SCD530 1 19 1 2 12 3 4 5 6 14 13 16 11 10 9 8 7 17 21 15 18 20 9 1 2 3 4 5 13 14 8 7 6 12 15 16 11 17 18 10 1 2 3 4 5 6 7 8 9 EngliSh 8 ESpañol 5 FrançaiS (CanaDa) SCD530 EngliSh Some of the following information may not apply to your particular product; however, when using baby monitor equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Unplug this appliance during lightning storms or when not used for long periods of time. 13 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14 This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. 15 Use this appliance only for its intended use as described in this manual. 16 Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. 17 Products should not be used while you are in a bathtub, shower or pool. Immersion of the product in water could cause an electrical shock. 18 This product should be operated only from the type of power source indicated on the type plate of the adapters (A15,B9). If you are not sure of the type of power supply to your home, consult your dealer or local power company. 19 Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 20 Never push objects of any kind into this product through casing slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 21 To reduce the risk of electric shock, do not disassemble this product, but call 1-800-54-AVENT (1-800-542-8368) for assistance. Opening or removing covers (except battery compartment lids) may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 22 To prevent strangulation with power cord, never place monitor within reach of child. Do not use with extension cords. iMporTanT SaFETY inSTrUCTionS EngliSh if your product utilizes batteries, the following additional precautions should be observed: Use only the type and size of batteries specified in the user manual. Do not dispose of batteries in fire. They may explode. Check with local regulations for possible special disposal instructions. 3 Exercise care in handling batteries in order not to short out the batteries with conducting materials such as rings, bracelets and keys. Overcharging, short circuiting, reverse charging, mutilation, or incineration of batteries must be avoided to prevent one or more of the following occurrences: release of toxic materials, release of hydrogen and/or oxygen gas, rise in surface temperature. 4 Do not attempt to recharge batteries provided with or identified for use with this product that are not intended to be charged. The batteries may leak corrosive electrolyte or explode. 5 Do not attempt to rejuvenate the batteries provided with or identified for use with this product by heating them. Sudden release of battery electrolyte may occur, causing burns or irritation to eyes or skin. 6 If and when necessary, the batteries must be replaced with identical new ones from the same manufacturer. If a battery to be replaced is connected with other batteries in series, it is recommended that the other batteries be replaced with new ones at the same time. 7 Reverse polarity installation of the batteries in the end product must be avoided. Reverse insertion of batteries can cause charging, and that may result in leakage or explosion. 8 Remove batteries from this product if you store the product over 30 days because the batteries could leak and damage the product. 9 Discard `dead' batteries as soon as possible since `dead' batteries are more likely to leak in a product. If a battery has leaked or vented, it should be replaced immediately using protective gloves. 10 Do not store this product, or the batteries provided with or identified for use with this product, in high-temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage. 11 If your product uses rechargeable batteries, charge the batteries only in accordance with the instructions and limitations specified in the user manual. 12 There is a risk of explosion if batteries are replaced with an incorrect type. For the parent unit, always use the SCD530 Li-Ion rechargeable battery pack as supplied with the appliance. 