User manual PLEXTOR PX-740A

Model PX-740A Internal ATAPI Drive DVD±R DL (DOUBLE LAYER/DUAL LAYER), DVD±R/RW, CD-R/RW DRIVE INSTALLATION AND USERS MANUAL MAY 2005 Plextor reserves the right to make improvements in the products described in this manual at any time without prior notice. Plextor makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further, Plextor Corp. reserves the right to revise this manual and to make changes in its content without obligation to notify any person or organization of such revision or change. This manual is copyrighted, all rights reserved. It may not be copied, photocopied, translated, or reduced to any electronic medium or machine-readable form without Plextor's prior permission. Manual copyright ©2005 Plextor Corp. First edition, May 2005. Licenses and Trademarks Plextor and the Plextor logo are registered trademarks of Plextor Corp. All other licenses and trademarks are property of their respective owners. Record Your Serial Number For future reference, record the serial number and the TLA code (found on your drive's label) in the space provided below. TLA/Firmware Revision Number FEDERAL COMMUNICATIONS COMMISSION STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CANADIAN DEPARTMENT OF COMMUNICATIONS STATEMENT This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. LASER INFORMATION These products have been designed and manufactured according to IEC 60825-1 on the Safety of Laser products. This product comes under "Class 1 Laser Products." CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. A Laser Caution Label is attached on the bottom of the internal drive model. The laser beam emitted from the optical pickup is visible and invisible. Accordingly: · Do not open the optical pickup housing. · Obtain service only from Plextor-authorized personnel. CAUTION: To disconnect the internal DVD/CD drive from an electrical current, pull out the computer's power plug. PX-740A Installation and Users Manual iii Bottom View of Internal Drive, Showing Caution Label Location Detail of PX-740A Laser Caution Labels iv PX-740A Installation and Users Manual Table of Contents 1. Getting Started ..............................................................................1 About this Manual...........................................................................1 What's In This Manual................................................................1 Printing the Manual .....................................................................1 Meet Your PX-740A .......................................................................2 What the PX-740A Does.............................................................2 Features of the PX-740A .............................................................2 Minimum Configuration to Use the PX-740A ............................5 What You Can Do with the PX-740A .........................................5 About Software ...............................................................................6 Precautions ......................................................................................6 Where to Go From Here..................................................................7 2. Installing the PX-740A Internal ATAPI Drive ...........................9 PX-740A Drive Features and Controls............................................9 Front Panel--PX-740A Internal Drive........................................9 Rear Panel--PX-740A Internal Drive.......................................10 What Else Is In the PX-740A Box ................................................11 Save Your Box!.........................................................................12 PX-740A QuickStart Installation ..............................................13 Mount the PX-740A Drive ............................................................14 Open the Computer and Prepare for Installation ...........................14 Determine Your Existing IDE Configuration................................15 Inspect Your Computer's Cables...................................................16 Confirm That You Have an 80-Conductor IDE Cable ..............17 Do You Have Cable Select? ......................................................18 Do You Need a Power Cable?...................................................19 Set the Drive's Mode Jumper ........................................................19 Changing the Mode Jumper on Your PX-740A Drive ..............20 Select an IDE Configuration .........................................................22 About Cable Select........................................................................27 Mount the PX-740A Drive ............................................................28 Record the Serial Number .........................................................28 Mount the Drive in the Computer .............................................28 Using Sound Boards and Audio Cables ........................................34 PX-740A Installation and Users Manual v Table of Contents 3. Using Your PX-740A .................................................................. 