User manual PINNACLE DAZZLE TV MOBILE

Dazzle*TV mobile Hardware Dazzle*TV mobile Hardware GB 03/2006 © Pinnacle Systems GmbH 2006 All rights reserved. No part of this manual may be reproduced or transferred to other media without explicit written permission from Pinnacle Systems GmbH, Braunschweig, Germany. All brand or product names are trademarks or registered trademarks of their respective holders. Pinnacle Systems hereby declares that this TV reception equipment complies with the fundamental requirements and other relevant terms and conditions of EC directive number 89/336/EEC. The EC and FCC declarations of conformity and identical construction can be downloaded from http://www.pinnaclesys.com/compliance. Pinnacle Systems GmbH has written this manual to the best of its knowledge, but does not guarantee that the programs/systems will fulfill the users' intended applications. No warranty is made as to the specifications of features. Pinnacle Systems GmbH retains the right to make alterations to the content of the manual without obligation to inform third parties. All quotes, sales, supply and manufacturing contracts from Pinnacle Systems GmbH, including consulting, installation and other contractual services are subject exclusively to the General Sales and Delivery Terms of Pinnacle Systems GmbH. Disposal and Recycling Do not dispose of electric components in the garbage. Either return defective or unwanted devices to the retailer or take them to an appropriate recycling station! System requirements Your system must satisfy the following requirements in order for Dazzle*TV mobile to function without problems: Computer hardware Processor Minimum: Pentium IV 2.0 GHz, Pentium M 1.3 GHz or equivalent AMD Athlon XP processor Recommended: Pentium IV 2.5 GHz, Pentium M 1.5 GHz or equivalent AMD Athlon 64 processor Memory Minimum: 256 MB RAM Recommended: 512 MB RAM Hard disk Minimum: IDE hard disk with master mode drivers and 5 GB free disk space Recommended: U-DMA hard disk with 20 GB free disk space Graphics card Minimum: DirectX 8-compatible graphics card Recommended: DirectX 9-compatible (or higher) graphics card Sound card Minimum: DirectX 9-compatible sound card USB port USB 2.0 port (high speed compatible) CD-ROM / DVD-ROM drive or recorder Minimum: CD-ROM or DVD-ROM drive Recommended: CD or DVD recorder Computer software Windows XP (Home Edition, Professional Edition or Media Center Edition 2005) with the latest Service Pack 1 Antenna connection Hook up the antenna input of Dazzle*TV mobile to your house antenna (coaxial connection) or to your cable connection. To connect the antenna, you need the corresponding cable. Note that the quality of the cable has a great influence on the quality of the reception. PC connection Insert the USB connector of Dazzle*TV mobile into your PC. Use only the USB cable included in the delivery. Video device connection Connect your video source (for example, a camcorder, video recorder or DVD player) to the audio input and to the corresponding video input of Dazzle*TV mobile. You can use any video device that delivers an S-video signal or a composite video signal in PAL, NTSC or SECAM (for example, a video recorder, camcorder or DVD player). This is independent of the video system used (for example, VHS, S-VHS, Hi8 or Video 8). Note that, depending on the product variant, not all video standards (PAL, NTSC or SECAM) are available. If your video source has a S-video output, connect this and not the composite video output to ensure better output quality. 2 Sample configuration 3 Technical Data Bus system USB 2.0 Antenna input 75 Ohm, F-connector or IEC Video input S-video input (mini-DIN), composite video input (cinch) Audio input Stereo audio input (3.5 mm jack plug) TV tuner Microtune MT2050 The tuner supports the following depending on it circuitry: PAL B/G/D/K/I/SECAM or NTSC, PAL M/N 4