|
Need help using a product?
|
|
|
|
User manual PHILIPS MCM7
Diplodocs help download the user guide PHILIPS MCM7 .
This product, although classified under the brand PHILIPS, may have been manufactured by GEMINI INDUSTRIES, NORELCO, RADIOLA after mergers, acquisitions, or a change in name.
Manual abstract: user guide PHILIPS MCM7
Detailed instructions for use are in the User's Guide. Micro Hi-Fi System
MCM7 · MCM8
AUDIO
MCM7
MCM8
1
Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:
Italia
DICHIARAZIONE DI CONFORMITA'
Si dichiara che l'apparecchio MCM7, MCM8, Philips risponde alle prescrizioni dell'art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands
1 2 3
Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.
Norge
Typeskilt finnes på apparatens underside. Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten. For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).
¶ As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:
 Connect the blue wire to the terminal marked N or coloured black.  Connect the brown wire to the terminal marked L or coloured red.  Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow). Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.
CAUTION
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
VAROITUS
Muiden kuin tässä esitettyjen toimintojen säädön tai asetusten muutto saattaa altistaa vaaralliselle säteilylle tai muille vaarallisille toiminnoille.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.
2
3
DK
Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet. Den indbyggede netdel er derfor tilsluttet til lysnettet så længe netstikket sidder i stikkontakten.
SF
Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Huom.Toiminnanvalitsin on kytketty toisiopuolelle, eikä se kytke laitetta irti sähköverkosta. Sisäänrakennettu verkkoosa on kytkettynä sähköverkkoon aina silloin, kun pistoke on pistorasiassa.
S
Klass 1 laseraparat Varning! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1. Observera! Stömbrytaren är sekundärt kopplad och bryter inte strömmen från nätet. Den inbyggda nätdelen är därför ansluten till elnätet så länge stickproppen sitter i vägguttaget.
Energy Star
As an ENERGY STARR Partner, Philips has determined that this product meets the ENERGY STARR guidelines for energy efficiency.
4
Index
English ------------------------------------------------ 6
Français -------------------------------------------- 26
Español --------------------------------------------- 46
Deutsch --------------------------------------------- 66
Nederlands ---------------------------------------- 86
Italiano -------------------------------------------- 106
Svenska ------------------------------------------- 126
Dansk --------------------------------------------- 146
Suomi --------------------------------------------- 166
Português ---------------------------------------- 186
----------------------------------------- 206
5
Português
Suomi
Dansk
Svenska
Italiano
Nederlands
Deutsch
Español
Français
English
Contents
English
General Information
Supplied accessories ............................................ 7 Environmental information ................................ 7 Care and safety information .............................. 7
Tuner Operations
Tuning to radio stations .................................... 17 Presetting radio stations ................................... 17 Using the Plug and Play .................................. 17 Automatic presetting ..................................... 18 Manual presetting ............................................ 18 Selecting a preset radio station ....................... 18 Deleting a preset radio station .................... 18 RDS ....................................................................... 18 Scrolling through RDS information ............. 18 Setting the RDS clock .................................... 18 NEWS ................................................................... 19 Switching on NEWS function ....................... 19
Functional Overview
Main unit and remote control ....................... 8Â9 Control buttons available on the remote only ........................................................ 9
Connections
Step 1: Connecting FM/AM antennas ............ 10 Step 2: Connecting the speakers .................... 11 Step 3: Connecting the AC power cord ........ 11 Step 4: Inserting batteries into the remote control .................................................................. 11 Using the remote control to operate the system ........................................................ 11
Tape Operations/Recording
Playing a tape ....................................................... 20 General information on recording ................. 20 Preparation for recording ................................ 21 One touch recording ......................................... 21 CD Synchronised start recording .................. 21
Basic Operations
Switching on/off ................................................. 12 Switching to an active mode ......................... 12 Switching to Eco Power standby mode ..... 12 Switching to standby mode (view clock) ... 12 Demonstration mode ........................................ 12 Setting the clock ................................................. 12 Dimming system's display screen .................... 13 Volume control ................................................... 13 Sound control ..................................................... 13 Incredible Surround ........................................ 13 Bass/Treble ........................................................ 13 Natural (Flat) sound ....................................... 13
Timer Operations
Timer setting ....................................................... 22 Activating / Deactivating the timer ............... 22 Checking the timer setting ........................... 22 Temporarily deactivating the wake up timer .................................................................. 23 Setting the Sleep Timer ..................................... 23
Other Connection
Listening to an external source ...................... 23
Specifications ........................................... 24 Disc Operations
Playable discs ....................................................... 14 Loading disc ......................................................... 14 Basic playback controls ..................................... 14 Playing an MP3 disc ............................................ 15 Repeat and Shuffle .............................................. 15 Repeat play ....................................................... 15 Random play ..................................................... 15 Programming the disc tracks ........................... 16 Checking the programme ............................. 16 Clearing the programme ............................... 16
Troubleshooting .................................... 25
6
General Information
This product complies with the radio interference requirements of the European Community. Refer to the type plate on the rear or bottom of the system for identification and supply ratings. For users in the U.K.: please follow the instructions on page 2.