35 What Media to Use ....................................................................... 35 DVD Media............................................................................... 35 CD-ROM Media ....................................................................... 36 Tray Loading and Operation ......................................................... 37 Handling DVD and CD Media.................................................. 37 Cleaning Discs .......................................................................... 38 Mounting Position......................................................................... 38 Playing DVDs ............................................................................... 39 Writing to DVD Media ................................................................. 39 Specifying +R/RW or -R/RW ................................................... 39 Writing to CD-R and CD-RW Media ........................................... 39 Using the LED Indicator ............................................................... 40 4. Maintenance and Troubleshooting............................................ 41 Cleaning the PX-740A Drive........................................................ 41 Upgrading Firmware..................................................................... 42 Emergency Eject ........................................................................... 43 Troubleshooting ............................................................................ 44 Make Sure the Drive Is Recognized.......................................... 44 5. Frequently Asked Questions ...................................................... 47 Appendix A: PX-740A Specifications............................................ 49 Appendix B: Technical Support .................................................... 63 How to Contact Plextor Technical Support................................... 64 Before You E-mail or Call for Support......................................... 64 Returns .......................................................................................... 65 Contacting Plextor's RMA Department.................................... 65 Packing Your Drive .................................................................. 65 Shipping Your Drive to Plextor ................................................ 66 Appendix C: Warranty................................................................... 67 If You're Outside the U.S. or Canada ........................................... 68 Index................................................................................................. 69 vi PX-740A Installation and Users Manual 1. Getting Started Congratulations! Thank you for purchasing the Plextor® PX-740A, a reliable, high-performance recordable DVD and CD writer, rewriter, and player. We appreciate the confidence you have shown in us. Our goal is to put you--and keep you--on the leading edge of DVD and CD technology. About this Manual Please read this manual carefully and keep it handy for easy reference. Use the manual for installation, operation and troubleshooting. If your drive needs service, see your dealer or call Plextor's Technical Support Department. What's In This Manual In this manual you should find all the information you need to successfully install, operate and troubleshoot your drive. If you run into a problem that doesn't seem to be covered, however, please contact us. (See "Appendix B: Technical Support" for the different ways you can reach us.) You will be connected to our friendly, helpful band of tech support engineers. What might seem like an uncooperative drive to you could very well be a 30-second fix to them. But we will never know unless you contact us. Printing the Manual This manual has been sized for viewing on a computer monitor screen. To print a hard copy of this manual: 1. In Acrobat, select File | Print. You see the Print dialog box. 2. In the Print dialog box, choose the printer. 