RU760.qxd 04-06-2004 16:59 Pagina 1 Universal Instructions for use English 3 Mode d'emploi Français 15 Bedienungsanleitung Deutsch 27 Gebruiksaanwijzing Nederlands 39 Instruzioni per l'uso Italiano 51 Instrucciones de manejo Español 63 Manual de utilização Português 75 Brugsanvisning Dansk 87 Bruksanvisning Svenska 99 Bruksanvisning Norsk 111 Käyttöohje Suomi 123 SBC RU 760/00 6 RU760.qxd 04-06-2004 16:59 Pagina 2 1 VCR DVD SAT AMP CD 2 3 4 5 6 LEARN TITLE SELECT AUDIO GUIDE CHAPTER SUBTITLE DISC MENU SYST.MENU BACK TM ¡ ) ( * OK AV PP & ^ SOURCE TV VCR DVD 7 % 1 AUX 2 TUNER 3 CD 4 7 5 8 0 6 9 8 9 0 SHIFT $ # @ UNIVERSAL SBC RU 760 ! RU760.qxd 04-06-2004 16:59 Pagina 3 Instructions for use English 3 Contents 1. 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Automatically setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . 6 Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13 Programming Macros . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Learn a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Switching backlighting on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Reset a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Copy a device mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Reset all functions in a device mode . . . . . . . . . . . . . . . . . . . . . . . . 11-12 Assign Volume control to another mode . . . . . . . . . . . . . . . . . . . . . 12-13 Add a specific function to your remote control . . . . . . . . . . . . . . . . . . 13 Restoring all original functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . 134-142 3. 4. 5. 6. 1. Introduction Congratulations on your purchase of the Philips SBC RU760 universal remote control. After installing the remote control you can operate a maximum of 6 different appliances with it: TV,VCR, DVD, satellite tuner/cable decoder, CD player and amplifier/receiver. You can find information about how to prepare this remote control for use in the chapter `Installing the remote control'. RU760.qxd 04-06-2004 16:59 Pagina 4 Instructions for use 2. Installing the remote control Inserting the batteries 1 Press the cover inwards and slide it in the direction of the arrow. 2 3 Place two R6 AA type batteries into the battery compartment, as shown. Slide the cover back and click it firmly into place. English 4 Testing the remote control The remote control has been programmed to operate most Philips appliances. Because the RU760 may use different signals for each brand and even for different models of the same brand, it is advisable to test whether your appliance responds to the RU760. The example below (TV) instructs you how to do this. You can repeat the same steps for other appliances (DVD,VCR, etc.) which you want to operate using the RU760. Example of TV: 1 Turn your TV on manually or use the original remote control. Tune to channel 1. 2 Use the RU760's mode selector to select TV. Press the SELECT key until the green light around the Standby key lights up. VCR DVD SAT AMP CD To select the other devices press the SELECT key several times until the label of the device you want to operate, lights up. If neither the Standby key nor one of the labels light up, check whether the batteries are properly inserted (see `Inserting the batteries'). LEARN SELECT GUIDE TITLE AUDIO CHAPTER SUBTITLE 3 ­ Check whether all the keys are working. For an overview of the keys and their functions see `3. Keys and functions'. If the TV responds as it should to all of the key commands the RU760 is ready for use. AV PP SOURCE TV VCR DVD 1 AUX 2 TUNER 3 CD · If the device does not respond at all or not to all of the key commands, follow the instructions under `Setting the remote control'. RU760.qxd 04-06-2004 16:59 Pagina 5 Instructions for use This is only necessary if your appliance does not respond to the RU760. If that is the case, the RU760 does not recognize the brand and/or model of