User manual PLANAR PT191MU - Product Manual

PT191MU Touchscreen Monitor USER'S GUIDE www.planar.com Table of Contents Notice Usage Notice Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 troduc oduction I ntroduction About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 nstallation I nstallation Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Start Your Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 User Controls Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 How to Use the OSD Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 On-Screen Display Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Appendix Appendix Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Warning Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Compatibility Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Touchscreen Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2 PT191MU User's Guide (020-0418-00 A) Usage Notice ! ! WARNING ­ To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. WARNING ­ Please do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, precautions and maintenance as recommended in this user's manual to maximize the life of your unit. Do: Turn off the product before cleaning. Use only a dry soft cloth or clean room wiper when cleaning the LCD panel surface. Use a soft cloth moistened with mild detergent to clean the display housing. Use only high quality and safety approved AC/DC power adapter. Disconnect the power plug from AC outlet if the product is not used for a long period of time. on' Don't: Do not touch the LCD panel surface with sharp or hard objects. Do not use abrasive cleaners, waxes or solvents for cleaning. Do not operate the product under the following conditions: - Extremely hot, cold or humid environment. - Areas susceptible to excessive dust and dirt. - Near any appliance generating a strong magnetic field. - Place in direct sunlight. PT191MU User's Guide (020-0418-00 A) 3 Introduction About Planar's PT191MU The PT191MU is a 19" flat panel screen with an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). Features include: Analog and Digital dual signal input 19" diagonal screen size 1280 x 1024 high resolution 16.7 million displayable colors 31.5~80 kHz horizontal scan 56~75 Hz high refresh rate 0.294 mm x 0.294 mm pixel pitch 250 cd/m2(typ.) brightness 4 CCFT backlight lamps w/ 50,000 hrs life 1000:1(typ.) contrast ratio L/R=85°/85°, U/D =85°/85° viewing angle, CR=10:1 Tr + Tf:8 ms (typ.) response time Auto-adjustment function Integrated multimedia audio function Multilingual OSD user controls VESA DPMS power saving USB hub with 1 upstream and 2 downstream ports on the stand base Stand with tilt and swivel functions 3M® ClearTekTM Capacitive touchscreen 4 PT191MU User's Guide (020-0418-00 A) Touchscreen for PT191MU Surface: Anti-glare treatment Interface: USB Durability: Capacitive: 225 million activations Hardness of surface = Capacitive: 6.5 Mohs Transmittance: Up to 88% typical S/W Driver Compatibility: Windows® 95/98/Me/NT/2000/XP, Linux PT191MU User's Guide (020-0418-00 A) 5 Package Overview LCD Display Power Adapter Power Cord VGA Signal Cable DVI-D Cable Audio-In Cable USB Upstream Cable User's Guide Landing Strip Touchscreen Driver Installation CD-ROM 6 PT191MU User's Guide (020-0418-00 A) Installation Product Overview Front · Front View LCD Display Stand Front Panel Controls Rear · Rear View PT191MU User's Guide (020-0418-00 A) 7 · USB Hub Ports 1. USB Downstream Ports These two USB ports are available for connecting USB type peripheral devices such as keyboard, mouse, printer and so on. 2. USB Upstream Port This Port is for connecting the USB Upstream cable to computer's or other hub's USB port. 8 PT191MU User's Guide (020-0418-00 A) · VESA Mount your monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface Standard which defines a physical mounting interface for flat panel monitors, and corresponding standards for flat panel monitor mounting devices, such as wall and table arms.The VESA mounting interface is located on the back of your monitor. To mount the monitor on a swing arm or other mounting fixture, follow the instruction included with the mounting fixture to be used. ! Note! Please select the proper screws! The distance between the back cover surface and the bottom of the screw hole is 8mm. Please use a M4 screw. PT191MU User's Guide (020-0418-00 A) 9 Start Your Installation · Connecting the display (Figure 1.1) To setup this display, please refer to the following figure and procedures. 