3. If you want to print on standard 8-1/2 x 11 paper, you can check the Expand small pages to paper size box. This expands the manual's pages so they nearly fill up a standard-sized page. 4. When you have made your selections, click OK. The manual is printed. PX-740A Installation and Users Manual 1 Section 1. Getting Started Meet Your PX-740A The PX-740A is a DVD ReWritable/CD ReWritable drive that provides professional quality DVD and CD performance for writing, rewriting and reading. What the PX-740A Does For DVDs, the PX-740A: · Writes DVD+R (recordable DVD, "plus" format) media at up to 16X speed on recommended 16X media. · Writes DVD+R DL (double layer) media at up to 8X speed. · Writes DVD-R DL (dual layer) media at up to 4X speed. · Writes DVD-R (recordable DVD, "dash" format) media at up to 16X speed on recommended 16X media. · Writes DVD+RW (rewritable DVD, "plus" format) media at up to 8X speed. (Requires 8X media for 8X writing.) · Writes DVD-RW (rewritable DVD, "dash" format) media at up to 6X speed. · Supports DVD+VR format for read and write. · Reads stamped DVD discs at up to 16X. · Reads DVD-Video discs with CSS at up to 4X CAV. For CDs, the PX-740A: · Writes to CD-R (recordable CD) media at up to 48X speed. · Writes to CD-RW (rewritable CD) media at up to 32X speed. · Reads all CD-ROM, CD-RW, and CD-R data media at a maximum of 48X speed. · Reads CD-DA (audio) and CD-R audio media at up to 40X speed. · Reads CD-RW audio media at up to 40X speed. Features of the PX-740A · ATAPI interface: The PX-740A easily installs in virtually any PC with an E-IDE ATAPI interface. · High speed transfers: The PX-740A supports data transfers via Ultra DMA33, DMA Mode 2, and PIO Mode 4. 2 PX-740A Installation and Users Manual Section 1. Getting Started · MMC compliance: Supports the MMC-4 command set. · Flash memory: Allows upgrading the PX-740A to the latest firmware revision (available free from the Plextor web site) without opening the computer or physically accessing the drive. · Black tray: Reduces the effect of optical distortion by absorbing reflections from the laser beam, enhancing read quality. · Plug and Play: Supports Windows Plug and Play. · Digital and analog audio outputs: The PX-740A has output connectors for both digital (SPDIF) and analog audio output. · CPRM support: The PX-740A supports Content Protection for Recordable Media, so you can play CPRM copy-controlled media. · Small form factor: To save space inside your computer, depth of the PX-740A is just 6.99 inches (177.5 millimeters), including the bezel. DVD Features · Lossless linking for DVD+R/RW and DVD+R DL: Allows DVD+RW discs to be edited and still play on DVD-ROM players. · Zero Link for DVD-R/RW, DVD-R DL: Has 0 byte gap between sessions so the discs are compatible with all players. This allows DVD-RW discs to be edited and still play on DVD-ROM players. · Double layer and dual layer DVD discs: Reads and writes DVD+R DL (double layer) and DVD-R DL (dual layer) discs, so you can burn up to 4 hours of high quality MPEG-2/DVD video on a single 8.5-gigabyte DVD disc. · Wide DVD+R/RW and DVD-R/RW media compatibility: Compatible with a wide range of DVD±R and DVD±RW media. · Multiple DVD types: Supports DVD-ROM, DVD-Video, multiborder, multi-session and DVD+VR, for read and write. PX-740A Installation and Users Manual 3 Section 1. Getting Started · Versatile recording modes for DVD+R/RW: Including disc-at-once (DAO) for DVD+R DL (double layer) discs; DAO, multi-session, and incremental write for DVD+R; and random access write and sequential write for DVD+RW. · Recording versatility for DVD-R/RW, too: Including sequential write for DVD-R DL (dual-layer); DAO, incremental recording, multiborder recording for DVD-R; and DAO, multi-border recording, incremental recording, and restricted overwriting for DVD-RW. CD-R and CD-RW Features · Variety of recording modes: Supports track-at-once, disc-at-once, session-at-once, multi-session, and variable and fixed packet writing. · Buffer Underrun Proof Technology: Eliminates buffer underrun errors, so you can safely use your computer for other tasks while you're writing to a CD-R or CD-RW disc. · Wide compatibility: Wide CD-R and CD-RW media compatibility. · Orange Book compatibility: Compatible with Orange Book, Parts II and III. · OPC and ROPC: Optimum Power Control and Running Optimum Power Control, which adjust the laser power for the optimum write strategy. · CD-TEXT, CD+G: Supports CD-TEXT and CD+G reading. · Overburn: A way of burning more information onto a CD--audio up to 99 minutes 59 seconds in length, or a data disc up to 875 megabytes in capacity. 4 PX-740A Installation and Users Manual Section 1. Getting Started Minimum Configuration to Use the PX-740A Here's what you'll need in order to install and use the PX-740A drive. · Computer: Pentium 4, 1.4-GHz or faster CPU. · Minimum RAM: 256 MB. · Interface: Model PX-740A requires an IDE ATAPI interface. · Hard disk size: To write to a CD in image mode (that is, to write an image of a CD to your hard disk), you need 1 GB of free space. For a DVD, 10 GB of free space is recommended. (For more accurate guidelines, see the help files or documentation for the recording software you're using.) · Operating System: Model PX-740A requires Windows XP, 2000, Me, or 98SE. NOTE: You cannot use the PX-740A with early versions of Windows 98; if you are using Windows 98, it must be Windows 98SE (Second Edition). What You Can Do with the PX-740A Just look at some of the things you can do with your PX-740A: · Record slide shows or digital video onto DVD+R DL, DVD-R DL, DVD+R, DVD-R, DVD+RW and DVD-RW discs. · Play