User manual PLUS U5-332

DATA PROJECTOR User's Manual ZO 2 O M 4 R E TIM / K L LIC E -C C R AN C M U TE Q K R A U TO O E Q U IC S E LA ID V IMPORTANT * DLPTM (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instruments Incorporated (U.S.A.). * VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U.S.A.). * S-VGA is a registered trademark of Video Electronics Standards Association. * Microsoft, Windows, and PowerPoint are registered trademarks of Microsoft Corporation (U.S.A. and other countries). * Macintosh is a trademark of Apple Computer Inc. (U.S.A.). Note that even in the absence of explanatory notes, serious attention is paid to the trademarks of the various companies and to the product trademarks. S TA N D B Y R G B M E N U E N TE R ZE EE FR 1 V O L 3 U5-432 / U5-332 U5-432/U5-332 SO UR CE AU TO STA ND BY STA ND BY STA TU S IMPORTANT SAFETY INFORMATION Precautions Please read this manual carefully before using your PLUS Data Projector and keep the manual handy for future reference. This manual is for both the U5-432 and U5-332. The U5-432 and U5-332 are identical in appearance, but have different B/W mode functions. Their functions are indicated on the table below. Resolution (Full Functions) Optical Zoom Black/White Type of included remote control unit Model Function mode U5-432 1024 768 (XGA) Wireless remote control unit with laU5-332 1024 768 (XGA) ser pointer (w/ PC mouse function) : Function included : Function not included CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems. The above cautions are given on the bottom of the product. WARNING TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT'S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED PLUS SERVICE PERSONNEL. WARNING This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. RF Interference WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by PLUS Vision in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. DOC Compliance Notice This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. CAUTION Do not look at the laser pointer's light source. Be sure to heed the following. Pointing the laser beam at the eyes could lead to reduced vision or vision impairment. · Never look at the laser pointer's light source. · Do not point the laser beam at people. · Do not let children use the laser pointer. This label is located on the side of the remote control. Hg: Lamp in This Product Contains Mercury. Dispose of Lamp According to Local, State or Federal Law. E-2 IMPORTANT SAFETY INFORMATION Important Safeguards These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them carefully and heed all warnings. Installation · · · · · · For best results, use the unit in a darkened room. Place the unit on a flat, level surface in a dry area away from dust and moisture. Do not place the unit in direct sunlight, near heaters or heat radiating appliances. Exposure to direct sunlight, smoke or steam can harm internal components. Handle the unit carefully. Dropping or jarring can damage internal components. Do not place heavy objects on top of the unit. Power Supply · The unit is designed to operate on a power supply of 100 ­ 120/220 ­ 240 V 50/60 Hz AC. Ensure that your power supply fits these requirements before attempting to use the unit. · Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire. · Disconnect the power cable (mains lead) from the power outlet after using the unit. Before disconnecting the power cable, make sure that the STANDBY indicator lights in amber (not blinking or in green). Cleaning · Disconnect the power cable (mains lead) from the unit. · Clean the cabinet of the unit periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner. · Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens. · Clean the ventilation slots and speaker grills on the unit periodically using a vacuum cleaner. If accumulated dust blocks the ventilation slots, the unit will overheat, which may cause the unit to malfunction. Use a soft brush attachment when using the vacuum cleaner. Do not use a hard attachment, such as a crevice tool, to prevent the damage to the unit. Lamp Replacement · Be sure to replace the lamp when the Status indicator comes on. If you continue to use the lamp after 2000 hours of usage, the lamp will turn off. Fire and Shock Precautions · Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the buildup of heat inside the unit. Allow at least 10 cm (3 inches) of space between the unit and walls. · Prevent foreign objects such as paper clips and bits of paper from falling into the unit. Do not attempt to retrieve any objects that fell into the unit. Do not insert any metal objects such as a wire or screwdriver into the unit. If something should fall into the unit, immediately disconnect the power cable from the unit and have the object removed by a qualified PLUS service person. · Do not place any liquids on top of the unit. Cautions on Handling the Storage Case · Do not put anything other than the unit or its accessories in the storage case. Paper clips, staples or other metal or foreign objects getting inside could cause fire or electric shock. · Do not swing the storage case around when the unit is inside. Also do not force objects that are too large to fit into the storage case. Doing so could scratch or damage the unit. When Moving the Unit · When moving the unit to a different place, put it in the included storage case and place the storage case in an insulating package to protect against falls and shocks. · If there are paper clips, staples or other metal or foreign objects inside the storage case, the objects could get inside the unit while the unit is being moved, causing fire or electric shock when