Sheet. Make sure the following statement is on the Safety Sheet: > Packaging contents Please confirm that the following items are packed in the projector box.They are provided to help you use or set up your projector. Standby On Left LEFT Mouse VOolume RIight RIGHT Menu OK Mute A/V Mute Source D-Freeze D-Zoom Projector - Lens cap Remote control + batteries Two AAA batteries Mains Lead S-Video cable Composite Video cable VGA cable USB cable Softbag Cable pouch Quick set up Card and Safety Sheet Cd-rom (with Projection Assistant, Warranty card, SecurityMax, User Guide, Spec. sheet and more.) WARNING When moving this projector, you must prevent small metallic objects from entering inside of the projector.This projector is not intended to be routinely carried. This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org Philips Multimedia Projector 4 English User guide bCool SV1 1. Introduction Optional accessories The · · · The · · · following accessories are available from your dealer: LCA3126/00 - 180W replacement lamp - 8670 931 26009 LCA2218/00 - Ceiling mount - 8670 922 18009 LCA5311/00 - RCA/VGA component video adaptor cable - < 8670 953 11009 Service accessories following accessories are available from our Service Organization: Laser pointer remote Control - 3139 228 62631 Compact remote control - 3139 228 62641 User Guide (Cd- rom) - 3122 435 96321 Philips Multimedia Projector 5 English User guide bCool SV1 2. Functional overview 1 Menu Controls > 2 OK 3 8 ^ Source Auto Image 4 5 % Lamp Temp. 0 9 76 ! $ @# Menu 1 OK 2 Cursor Control 3 To activate and deactivate the menu. To confirm actions in the menu when the menu is on screen. When the menu is active, use the Cursor to navigate through the OSD menu.The Cursor works with up/down and left/right button operation. To automatically adjust frequency, tracking, horizontal and vertical position. With most signal sources, Auto Image provides the best results. To turn the projector on or off. The Standby indicator (text on button/ring around button): In Power on mode: ­ the light blinks green when the projector is warming up; ­ light is green when the projector is on.; In Power off mode: ­ light is red when the projector is off. (Standby); ­ the light blinks red when the projector is cooling down. Light turns red when there is a temperature problem. ­ ­ Fast blinks red (0.5 sec On, 0.5 sec Off) when lamp start has failed. Fast blinks red (1 sec On, 1 sec Off) in case of fan error. Auto Image 4 Standby/ Standby indicator 5 Temperature indicator 6 Lamp indicator 7 Source 8 To select the current projection source (Computer,YPbPr,YCbCr, RGBS, S-Video or Video).The button toggles between the six signals. To adjust the size of the image. To adjust the focus of the image. Zoom Ring 9 Focus Ring 0 Philips Multimedia Projector 6 English User guide bCool SV1 2. Functional overview 1 Menu Controls < 2 OK 3 8 ^ Source Auto Image 4 5 % Lamp Temp. 0 9 76 ! $ @# Mains inlet socket ! Elevator button @ Elevator foot # Lamp compartment $ Horizontal adjuster % Keystone correction keys ^ To connect the projector to the mains. To release the elevator foot. To adjust the vertical angle of the projector. To adjust a possible oblique displayed picture. To correct picture distortion of the vertical keystone type by internal scaling. Philips Multimedia Projector 7 English User guide bCool SV1 2. Functional overview Remote control < 1 2 3 4 Standby On Left MOUSE VOLUME Right MENU OK ! 0 5 6 7 Mute A/V Mute SOURCE D-FREEZE D-ZOOM 9 8 Stand by On 1 Mouse Left/Right 2 ­ Volume + 3 Menu 4 Mute 5 Source 6 To turn the projector on or off in the Power/Standby mode. Function as the Left and Right mouse buttons of your pc when USB connection has been made. To adjust the volume.This model does not support this function. To activate and de-activate the menu. To mute the sound of the projector.This model does not support this function. To select the current projection source (Computer,YPbPr,YCbCr, RGBS, S-Video or Video). The button toggles between the six signals. To capture a (moving) picture.The button toggles between the Freeze mode and the display situation. To magnify the size of the projected image. Use Cursor control to select the zoom center and x1 x4 x9 x 16 press D(igital)-Zoom to select the required zoom factor: The button toggles between the various zoom factors. To mute the sound of the projector and the picture.This model only supports Video Mute. To manipulate the mouse cursor on the connected computer as long as the menu is not active. When the menu is active use the Cursor to navigate through the OSD menu.The Cursor works with up/down and left/right button operation. The Cursor Control can only function as a mouse cursor when projector and computer are connected via the USB connectors. Windows 98®, Windows ME®, Windows 2000® or Windows XP® should be installed on the computer when you make the USB connection. To confirm actions in the menu when the menu is on screen. D(igital)-Freeze 7 D(igital)-Zoom 8 A(udio)/V(ideo) Mute 9 Cursor Control 0 Note OK ! Note Philips Multimedia Projector The maximum range of the remote control is approximately 7 m (± 25 feet). 