DVD-ROM, DVD+R DL, DVD-R DL, DVD+R, DVD+RW, DVD-R, and DVD-RW discs. · Record data or audio onto writable or rewritable CD media. · Play music CDs. · Save photos and other images on rewritable or writable CDs. · Create a CD or DVD "sneakernet" to share information with colleagues--just use software such as Ahead Software's InCD 4 to drag and drop files onto DVD+R, DVD+RW, CD-R or CD-RW media, then continue adding files and sharing the same disc. · Archive images and video to DVD or CD. · Master new software programs on DVD or CD. PX-740A Installation and Users Manual 5 Section 1. Getting Started About Software In order to record on DVD±R DL, DVD±R/RW, and CD-R/RW discs you will need to have mastering, packet writing, or duplication software installed on your computer system. If you purchased a retail kit from Plextor, you'll get software packages that include such software. Ahead's Nero software is one software suite that lets you burn DVDs and CDs. The software lets you burn and share anything on CD or DVD, including music, photos, and videos; and you can easily back up your critical data to a CD or DVD. One component of Nero is InCD 4, which makes the Plextor PX-740A drive as easy to use as a hard disk drive. (For more information about Nero, install this application and examine the help files.) For details on other software that is available for writing to DVDs or CDs, please visit the web sites of the companies whose software you are interested in, refer to their user's manuals, or look at the help option within the software. A list of various software that you can use with your Plextor drive can be found in the Support/Compatibility section of www.plextor.com. Precautions Like the rest of your computer system, your PX-740A requires reasonable care in its installation and use. · Keep the area around your drive clean from dust, smoke, and other contaminants. · Do not allow moisture or liquids, including water or cleaning fluids, to touch the drive. Thinner, benzene, or alcohol-based solvents can mar your drive's surface. · Do not drop or jolt the drive. · Do not move, carry or transport a disc in the drive because this can cause damage. 6 PX-740A Installation and Users Manual Section 1. Getting Started · Do not attempt to open the drive and service it yourself. Removing the cover may expose you to harmful electrical voltages or the laser beam. For your safety, entrust service to experienced service personnel only. · Keep your DVDs and CDs free of dirt or other contaminants, by storing them in jewel cases. Use only industry-standard discs. Do not insert dirty, warped, poorly balanced, or cracked discs into the drive. · Do not clean discs using a circular motion. Instead, using a soft, dry cloth, wipe gently in a radial motion; start at the center of the disc and proceed to the outer edge. · Do not attempt to clean your drive using solvent-based cleaners or an air compressor. · Do not attempt to clean your drive using a CD cleaning disc. These discs can damage your drive permanently. Where to Go From Here · See Section 2, beginning on page 9, to learn how to install your drive. PX-740A Installation and Users Manual 7 Section 1. Getting Started This page intentionally left blank. 8 PX-740A Installation and Users Manual 2. Installing the PX-740A Internal ATAPI Drive This section explains how to physically install your PX-740A internal ATAPI drive in your computer. PX-740A Drive Features and Controls Before proceeding, become familiar with the controls and features of your Plextor drive. Match the parts of your drive to the illustrations below. Front Panel--PX-740A Internal Drive Figure 1: Front panel of the PX-740A internal ATAPI drive · LED indicator: Illuminated green for disc reading, blinking green for writing. · Tray front door: Attached to disc tray drawer. PX-740A Installation and Users Manual 9 Section 2. Installing the PX-740A Internal ATAPI Drive · Emergency eject hole: If the automatic eject button does not work, insert the emergency eject tool, paper clip, or other thin, rigid object in this hole to eject tray. Turn OFF power before using this feature. · Eject button: Push once to eject tray. Push again to insert the tray back into the PX-740A. To prevent wear on the drive, always use the eject button to insert the tray. Rear Panel--PX-740A Internal Drive Also familiarize yourself with the drive's rear panel. Figure 2: Rear panel of the PX-740A internal ATAPI drive · Digital audio output connector: Outputs a digital stereo signal. Use this to connect to a sound board that supports Sony/Philips Digital Interface (SPDIF) or Digital-In. · Analog audio output connector: Outputs an analog stereo signal. Use this to connect to a sound board or audio amplifier. Use a standard MPC-3 type, 4-pin connector. 