your appliance and you need to program the remote control to do so. The example below (TV) instructs you how to do this. You can repeat the same steps for other appliances (DVD,VCR, etc.) which you want to operate using the RU760. Example of TV: 1 Turn on the TV manually or use the original remote control. Tune in to channel 1. English 5 Setting the remote control 2 Look up the brand of your TV in the code list at the back of this manual. One or more four-figure codes are shown for each brand. Note the first code. Be careful! There are separate tables for TV, VCR, DVD, etc. Make sure you use the codes from the correct table. Select TV with the mode selector (See `Testing the remote control'.) VCR DVD SAT AMP CD 3 LEARN TITLE SELECT AUDIO GUIDE CHAPTER SUBTITLE 4 Keep the LEARN key pressed for 5 seconds until the green light around the Standby key blinks twice and then remains lit. VCR DVD SAT AMP CD LEARN TITLE SELECT AUDIO GUIDE CHAPTER SUBTITLE DISC SYST MENU 5 ­ Enter the code noted in step 2, using the digit keys. The green light will now blink twice. If the light blinks once for an extended period, the code has not been entered properly or the wrong code has been entered. Start again from step 2. Point the RU760 at the TV and check that it responds as it should. If the TV responds to all of the key commands, the RU760 is ready for use. Do not forget to note your code. If the device does not respond at all, or not to all of the key commands, start again from step 2 and try the next code from the list. 6 ­ · RU760.qxd 04-06-2004 16:59 Pagina 6 Instructions for use Automatically setting the remote control If you cannot find the right code for your brand device, the remote control can automatically search for the right code. Example of TV: 1 Make sure the TV is switched on and select a channel using the original remote control or the keys on the TV (for example channel 1). The RU760 emits the `switch off TV' signal for all models of TV that are stored in the memory. · If the device is a DVD-player or VCR, insert a disk or tape and start playback. English 6 2 Keep the LEARN key pressed for 5 seconds, until the green light around the Standby key blinks twice and then remains lit. VCR DVD SAT AMP CD LEARN TITLE SELECT AUDIO GUIDE CHAPTER SUBTITLE DISC SYST.MENU 3 Press the Standby key of the RU760 briefly. VCR DVD SAT AMP CD LEARN SELECT GUIDE ­ The RU760 now starts emitting all known `TV off ' signals, one by one. Each time a code is sent, the green light around the Standby key lights up. VCR DVD SAT AMP CD LEARN SELECT GUIDE 4 ­ When your TV switches off (standby), press the Standby key of the RU760 immediately to confirm. The RU760 has now found a code that works on your TV. VCR DVD SAT AMP CD LEARN SELECT GUIDE 5 · Check if you can operate all functions on your TV with the RU760. If this is not the case, you can redo the automatic setting.The RU760 will then search for a code that perhaps works better. After the RU760 has run through all the known codes, the search will stop automatically and the green light will stop blinking. Automatic programming of a TV takes a maximum of 3 minutes. ­ ­ RU760.qxd 04-06-2004 16:59 Pagina 7 Instructions for use English 7 3. Keys and functions The illustration on page 3 gives an overview of all keys and their functions. 1 y Standby . . . . . . . . switches TV,VCR, SAT, AMP, DVD or CD mode on or off. 2 LEARN . . . . . . . . . . switches the RU760 in programming or learning mode. 3 MENU . . . . . . . . . . . turns the menu on and off. 4 Cursor ring. . . . . . . cursor up, down, left and right in a menu. 5 AV . . . . . . . . . . . . . . . selects external Audio/video input(s). 6 - a + . . . . . . . . . . . . Volume up / down of TV or Amplifier. 7 Digit keys . . . . . . . . direct choice of channels and other functions. 