8 English User guide bCool SV1 2. Functional overview 1 234 Connections < 56 Data in Data in USB USB S-Video S-Video Video Video Data in 1 Data source connections ­ Input socket to connect to the Data out terminal of a computer. ­ Input socket to connect to DVD- and HDTV-video equipment This socket can be connected to the following output sockets:YCbCr,YPbPr, RGBS (Composite sync), RGBHV. In-/Output socket to connect a PC or Apple Macintosh computer equipped with a USB downlink connection. When USB connection is used, the mouse cursor on the connected computer can be controlled through the projector remote control. Make sure Windows 98®, Windows ME®, Windows 2000® or Windows XP® is installed on the computer. Video source connections Input socket to connect to the S-Video out socket of a S-VHS video recorder, a VCR, Laser Disc player, DVD player, video camera or TV with AV output socket. This socket can be connected to a S-Video/S-VHS (Y/C) output socket. Input socket to connect to the Video out socket of a video recorder, Laser Disc player, video camera, DVD player, or TV with AV output socket. This socket can be connected to CVBS output sockets. Other connections To receive the signals from the remote control. To insert an optional locking device (Kensington lock). USB 2 S-Video 3 Video 4 IR sensor 5 Lock slit 6 Philips Multimedia Projector 9 English User guide bCool SV1 3. Set up Positioning the projector and screen Front projection SCREEN SCREEN SCREEN > Ceiling front projection SCREEN Rear projection Ceiling rear projection · · · · · · · Place the projector on a stable, level surface out of direct sunlight and away from sources of excessive dust, dirt, heat, water, moisture, vibration and strong magnetic fields. Allow sufficient cooling of the product by keeping all air inlets and outlets clear from obstructions. Position the projector in such way that the viewers cannot watch into the projector light beam. Choose a screen size suitable for the number of viewers and the size of the room. Picture quality is best when you sit directly in front of the projector screen. The projector can be used for front projection, rear projection and ceiling projection applications. As default factory setting, the projector has been set up for front projection. You can change to rear or ceiling projection via the `Mirror' function in the `Setup' menu. For more information, check the Projection Assistance application on the Cd-rom. Insert the mains lead into the projector's Mains inlet socket and connect it to the wall socket. The Standby indicator light is red indicating the projector is now in the Standby mode. Remove the lens cap. Press the Standby button on the projector or remote control to turn on the projector. The Standby indicator light blinks green indicating the projector is now warming up. Turning on the projector Menu OK Source Auto Image 1 ­ 2 3 ­ Lamp Temp. ­ When the projection lamp is on, the Standby indicator light turns green after the start-up screen has appeared for several seconds. 4 ­ ­ Press the Standby button twice to switch the projector back into the Standby mode. The Standby Warning screen will appear for 20 seconds. The projector will now go into Standby mode. 5 To switch off the mains supply completely, disconnect the mains lead. Save energy! Please put the projector in the Standby position if you are not going to use the projector for more than 15 minutes. When no signal inputs are detected for 15 minutes, the projector automatically returns to Standby (`Auto Standby'). Before disconnecting the mains lead, make sure that the cooling fan has stopped (about 2 minutes after the projector returned to Standby). Notes ­ ­ ­ Philips Multimedia Projector 10 English User guide bCool SV1 3. Set up Adjusting the focus and size of the image Zoom ring Focus ring > · · Use the Zoom ring to adjust the size of the image. Use the Focus ring to adjust the focus of the image. Adjusting the vertical and horizontal angle of the projector To raise the projector 1 Press the Elevator button (A). 2 Raise the projector to the desired display angle, then release the button to lock the elevator foot (B) into position. 3 Use the horizontal adjuster (C) to fine-tune the display angle. To lower the projector 1 Press the Elevator button (A). 2 Lower the projector to the desired display angle, then release the button to lock the elevator foot (B) into position. 3 Use the horizontal adjuster (C) to fine-tune the display angle. A B C Keystone correction If the projector and screen are not properly placed, the picture will be distorted, producin ...