1. Be sure all equipment is off. 2. Connect the DC power cord to the power connector. Plug one end of the AC power cord into the power adapter, and the other end into an electrical outlet(1). 3. For the PC with Analog output: connect the VGA signal cable from display VGA input connector to the 15-pin connector of your host computer and tighten the screws(2). 4. For the PC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your computer; connect the other side to the DVI-D input port of your display. Tighten the screws(3). 5. Connect the Audio-In cable from audio input port of your display to the Audio-out port of your computer(4). 6. Connect the USB cable from USB port of your display to the USB port of your computer(5). 7. Turn on your computer, display and video source. Notice: To ensure the LCD display can work well with your computer, please configure the display mode of your graphic card to make it less than or equal to 1280 x 1024 resolution and make sure timing of the display mode is compatible with the LCD display. We have listed the "Compatibility Modes" of this LCD display in appendices for your reference. 10 PT191MU User's Guide (020-0418-00 A) igure Figure 1.1 PT191MU User's Guide (020-0418-00 A) 11 User Controls Front Panel Controls MENU SELECT/AUTO Menu button Select/Auto To pop up the OSD menus. Select- To select the adjustment items from OSD menus. Auto- To activate the "Auto Adjustment" function to obtain an optimum image. 1. Decreases the brightness of the display image. 2. Decreases value of the adjustment items. 1. Increases the brightness of the display image. 2. Increases value of the adjustment items. 1. Green indicates the display is turned on. 2. Amber indicates the display in power-saving mode. Switches on/off the power of the LCD display. Brightness Minus/Minus Brightness Plus/Plus Power LED Power Switch 12 PT191MU User's Guide (020-0418-00 A) How to Use the OSD Menus 1. Press the "MENU" button to pop up the on-screen menu and to select between the four main menus. 2. Choose the adjustment items by pressing the "SELECT/AUTO" button. 3. Adjust the value of the adjustment items by pressing the " " or " " button. 4. Once you don't operate the OSD menus after a pre-set time, the OSD menus will automatically disappear. PT191MU User's Guide (020-0418-00 A) 13 On-Screen Display Menus First OSD Menu: Auto-Adjustment* Choose this function to obtain an optimum image. Contrast Adjusts the contrast of the display image. Brightness Adjusts the brightness of the image. Horizontal Position* Changes the horizontal position of the image. Vertical Position* Changes the vertical position of the image. Clock* Changes the display data frequency to match the frequency of your graphics card. When you are experiencing vertical flickering bar, use this function to make an adjustment. Phase* Synchronizes the signal timing of the display with the graphic card. When you are experiencing unstable to flickering image, use this function to make an adjustment. * This function will be disabled under Digital mode 14 PT191MU User's Guide (020-0418-00 A) On-Screen Display Menus Second OSD Menu: Display Mode Selects this function to demonstrate the display resolution, vertical refresh, and horizontal scan of the current mode. Offff-T OSD Off-Time Adjusts the time period for OSD menu disappear. Language Chooses the language you need. Sharpness Adjust the sharpness of the image. Reset Returns the display parameters of the current mode to its factory default settings. PT191MU User's Guide (020-0418-00 A) 15 On-Screen Display Menus Third OSD Menu: Volume It allows you to control the volume sound. Mute It allows you to disable the sound immediately. Input Select It allows you to change the video mode between multiple connections. 16 PT191MU User's Guide (020-0418-00 A) On-Screen Display Menus Fourth OSD Menu: Color Setting Adjusts the color temperature. Color Adjustment-Red It allows you to adjust the red color of the display. Color Adjustment-Green It allows you to adjust the green color of the display. Color Adjustment-Blue It allows you to adjust the blue color of the display. PT191MU User's Guide (020-0418-00 A) 17 Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or our service center. appears screen. Problem: No image appears on screen. Check that all the I/O and power connectors are installed correctly and well connected as described in the "Installation" section. Make sure the pins of the connectors are not crooked or broken. Par artial incor ectly display image. orr Problem: Partial image or incorrectly displayed image. Check to see if the resolution of your computer is higher than that of the LCD display. Reconfigure the resolution of your computer to make it less than or equal to 1280 x 1024. Problem: Image has vertical flickering line bars. Use "Clock" to make an adjustment. Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. Image flickering Problem: Image is unstable and flickering Use "Tracking" to make an adjustment. Image scrolling Problem: Image is scrolling Check and make sure the VGA signal cable (or adapter) is well connected. Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. (charac act gr Problem: Vague image (characters and gr aphics) Use "Clock" to make an adjustment. If the problem persists, use "Phase" to make an adjustment. 18 PT191MU User's Guide (020-0418-00 A) Warning Signal Sometimes you probably will see the warning messages from this LCD screen. This means that the LCD display cannot exactly receive the signal from the computer graphic card. There are three kind of situations may happen. Please check with the connected cables or contact your local dealer for more information. No Signal This message means that the LCD display has been powered on but it cannot receive any signal from the computer graphic card. Check all the power switches, power cables, and VGA signal cable. Going to Sleep This message means that the LCD display is under the power saving mode. In addition, the LCD display will go to this sleeping mode when experiencing a sudden signal disconnecting problem. Unsupport Mode This message means that the signal of the computer graphic card is not compatible with the LCD display. When the signal is not included in the compatibility mode we have listed in the Appendices of this manual, the LCD display will appear this message. PT191MU User's Guide (020-0418-00 A) 19 Product Dimensions 20 PT191MU User's Guide (020-0418-00 A) Compatibility Modes M ode IBM VGA IBM VGA IBM VGA IBM VGA VESA VGA VESA VGA VESA SVGA VESA SVGA VESA SVGA VESA SVGA VESA XGA VESA XGA VESA XGA VESA SXGA VESA SXGA Apple Macintosh LC Apple Macintosh II Apple Macintosh Apple Macintosh Resolution 640 x 350 640 x 400 720 x 400 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 X 1024 1280 X 1024 640 x 480 640 x 480 832 x 624 1024 x 768 .Frequency V.Frequency (Hz) (Hz) 70 70 70 60 72 75 56 60 72 75 60 70 75 60 75 67 67 75 75 H.Frequency H.Frequency (kHz) (kHz) 31.5 31.5 31.5 31.5 37.9 37.5 35.2 37.9 48.1 46.9 48.4 56.5 60.0 64.0 80.0 34.9 35.0 49.7 60.2 PT191MU User's Guide (020-0418-00 A) 21 Touchscreen Driver Installation Driv Installa iver nstallation for Capacitiv ouchscreen apacitive Driver Installation for PT191MU: Capacitive Touchscreen with USB Connection. Touch driver information is located on the enclosed CD-ROM for the following operating systems: Microsoft Windows® XP, Windows 2000, Windows NT 4.0, icrosof indow XP, indow osoft indow Windows Me, and Windows 9X and Linux. Disconnect the USB Cable between the display and PC before installing Driver. iver the Driver. 1. Open the CD-Rom. 2. Select the link for your monitor model and PC operating system you are using for either Windows or Linux. 3. The driver will automatically open. 4. Follow the installation instructions. 5. When driver installation is complete, reconnect the USB cable. 6. Open the 3M Touchware icon located on your PC`s desktop. 7. Select the "Calibrate" tab and follow the calibration instructions. 8. If the touchscreen driver does not automatically load, restart the computer operating system. direc ect For Linux users open the " T WLinux 5.62.1" director and open the "readme.txt" file for installation instructions. 22 PT191MU User's Guide (020-0418-00 A) PT191MU User's Guide (020-0418-00 A) 23 Planar Systems, Inc. Customer Service Suppor port: 24x7 Online Technical Support: http://www.planar.com/support 1195 NW Compton Drive Beaverton, OR 97006-1992 Tel: 1-866-PLANAR1 (866) 752-6271 Email: PlanarSupport@planar.com Hours: M-F, 5am - 5pm Pacific Time © 2005 Planar Systems, Inc. 03/05 Planar is a registered trademark of Planar Systems, Inc. Other brands and names are the property of their respective owners. Technical information in this document is subject to change without notice. P/N:36.59504.002 Rev.B Document No. 020-0418-00 Rev A