the power is turned on. CAUTION ­ HOT! The area around the exhaust vents is hot during and immediately after image projection. To avoid burns, keep your hands away from this area. Wait until the exhaust vents area cools off before touching it. Do not look into the lens while the unit is on. Serious damage to your eyes could result. E-3 Major Features Lightweight high-intensity projector The synergy of the DLPTM (Digital Light Processing) display system and our own optical design serve to improve the optical utilization efficiency. The three primary colors (RGB) required in color expression are reproduced with one DMD (Digital Micromirror Device of high precision). These factors have enabled a design that offers both high intensity and small size/ lightweight features. Sharp, clear picture The DLPTM display system affords RGB color fidelity and inconspicuous gaps between the individual dots, thereby permitting the display of small characters and diagrams with distinct clarity. Industry's first B/W mode for switching from the color mode to an image with a stronger brightness Applicable Projector: U5-432 When projecting documents, spreadsheets or other mostly black and white data, the image can be projected with stronger brightness than in the color mode by switching to the "Color B/W Switching" in the menu settings. This function is a first for a projector, and takes advantage of the features of high contrast rate DLP projectors. Powerful functions for presentations A wide variety of easy-to-set functions have been built into the projector, from a digital keystone correction function (used when making settings) that corrects picture distortion, to an auto adjustment function that automatically identifies the PC signal. A presentation timer that supports presentations and a security lock function protecting against unauthorized projection have also been added. High contrast ratio of 2000:1 Use of a new generation of DMD devices has given birth to an amazing 2000:1 high contrast ratio. By widening the difference of brightness between black and white, you can see a degree of sharpness that is greater than just the brightness based on specifications. Beautiful reproduction of high-quality images from DVD Faithful reproduction of color tones gives rise to the display of natural images. High-quality images such as those from DVD and digital high-definition television broadcasts bring out the display capabilities that are an essential strength of the DLPTM display system projector. Econo-mode switch function for the lamp output Using the lamp Econo-mode will extend the life of the lamp and lower the power consumption. By switching the lamp mode to suit your operating environment, you will save on lamp cost as well as contribute to energy conservation and ecology. E-4 Table of Contents IMPORTANT SAFETY INFORMATION ................................................................................... E-2 Major Features ....................................................................................................................... E-4 Table of Contents ................................................................................................................... E-5 Checking the Supplied Accessories .................................................................................... E-7 Names of the Main Unit Parts ............................................................................................... E-9 Names of the Remote Control Parts/Preparing the Remote Control .............................. E-11 Names of Parts/Preparing the Remote Control Unit Included with the U5-432 and U5-332 ....................................................................... E-11 Remote Control Range ............................................................................................. E-13 The Procedure Up to Projecting to the Screen ................................................................. E-14 Placement Guide .................................................................................................................. E-15 U5-432/U5-332 Screen Size and Projection Distance .............................................. E-15 Connecting Personal Computers and Video Equipment .................................................. E-18 Connections with Personal Computer ....................................................................... E-18 Connect the projector's RGB connector using the included RGB signal cable. .. E-18 To Output the External Output Signal of a Notebook Computer ......................... E-19 Connections with Composite Signals ........................................................................ E-20 Video Equipment with VIDEO Connectors .......................................................... E-20 Video Equipment with S-VIDEO Connectors ...................................................... E-20 Connections with Component Signals ....................................................................... E-21 When the Video Equipment Has a YCbCr Connector or YPbPr Connector ........ E-21 Connections with the AUDIO Jack ............................................................................ E-22 Power Cable Connections and Switching the Power On/Off ........................................... E-23 Operating ................................................................................................................... E-23 Finishing .................................................................................................................... E-25 Adjustment of the Projection Screen ................................................................................. E-26 Adjustment of the Projection Screen ......................................................................... E-26 Making Adjustments with the Adjusters .............................................................. E-27 General Operation ................................................................................................................ E-28 Input Selection .......................................................................................................... E-28 Automatic Adjustment ............................................................................................... E-29 Freezing a Moving Picture ......................................................................................... E-30 Cancelling Video and Audio Temporarily ................................................................... E-30 Adjustment of the Volume .......................................................................................... E-31 Enlargement of the Image and Video Movement ...................................................... E-32 Using the Presentation Timer .................................................................................... E-33 Using the Laser Pointer ............................................................................................. E-34 Performing Mouse Operations on the Computer with the Remote Control Unit .................................................................................... E-35 Controlling the Projector from a Computer ................................................................ E-36 Use as a High-Brightness Monochrome Projector .................................................... E-36 Protecting the Projector with the Security Lock ......................................................... E-37 Using the Quick Menu ............................................................................................... E-39 Menu Operation Method ...................................................................................................... E-40 Performing Menu Operations .................................................................................... E-42 List of Item Names Offering Input Selection and Adjustments/Settings .................... E-45 Image ..................................................................................................................................... E-47 Brightness / Contrast / Color / Tint / Sharpness ........................................................ E-47 Picture Adj. / Fine Picture / H Position / V Position .................................................... E-47 Reset ......................................................................................................................... E-48 E-5 Table of Contents Color ...................................................................................................................................... Quick Color Adj. ........................................................................................................ Gamma ..................................................................................................................... Color Temp. ............................................................................................................... White ......................................................................................................................... Color Space .............................................................................................................. White Balance ........................................................................................................... View ....................................................................................................................................... Aspect ....................................................................................................................... Filter .......................................................................................................................... Vertical Flip / Horizontal Flip ...................................................................................... Keystone .................................................................................................................... Keystone Save .......................................................................................................... Setup ..................................................................................................................................... Color B/W Switching ................................................................................................. Auto Source ............................................................................................................... Auto Power Off .......................................................................................................... Menu Position ............................................................................................................ Lamp Mode ............................................................................................................... Input Format .............................................................................................................. Presentation Timer .................................................................................................... Option ................................................................................................................................... Language .................................................................................................................. On Screen ................................................................................................................. Background ............................................................................................................... Startup Screen .......................................................................................................... Security Lock ............................................................................................................. Info. ........................................................................................................................................ Status ........................................................................................................................ Factory Default .......................................................................................................... Lamp Timer Reset ..................................................................................................... Resolution / Frequency ............................................................................................. Lamp Timer ............................................................................................................... When an Indicator is Lit or Flashing .................................................................................. Troubleshooting ................................................................................................................... Cleaning ................................................................................................................................ Replacing the Lamp Cartridge ............................................................................................ Specifications ....................................................................................................................... Table of Supported Frequency ........................................................................................... Cabinet Dimensions ............................................................................................................ E-49 E-49 E-49 E-50 E-50 E-50 E-51 E-52 E-52 E-52 E-53 E-53 E-53 E-54 E-54 E-54 E-54 E-55 E-55 E-56 E-56 E-57 E-57 E-57 E-57 E-58 E-58 E-59 E-59 E-59 E-59 E-60 E-60 E-61 E-62 E-63 E-64 E-67 E-68 E-69 E-6 Checking the Supplied Accessories Remove the main unit and the accessories from the box and check that the following items are included. Wireless remote control unit with laser pointer [1] / Size AAA batteries [2] This controls the projector. (See Page E-11.) S-Video cable (Mini DIN 4-pin plug, 2 m / 6.6 feet) [1] This cable is used in the connection of video equipment that has an S-video connector. Connections are described on Page E-20. No. 777704000 M O ZO 2 4 R M / K L LIC E -C C R AN C TI TE U M Q K IC U R A TO U O E Q LA E ID RGB signal cable (Mini D-sub 15-pin, 2 m / 6.6 feet) [1] This is used in making connections with a personal computer. See Page E-18 about connections. No. 777709000 S TA B D N Y G R B E M V U N S E TE N R FR EE ZE 1 L O V E 3 Video cable (RCA pin plug, 2 m / 6.6 feet) [1] This cable is used in the connection of video equipment that has a video connector. Connections are described on Page E20. No. 777703000 Audio cable (Mini plug, 2 m / 6.6 feet) [1] This cable is used with equipment that has phono type audio jacks. Connections are described on Page E-22. No. 777705000 Audio conversion cable (Mini-jack/ RCA pin plug, 15 cm / 0.5 feet) [1] This cable is used with equipment whose audio connector is of the phono pin type. Connections are described on Page E22. No. 777706000 Power cable (1.8 m / 5.9 feet) [1] This power cable supplies power to the unit. See Page E-23 about connections. USB cable (type A, 2 m / 6.6 feet) [1] Used to perform mouse operations on a computer using the projector's remote control unit. Connections are described on Page E-35. No. 777707000 E-7 Checking the Supplied Accessories Storage case (for projector and accessories) [1] This case is designed to hold the projector itself and its accessories. Use it when storing the projector. HOW TO PUT THE PROJECTOR INTO THE STORAGE CASE Close the lens shutter or lens cap before putting the projector in its case, then fasten the projector in place with the Velcro belt. Place the accessories in the storage pocket. Velcro strap Pocket Y DB US AT ST AN ST Y DB AN ST TO AU CE UR SO Cable storage pouch [1] User's Manual (CD-ROM Edition) [1] User's Manual (Simplified Edition) [1] "WARNING" Handling the cables supplied with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. E-8 Names of the Main Unit Parts Zoom ring [E-26] Focus ring [E-27] Exhaust vents Ventilation slots Remote control sensor [E-13] Lens Adjuster button [E-27] (Also on opposite side) Lens cap Remove before use. Attach the lens cap after use to protect the lens. S TA TU S S TA N D B Y S TA N D B Y A U TO Ventilation slots S O U R C E Lamp cover [E-65] Adjusters [E-27] E-9 Names of the Main Unit Parts STATUS indicator [E-23, 61] STANDBY indicator [E-23, 61] STANDBY button [E-23] AUTO button [E-28] STATUS STANDBY STANDBY AUTO SOURCE button [E-28] SOURCE Remote control sensor [E-13] S TA TU S Y B D N TA S S TA N D B Y A U TO S O R G B S V ID E U R C E AC IN connector [E-23] Ventilation slots MOUSE connector [E-35] AUDIO connector [E-22] O Speaker Built-in security slot (See description below.) V ID E O A U D IO M O U S E PC CO NT RO L RGB S VIDEO VIDEO AUDIO MOUSE PC CONTROL VIDEO connector [E-20] S-VIDEO connector [E-20] RGB connector [E-18, 21] PC CONTROL connector (D-Sub 9-pin) [E-36] Built-in Security Slot This security slot supports the MicroSaver Security System