SCD589 EN FR ES User manual Mode d'emploi 4 28 Instrucciones de manejo 52 A. Baby unit 1 11 10 9 8 7 13 2 3 4 5 6 + + 14 B. Parent unit 9 11 1 8 7 6 + + 10 13 2 3 5 4 + + + + 14 15 16 3 + + 12 17 12 + + EN Welcome Philips is dedicated to producing caring, reliable products to give parents the reassurance they need. You can trust this Philips baby monitor to provide round-the-clock support by ensuring you can always hear your baby clearly without any disturbing noise.Your SCD589 uses DECT technology which guarantees zero interference from other wireless appliances and a clear signal between the parent unit and baby unit. Philips Baby Care, taking care together S This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. Some of the following information may not apply to your particular product; however, when using baby monitor equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1 Read this user manual carefully before using the product and keep it for future reference. 2 Follow all warnings and instructions marked on the product. 3 Use this product for its intended household use as described in this manual. Do not use attachments not recommended by Philips Electronics North America Corporation. 4 Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5 Products should not be used while you are in a bathtub, shower or pool. Immersion of the product in water could cause an electrical shock. 6 Slots and openings in the cabinet back or bottom are provided for ventilation, to protect it from overheating.These openings should not be blocked or covered.The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface.This product should not be placed in a built-in installation unless proper ventilation is provided. 7 This product should be operated only from the type of power source indicated on the type plate of the adapters (A-14, B14). If you are not sure of the type of power supply to your home, consult your dealer or local power company. 8 Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it. 9 Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 10 Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 11 To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service personnel when service or repair work is required. Opening or removing covers (except battery compartment covers) may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 12 Do not expose the product to extreme temperatures such as areas near a hot radiator or stove or in a hot car. 13 Do not place lighted candles, cigarettes, cigars, etc., on the product. IMPORTANT SAFETY INSTRUCTIONS 4 Welcome 14 Unplug this product from the wall outlet, discontinue use and return the product to the Philips Service Location for examination and repair under the following conditions: A.When the power supply cord or plug is damaged or frayed. B. If the product has been exposed to rain or water. C. If the product does not operate normally by following the operating instructions. D. If the product's cabinet has been damaged. E. If the product exhibits a distinct change in performance. 15 Do not place this product on an unstable cart, stand or table.The product may fall, causing serious damage to the product. 16 Make sure the baby unit and adapter cable are always out of reach of the baby (at least 1 meter / 3 feet away). 17 Never place the baby unit inside the baby's bed or playpen. 18 Never cover the baby monitor (with a towel, blanket, etc.). EN If your product utilizes batteries, the following additional precautions should be observed: Use only the type and size of the battery(ies) specified in the user manual. Do not dispose of the battery(ies) in fire.They may explode. Check with local regulations for possible special disposal instructions. 3 Exercise care in handling battery(ies) in order not to short out the battery(ies) with conducting materials such as rings, bracelets and keys. Overcharging, short circuiting, reverse charging, mutilation, or incineration of the cells and the batteries must be avoided to prevent one or more of the following occurrences: release of toxic. materials, release of hydrogen and/or oxygen gas, rise in surface temperature. 4 Do not attempt to recharge the battery(ies) provided with or identified for use with this product that are not intended to be charged.The battery(ies) may leak corrosive electrolyte or explode. 5 Do not attempt to rejuvenate the battery(ies) provided with or identified for use with this product by heating them. Sudden release of the battery(ies) electrolyte may occur causing burns or irritation to eyes or skin. 6 If and when necessary, these cells or batteries must be replaced with identical new ones from the same manufacturer. If a cell or a battery to be replaced is connected with other cells or batteries in series, it is recommended that the other cells or batteries be replaced with new ones at the same time. 7 Reverse polarity installation of the cell or the battery(ies) in the end product must be avoided. Reverse insertion of battery(ies) can cause charging, and that may result in leakage or explosion. 8 Remove battery(ies) from this product if storing over 30 days because the battery(ies) could leak and damage the product. 9 Discard `dead' battery(ies) as soon as possible since `dead' batteries are more likely to leak in a product. If a cell or a battery has leaked or vented, it should be replaced immediately using protective gloves. 10 Do not store this product, or the battery(ies) provided with or identified for use with this product, in high-temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting. Batteries should be stabilized at room temperature prior to use after cold storage. 1 2 5 EN Welcome 11 If your product use rechargeable battery(ies), charge the battery(ies) only in accordance with the instructions and limitation specified in the user manual. 