10 PX-740A Installation and Users Manual Section 2. Installing the PX-740A Internal ATAPI Drive · Mode jumper: Use the mode jumper to select operation as an IDE master or slave, or for cable select. In general, leave this jumper at its factory setting, which is master; and ensure that any other device on the bus is jumpered as slave. · IDE cable connector: Connects to your computer's IDE (ATAPI) interface using 80-conductor Ultra cable. NOTE: Although the PX-740A will operate with a 40-wire IDE cable, it may not be able to write DVDs at 16X unless an 80-conductor IDE/ATA cable is used. · Power connector: Connects to your computer's power supply to provide DC +5 volts and +12 volts to the PX-740A. What Else Is In the PX-740A Box What you find in your Plextor box depends on what the company that sold you the box put in--or took out--while the Plextor drive was in their possession. Plextor currently sells the PX-740A drive in this configuration: · PX-740A DVD±R DL, DVD±R/RW and CD-R/RW drive · 80-conductor IDE/ATA cable · 4 mounting screws · Extra jumper · Emergency eject tool · Plextor software disc with a PDF file of the PX-740A Installation and Users Manual. Also contains Ahead Software's Nero OEM Suite. · Drive Installation Guide PX-740A Installation and Users Manual 11 Section 2. Installing the PX-740A Internal ATAPI Drive Save Your Box! Be sure to save the box after you have installed your drive. The box and its packaging material were designed and drop tested to ensure your drive can endure rough treatment and still arrive in working order. If you have to ship your drive back to Plextor, you'll want to send it in the original box. (For more details about returning your drive to Plextor, see page 65.) If the security sticker on top of your box is cut, there may be a good reason: for example, a dealer may have added other components or software. Carefully check the contents to ensure nothing has been removed. If something is missing, contact the party from whom you purchased the box for an explanation. NOTE: This applies to the Plextor retail box. Your drive may have been shipped in a different box with other contents, depending on whom you purchased the drive from and what they included inside the box. If your drive came pre-installed, some or all of the items above may have been installed and may not be separately available. See the Plextor web site for locations to purchase additional or replacement accessories. 12 PX-740A Installation and Users Manual Section 2. Installing the PX-740A Internal ATAPI Drive PX-740A QuickStart Installation For Experienced PC Users Only If you've installed computer peripherals before, use this QuickStart installation to get up and running quickly. IMPORTANT NOTE: To ensure maximum writing speed, you must connect the PX-740A to an 80-conductor IDE/ATA flat ribbon cable. (This newer 80-conductor ribbon cable is physically interchangeable with the 40-conductor cable found in older computers.) The Plextorsupplied cable is an 80-conductor cable. Typical Scenario 1: You have a PC with an IDE interface installed, you have Windows 98SE, Me, 2000, or XP, and you have nothing installed on the secondary IDE port. What to do: Leave the PX740A's jumper set to Master, attach it to the secondary IDE port, and go. Windows will recognize the drive automatically. Typical Scenario 2: You have a PC with an IDE interface installed, you have Windows 98SE, Me, 2000, or XP, the primary IDE port already has two devices connected and you have a CD-ROM installed on the secondary IDE port. What to do: Change the CDROM to Slave, leave the PX-740A's jumper set to Master and attach the PX-740A to the secondary IDE port. Windows recognizes the new drive automatically. If neither of these situations applies to you, or you're not comfortable with IDE installation, read the rest of this section for more detailed installation instructions. PX-740A Installation and Users Manual 13 Section 2. Installing the PX-740A Internal ATAPI Drive Mount the PX-740A Drive Here's an overview of what you'll do to mount the drive: 1. Turn OFF your computer system. 2. Set the jumpers for your new PX-740A drive, if necessary. 3. Mount the drive into an available drive bay inside the computer system. 4. Make all necessary cabling connections: IDE cable, power cable, and audio cable. 5. Turn your computer system ON. The following pages give more details for this procedure. Open the Computer and Prepare for Installation To determine whether your PX-740A will be a Master or a Slave, open your computer and examine the IDE connections to the motherboard. To open the computer: 1. Before proceeding, make sure the power to your computer and any external peripherals is OFF and your computer is UNPLUGGED from its power source. 2. Remove your computer's cover, following the directions provided by your computer's manufacturer. Typically, this involves loosening or removing several screws on the back panel of your computer and sliding off the cover. See Figure 3 for an example. 14 PX-740A Installation and Users Manual