manufactured by Kensington Microware Inc. E-10 Names of the Remote Control Parts/Preparing the Remote Control Refer to the description (and diagram) for the remote control unit included with your projector. Names of Parts/Preparing the Remote Control Unit Included with the U5-432 and U5-332 Names of the Remote Control Parts Infrared transmitter [E-13] Laser transmitter [E-34] L-CLICK button [E-35] STANDBY button [E-23, 25] This button is used to switch ON the power aand set the unit to the STANDBY mode. LASER button [E-34] (Turns the laser point on and off) STANDBY LASER RGB VIDEO AUTO Buttons used for input selection [E-28] RGB button and VIDEO button (VIDEO / S-VIDEO) AUTO button [E-28] (Automatic adjustment of the RGB moving image) QUICK button [E-39] (Displays a simplified menu) Buttons used for the PC mouse function [E-35] (JOG button and R-CLICK button) MENU QUICK Q Buttons used for menu operations [E-40] The , , and buttons are the select ( , , and ) buttons. ENTER R-CLICK/ CANCEL FREEZE MUTE TIMER FREEZE button [E-30] (Freezes moving pictures) TIMER button [E-33] (Presentation timer time setting display) MUTE button [E-30] (Temporarily cancels the video and audio) ZOOM button [E-32] (Digital zoom adjustment) 1 VOL button [E-31] (Volume adjustment) Number buttons [E-37] (Used for the security lock.) VOL 2 ZOOM 3 4 Note: If a button on the remote control unit is held in continuously for approximately 30 seconds, signal transfer will be suspended. To resume transferring signals, press the button again. Also, to use the jog button after signal transfer has been suspended, first press any other button, then press the jog button. E-11 Names of the Remote Control Parts/Preparing the Remote Control Inserting the Batteries When using the remote control for the first time, install the batteries that were supplied. cover the batteries to match the 1 Slide the battery compartmentand pull(located on the 2 Insert inside the compartment. "+" and "­" as indibottom of the remote control) off. cated close the lid, 3 (A) Leaving a little space in the front,(C) press the (B) then with the back pressed tightly, lid towards the front. (A) (C) (B) * When replacing batteries, purchase two of the same type of AAA battery. * DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. E-12 Names of the Remote Control Parts/Preparing the Remote Control Remote Control Range Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit and operate. Reception of the remote control signal should generally be possible within the range illustrated below. Side View 30° 20° 20° 6m/19.7feet Remote control infrared transmitter 30° Remote control sensor 5m/16.4feet Top View 3m / 8 9. fe et 30° 30° STATUS STANDBY STANDBY SOURCE AUTO Remote control sensor Remote control infrared transmitter 5m/16.4feet Precautions Handling of the Remote Control * Exposure of the main unit's remote control sensor or the remote control infrared transmitter to bright light or the obstruction of the signal by an obstacle located in the pathway may prevent operation. * Do not drop the remote control or handle it inappropriately. * Do not expose the remote control to water or other liquids. Should the remote control become wet, wipe it dry immediately. * Try to avoid use in hot and/or humid locations. * Please keep button batteries out of the reach of children. If a battery is swallowed, promptly obtain the medical care of a doctor. * Remove the batteries from the remote control when it is not going to be used for a long period. * Some operations (such as menu operations) are available only through the use of the remote control and attention should be given to its careful handling. E-13 The Procedure Up to Projecting to the Screen Perform setup adjustments in the following order. 1 Position the projector Determine the locations to set up the screen and the projector. See "Placement Guide" on Page E-15. 2 Connect the video equipment and personal computer Connect your equipment to the projector. When making connections with the personal computer's RGB connector, see "Connections with Personal Computer" on Page E-18. When making connections with the video equipment's video connector or an S-video connector, see "Connections with Composite Signals" on Page E-20. When making connections with the video equipment's YCbCr connector or YPbPr connector, see "Connections with Component Signals" on Page E-21. When playing the audio through the built-in speaker of the projector, see "Connections with the AUDIO Jack" on Page E-22. 3 Opening the lens cap 4 Connecting the power cable and switching on the power See "Operating" on Page E-23. See "Finishing" on Page E-25. 5 When selecting the language of menu displays, etc. (Only when the power is first switched on following purchase) See "When [Menu Language Select] Is Displayed Upon Switching On the Power" on Page E-24. 6 Switching on the power of the personal computer and video equipment 7 Properly adjust the projection image to the screen See "Adjustment of the Projection Screen" on Page E-26. 8 Selecting input equipment See "Input Selection" on Page E-28. 