1 2 SaVE ThESE inSTrUCTionS - CaUTion:ThE SYMBol ShoWn in FigUrE 1 MEanS ThaT ThErE iS a riSK oF EXploSion oF ThE BaTTEriES anD/or oF SErioUS DaMagE To ThE BaBY MoniTor iF ThE BaTTEriES or ThE aDapTEr arE rEplaCED WiTh an inCorrECT TYpE. (Fig. 1) Adapter for baby unit: - Input: 120 VAC 60 Hz - Output: 7.5 VDC 400 mA - Adapter no. UD075040B Adapter for charger: - Input: 100-240 VAC 50/60Hz - Output: 7.5VDC 500mA 8 EngliSh - Adapter no. SSA-5W-09 US 075050F The socket-outlet shall be installed near the equipment and shall be easily accessible. For the baby unit, only use 1.5V AA alkaline batteries (batteries not supplied). For the parent unit, only use the SCD530 Li-Ion rechargeable battery pack as supplied with the appliance. Dispose of used batteries according to the instructions. Compliance information The FCC ID number is located on the casing bottom of the parent unit and in the battery compartment of the baby unit. The term `IC' before the certification number signifies that Industry Canada technical specifications were met.This certification means that the equipment meets certain radio communications and operational requirements. This device complies with Part 15 of the FCC Rules and ICES-003 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This device complies also with RSS-213 of Industry Canada. radio interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and applicable Industry Canada specifications. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. rF radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. For handheld operation, this equipment has been tested and meets the FCC RF exposure guidelines. For body-worn operation, this product has been tested and meets the FCC RF exposure guideline when used with the belt clip or neck strap supplied with this product. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment also complies with Industry Canada RSS-102 with respect to Canada's Health Code 6 for Exposure of Humans to RF Fields. Do not attempt to repair or modify this equipment Any repairs or alterations made by the user to the equipment may void the warranty and compliance of the equipment. Refer servicing to authorized or designated service centers. introduction Congratulations on your purchase and welcome to Philips AVENT! To fully benefit from the support that Philips AVENT offers, register your product at www.philips.com/welcome. Philips AVENT is dedicated to producing caring, reliable products that give parents the reassurance they need. This Philips AVENT baby monitor provides round-the-clock support by ensuring you can always hear your baby clearly without any distracting noise. The DECT technology guarantees zero interference from other wireless appliances and a crystal clear signal between the baby unit and the EngliSh parent unit. The temperature and humidity sensor enables you to monitor the climate in your baby's room, and offers you personalized settings to help keep your baby's room healthy and comfortable. general description (Fig. 2) a 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 C 1 2 3 4 5 parent unit On/off button 3 Slot for belt clip TALK button MENU button LINK light Microphone Loudspeaker Menu and volume +/­ buttons OK button Display Sound level lights Belt clip Adapter Small appliance plug Charger Charging light Neck strap Compartment for rechargeable battery pack Opening for neck strap Lid of compartment for rechargeable battery pack Rechargeable battery pack (included) Baby unit On/off button 3 PAGE button Display Power-on light Volume +/­ buttons Nightlight button Q Lullaby button K Play/stop button E Microphone Adapter Large appliance plug Cooling vents Loudspeaker Temperature and humidity sensor Socket for large appliance plug Non-rechargeable batteries (not included) Compartment for non-rechargeable batteries Lid of compartment for non-rechargeable batteries Display $ = temperature alert Ñ° = room temperature indication g = sound alert r= humidity indication s = paging symbol 10 EngliSh 6 K = lullaby symbol 7 Q = nightlight symbol 8 T = battery symbol 9 Volume/microphone sensitivity indications: - g = volume off - h = minimum sensitivity/volume - i = maximum sensitivity/volume Other display indications (not shown): - 'High' = room temperature above temperature set in menu - `Low' = room temperature below temperature set in menu - `Not linked' = no connection between units* - 'Paused' = lullaby is interrupted - `Searching' = units are searching for connection* - `Linked' = units are linked* - 'Talk' = talk function is active * This is only shown on the display of the parent unit. D Travel pouch important , , , , , , , , , , , , , , , , , , , Read the user manual carefully before you use the appliance and save it for future reference. This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. This monitor is not intended to be used as a medical monitor and its use should not replace adult supervision. Check if the voltage indicated on the adapter corresponds to the local electrical voltage before you connect the appliance. This appliance is suitable for electrical outlet voltages of 10V. Use and store the appliance at a temperature between 50°F (10°C) and 10°F (0°C). Do not expose the baby monitor to extreme cold or heat or to direct sunlight. Make sure the baby unit and power cord are always out of reach of the baby (at least feet/1 meter away). Never place the baby unit ins ...