12 Risk of explosion if batteries are replaced by an incorrect type. For the parent unit, always use rechargeable batteries. SAVE THESE INSTRUCTIONS S CAUTION: Unplug power cord before replacing batteries. S Use only the adapter supplied with this baby monitor. Incorrect adapter polarity or voltage can seriously damage the baby monitor. Adapters for baby unit and charger: Input: 120 VAC 60 Hz Output: 9 VDC 300 mA SCAUTION: THERE IS A RISK OF EXPLOSION IF THE BATTERIES ARE REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Use 1.5V AA size alkaline batteries only for baby unit (batteries not supplied). Use 1.2V AAA size Ni-MH rechargeable batteries only for parent unit (batteries supplied). Legend of functions A. Baby unit A-1 A-2 A-3 A-4 A-5 A-6 A-7 A-8 A-9 A-10 A-11 A-12 A-13 A-14 On/Off button (y) Temperature sensor LINK light Volume ­ / + buttons PAGE button Microphone Night light button ( ) Lullaby button ( ) Play/stop button (BL) Night light Display Battery compartment cover DC 9V / 300mA power supply jack AC power adapter 6 Legend of functions B. Parent unit B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 B-9 B-10 B-11 B-12 B-13 B-14 B-15 B-16 B-17 B-18 TALK button MENU button LINK light Loudspeaker Microphone On/Off button (y) OK button Display Sound level lights Volume ­ / + buttons Recess for the belt clip or neck strap Battery compartment cover Belt clip AC power adapter Charging base POWER light Neck strap Travel bag EN C.What else you need Both units can be battery operated. For battery-operated use you'll need: ­ 4 x 1.5V AA non-rechargeable batteries for baby unit. Not supplied. ­ 2 x 1.2V AAA Ni-MH rechargeable batteries for parent unit. Supplied. 7 EN Legend of functions D. Display Room temperature indicator Battery indicator Volume indicators Night light indicator Lullaby indicator Microphone sensitivity indicator U - Room temperature above temperature set in menu I - Room temperature below temperature set in menu O - No connection between units { - Volume indication S - Playback of lullaby interrupted Contents 3 4 4 Illustrations Welcome Important safety instructions 13 14 14 15 6 6 7 7 8 Legend of functions Baby unit Parent unit What else you need Display 16 16 17 17 17 18 18 18 Switching night light on / off Paging the parent unit Playing lullabies Connecting / disconnecting belt clip and neck strap Menu operation - General explanation Switching nightlight on / off Playing lullabies Adjusting microphone sensitivity Switching sound alert on / off Setting room temperature range Setting temperature alert Setting display temperature indication 16 Menu options 8 9 9 10 Contents Preparing your baby monitor Baby unit Parent unit 11 Using your baby monitor 12 Other features 12 13 13 8 19 Troubleshooting 21 Frequently asked questions Adjusting loudspeaker volume Talking to your baby Monitoring baby silently Contents 22 Important information 22 22 23 23 24 24 25 Technical specifications Maintenance Environmental information Factory initialization mode Compliance information Radio Interference FCC RF Radiation Exposure Statement EN 25 Assistance 26 Warranty Preparing your baby monitor Baby unit The baby unit can be operated by power supply or batteries. When batteries are inserted, you will have an automatic back-up in case of power supply failure. Cord operated use 1 Connect the power adapter cord (A-14) to the power supply jack (DC 9V / 300mA - A-13) of the baby unit. 2 Connect the AC power adapter (A-14) to a wall outlet. The baby unit is now ready for cord operated use! Battery operated use 1 Open the battery compartment by turning the cover (A-12) to the left (C OPEN), using the palm of your hand. Take the cover off. ++ 2 Insert four 1.5V AA batteries, noting the + and ­ configuration inside the battery compartment (batteries are not supplied; we recommend Philips Alkaline batteries). ++ + 9 EN Preparing your baby monitor 3 Put the battery compartment cover (A-12) back in place. Close the compartment by turning the cover (A-12) to the right (CLOSE B), using the palm of your hand. Note:When the units are switched off, in case of battery operated use, the batteries will still discharge slowly. The baby unit is now ready for battery operated use! Parent unit 1 Open the battery compartment by sliding the cover (B-12) downwards. + + + + 2 Insert the two 1.2V AAA size NiMH rechargeable batteries (supplied), noting the + and ­ configuration inside the battery compartment. + 10 + 3 Put the battery compartment cover (B-12) back in place. Close the compartment by sliding the cover (B-12) upward until it clicks in position. 4 Connect the AC power adapter (B-14) of the charging base (B-15) to a wall outlet. 5 Place the parent unit in the charging base (B-15). > The POWER light (B-16) lights up red. 6 Leave the parent unit in the charging base until the batteries are fully charged (at least 16 hours). > The POWER light (B-16) will stay red, even when batteries are fully charged. > When the batteries are fully charged, the parent unit can be taken out of the charging base and used cordlessly for at least 8 hours. > When the battery indicator ( ) in the display (B-8) is empty and the parent unit beeps, battery power is low. Place the parent unit in the charging base (B-16) to recharge the batteries. Preparing your baby monitor Notes: ­ Operation time will be 8 hours based on the assumption that the baby unit will be transmitting 25% of the time and is in standby mode for the rest of the time (baby does not any make sound). ­ When the parent unit batteries are charged for the first time, operating time will be less than 8 hours.The batteries will use their maximum capacity after at least four times charging and discharging. ­ Charging will take longer than 16 hours when the parent unit is switched on during charging.To shorten the charging time, the parent unit should be switched off. The parent unit is now ready for use! EN Using your baby monitor Use this baby monitor for its intended houshold use as described in this manual. 1 Place both units in the same room to test the connection. Make sure the baby unit is at least 1 meter / 3 feet ...