8 SHIFT . . . . . . . . . . . for extra functions. When pressed at the same time as a second key, the second key will get another function. For example: SHIFT + 2: . . . . . . . Record SHIFT + 5: . . . . . . Previous track SHIFT + 6: . . . . . . Next track SHIFT + BACK: . . System menu (DVD) Try out other combinations with the Shift-key on your appliance in order to find out which functions are available. Only functions featured on the original remote control are available. 9 5 . . . . . . . . . . . . . . . . VCR/CD/DVD: Rewinds the tape or disc TV/SAT/CBL: Red fasttext key 0 9 . . . . . . . . . . . . . . . . VCR/CD/DVD: Stops the tape or disc TV/SAT/CBL: Green fasttext key ! 1 . . . . . . . . . . . . . . . . VCR/CD/DVD: Play tape or disc Shift+Play: Record TV/SAT/CBL: White fasttext key @ ; . . . . . . . . . . . . . . . . . VCR/CD/DVD: Pause TV/SAT/CBL:Yellow fasttext key # 6 . . . . . . . . . . . . . . . . VCR/CD/DVD: Winds the tape or disc TV/SAT/CBL: Blue fasttext key $ -/-- . . . . . . . . . . . . . . . selects between one- and two-figure channel numbers. % s . . . . . . . . . . . . . . . . mutes the sound of the TV or Amplifier. ^ - P + . . . . . . . . . . . . . Program up/down, Channel up/down, Next/previous. & P( P . . . . . . . . . . . . . . Previous program/channel. * OK. . . . . . . . . . . . . . . OK, Enter, Acknowledge. ( BACK . . . . . . . . . . . . jumps back one level in the Menu, or turn off Menu. ) . . . . . . . TV: teletext on/off, hold, movie expand VCR: timer, Showview SAT/CBL: teletext, Info, Guide, Subtitle DVD: title, audio chapter, subtitle AMP: Surround mode CD: Shuffle ¡ GUIDE . . . . . . . . . . . Guide, info or white TM SELECT. . . . . . . . . . selects the device you want to operate: TV,VCR, SAT (satellite/cable), AMP, DVD or CD. If you use the (fi) 'memory off' key to get to the next teletext page on your Philips TV, you can press the Subtitle key for this. See also `Troubleshooting'. If the device does not respond at all, or not to all of the key commands, follow the instructions under `Setting the remote control'. It is possible that you must enter another code for the device. RU760.qxd 04-06-2004 16:59 Pagina 8 Instructions for use 4. Extra possibilities Programming Macros A macro allows you to automate actions you have to do frequently with your remote control. E.g. if you want to watch a DVD, you have to turn on the DVD, turn on the TV, turn on the receiver/amplifier, select the DVD input channel on your amplifier and start playing the DVD.The different keys you have to press to do this, can be stored under one single key. So you only have to press one button to start up your system for watching a DVD. Example `Watching DVD' macro: 1 Select the required mode with the SELECT key, e.g. DVD mode. VCR DVD SAT AMP CD English 8 LEARN TITLE SELECT AUDIO GUIDE CHAPTER SUBTITLE 2 Press keys 1 and 6 of the RU760 simultaneously for 5 seconds until the DVD label blinks twice and then remains lit. SOURCE TV VCR DVD 1 AUX 2 TUNER 3 CD 4 7 SHIFT 5 8 0 2 TUNER 6 9 3 CD 3 Press keys 9, 9 and 1, in that order. 1 AUX 4 7 SHIFT 5 8 0 6 9 4 ­ ­ ­ 5 · · · · Press the key under which you want to OK store the macro, e.g. the P( P key. Notes: AV PP Once a macro is stored under a key, the original function of the key can not be used anymore. You can also store the macro by pressing Shift in combination with a target key (the target key keeps its original function). You cannot store a macro under the SELECT, LEARN or SHIFT key. Enter the sequence of keys to be stored, e.g.: Select DVD mode with SELECT key and press the Standby key. Select TV mode with SELECT key and press 1. Select AMP mode with SELECT key and press the Standby key. Select DVD mode with SELECT key and press 1. To close the macro press the LEARN key. The DVD label blinks twice to confirm. If you now select DVD mode and press the P( P key, the remote will switch on the DVD, the TV and the AMP and starts playing the disc. 6 ­ · VCR DVD SAT AMP CD LEARN TITLE SEL ...