Care and safety information
Avoid high temperatures, moisture, water and dust
 Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep the disc tray closed to avoid dust on the lens.
Supplied accessories
Avoid condensation problem
 The lens may cloud over when the system is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the system in the warm environment until the moisture evaporates.
CD
TUNER
TAPE
AUX
REPEAT
PROGRAM
SHUFFLE
TAPE A/R
DISPLAY
Do not block the vents
CLOCK TIMER TIMER ON/OFF NATURAL
REC
DIM
SLEEP
SNOOZE
 In a cabinet, allows about 10cm (4 inches) of free space all around the system for adequate ventilation.
BASS
TREBLE
INC. SURR
MUTE
Care of disc
 To clean a CD, wipe it in a straight line from the centre towards the edge using a soft, lint-free cloth. A cleaning agent may damage the disc!  Write only on the printed side of a CDR(W) and only with a soft felt-tipped pen.  Handle the disc by its edge, do not touch the surface.
   Â
Remote control and two AA batteries. AM loop antenna FM wire antenna AC power cord
Care of the cabinet
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
 Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Finding a suitable location
 Place the system on a flat, hard, and stable surface.
Built-in safety circuit
 Under extreme conditions, this system may switch to standby mode automatically. If this happens, let the system cool down before reusing it.
Cleaning the Heads and the Tape Paths
 To ensure good recording and playback quality, clean the heads, the capstan(s), and pressure roller(s) after every 50 hours of tape operation.  Use a cotton swab slightly moistened with cleaning fluid or alcohol.  You also can clean the heads by playing a cleaning tape once.
7
English
Functional Overview
English
        Â
1 2 3 4 5 6 7 8 9 0 ! @ #
IR
STANDBY-ON ECO POWER
CLOCK
RDS/ NEWS
OPEN/ CLOSE
MP3-CD / CD-R / CD-RW COMPATIBLE
* & ^
6 ( ) % ¡
>
CD TUNER TAPE AUX REPEAT PROGRAM SHUFFLE
MICRO
SYSTEM
TAPE A/R
DISPLAY
< ¤ / 8
CD
TUNER
TAPE
AUX MASTER VOLUME
PLAY/PAUSE DEMO STOP
REC
TREBLE·
7
TUNING
%
·BASS
ALBUM / TITLE
$
OPEN/ CLOSE
TM ^ £ ! $
CLOCK
TIMER TIMER ON/OFF NATURAL
REC
DIM
SLEEP
SNOOZE
BASS
TREBLE
º ª · §
INC. SURR
MUTE
AUTO REVERSE
LOGIC DECK
Main unit and remote control 1 STANDBY ON B
Switches to Eco Power standby mode or turns on the system. *Switches to standby mode. Lights up when the system is in Eco Power standby mode.
7 DEMO STOP Ç
        Exits an operation. CD: stops playback or clears a programme. TUNER: *erases a preset radio station. TAPE: stops playback or recording. (only on the main unit) *Turns on/ off the demonstration mode. CD: starts/pauses playback. TAPE: starts playback or selects other side of the tape during playback. CLOCK: toggles between hour and minutes setting. (only on the main unit) TUNER: *enters Plug & Play mode and/or starts preset radio station installation. Plug in the headphones jack. The speakers output will be cancelled.
2 ECO POWER indicator
8 ÉÅ
3 Disc tray 4 Display screen 5 iR
Point the remote control towards this sensor. Selects the relevant active mode. CD: switches to CD mode. TUNER: toggles between FM and MW band. TAPE: switches to Tape mode. AUX: toggles between AUX and CDR mode.
Â
6 CD / TUNER / TAPE /AUX
Â
9n
* = Press and hold the button for more than two seconds.
8
Functional Overview
0 TUNING S
       T (4ALBUM/TITLE3) CD: *s ...
|