9 Adjust the screen or video image Adjust the image to the optimum condition as required. See the Table of Contents for the adjustment items. About DLP projectors Though careful attention is paid to providing optimum quality, please note that with DLP type projectors, in rare cases there may be black spots or bright spots among the picture elements. Note: * Please purchase a screen. * A component cable (order code 28-690), which is available separately, is required to connect a DVD player or other equipment with YCbCr connectors. * A component cable (order code 28-690), which is available separately, is required to connect high definition (HD) video equipment or other equipment with YPbPr connectors. E-14 Placement Guide · Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or to find out the approximate size of a screen that will be required. · Refer to the projection distance table for your projector model. · When suspending the projector from the ceiling, change the projection method. See "Vertical Flip" on E-53. U5-432/U5-332 Screen Size and Projection Distance · The projection distance over which focussing is adjustable is 1.20 m (3.94 feet) to 13.81 m (45.31 feet). The projector should be placed within this range. Screen Size Designation (Inches) 300 " Height from center of lens to top edge of the projection 250 " 200 " h1 150 120 40" 33" 27" 60" 100 80" " " " Height from center of lens to bottom edge of the projection h2 PC CONTROL Lens surface of the main unit 1 (3 .20 .9 4) 1 (4. .23­ 04 1.4 1 ­4 8 (4 .49 .86) .8 ­ 9­ 1. 58 2. .91 0 (7 26 ) .4 ­ 1­ 2. 3. 03 8. 73 96 ­3 .6 ) 5( 3. 9. 80 94 ­4 ­1 .5 1. 7( 98 12 ) 4. .4 57 7­ ­5 14 .5 .9 0( 9) 14 .9 9­ 5. 73 18 ­6 .0 4) .8 8( 18 .8 0­ 22 .5 7. 7) 65 ­9 .1 9( 25 .1 0­ 30 .1 9. 5) 57 ­1 1. 50 (3 1. 40 ­3 11 7. 73 .5 0­ ) 13 .8 1( 37 .7 3­ 45 .3 Unit: m (feet) E-15 1) STATU S STAND BY STAND BY AUTO SOUR RGB S VIDEO VIDEO AUDIO MOUS E CE Placement Guide Width Screen size (Diagonal) Height Screen Size Designation (Inches) Screen Size Width x Height (m) (feet) Projection Distance (m) (feet) Wide ­ Tele Wide ­ Tele Height h1 (m) (feet) Height h2 (m) (feet) 1.57 0.07 0.23 27" 0.56 0.41 -- ­ 1.20 -- ­ 3.94 0.48 1.83 1.35 1.94 0.09 0.30 33" 0.67 0.50 1.23 ­ 1.48 4.04 ­ 4.86 0.59 2.19 1.64 2.36 0.11 0.36 40" 0.81 0.61 1.49 ­ 1.80 4.89 ­ 5.91 0.72 2.65 2.00 3.51 0.16 0.52 60" 1.21 0.91 2.26 ­ 2.73 7.41 ­ 8.96 1.07 3.96 2.98 4.69 0.22 0.72 80" 1.62 1.21 3.03 ­ 3.65 9.94 ­ 11.98 1.43 5.31 3.96 5.87 0.27 0.89 100" 2.03 1.52 3.80 ­ 4.57 12.47 ­ 14.99 1.79 6.66 4.98 7.02 0.32 1.05 120" 2.43 1.82 4.57 ­ 5.50 14.99 ­ 18.04 2.14 7.97 5.97 8.79 0.40 1.31 150" 3.04 2.28 5.73 ­ 6.88 18.80 ­ 22.57 2.68 9.97 7.48 1.77 200" 4.06 3.04 7.65 ­ 9.19 25.10 ­ 30.15 3.58 11.75 0.54 13.32 9.97 2.20 250" 5.08 3.81 9.57 ­ 11.50 31.40 ­ 37.73 4.48 14.70 0.67 16.66 12.50 2.66 300" 6.09 4.57 19.98 14.99 11.50 ­ 13.81 37.73 ­ 45.31 5.38 17.65 0.81 * There is a tolerance of ±5% due to design values. * This table uses the lens apex and lens center as references and requires that the projector be in a horizontal condition (with front and rear adjusters fully withdrawn). E-16 Placement Guide Installation Height of Projection Screen [Reference] Once the installation location and position have been decided, the projection height should be checked. In the case of large screen sizes, there are instances where the image cannot be projected within the floor to ceiling height. The required installation height can be found using the following formula: [Height from center of lens to top edge of the projection] m (feet) + 0.05m (0.16 feet) + Stand height Example: Using a 150" 4:3 screen and placing the projector horizontally, the required installation height will be 2.68m (8.79 feet) + 0.05m (0.16 feet) = 2.73m (8.95 feet) (without a stand) An installation room with a height of 2.4m (7.87 feet) will have insufficient room height even when the projector is placed on the floor. (Note that the rear adjusters can be raised to lower the projection screen image.) Lens center Screen size vertical dimension h2 dimension Approx. 0.05 m (0.16 feet) Stand dimension Screen size top edge dimension measured from floor E-17 Connecting Personal Computers and Video Equipment Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equipment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home theater. Connections with Personal Computer Please check the following before making connections with the personal computer. · A suitable resolution for the U5-432/U5-332 is 1024 768 dots (XGA) and the maximum displayable resolution is 1280 1024 dots (S-XGA). Make changes to a displayable resolution at the personal computer side. Please check with "Table of Supported Frequency" on Page E-68. · The setting method for the personal computer will differ depending on the specific model. Please read the personal computer instruction manual or the on-line help information, or contact the manufacturer of your personal computer. Connect the projector's RGB connector using the included RGB signal cable. · · When making connections with the RGB connector of the projector, please make the connection via the supplied RGB signal cable. The projector has been set to "Auto" at the factory; however, if it does not project, please change the input setting to "RGB" using the menu sequence of [Setup] [Input Format] [RGB]. See "Input Format" on Page E-56. If the USB cable is connected to the projector's MOUSE connector, mouse operations can be performed on the computer from the projector's remote control unit. See "Performing Mouse Operations on the Computer with the Remote Control Unit" on Page E-35. · MONITOR OUT Personal computer RGB signal cable (Supplied item) Note: * Before making connections, check the power of the projector and the equipment to be connected is switched off. * When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows startup. Please consult the instruction manual of your notebook computer or the online help. E-18 Connecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your notebook computer or the on-line help while performing the following procedure. sent from the notebook computer to the projector. 1 Check whether a signal is beingliquid crystal display of the notebook computer does not necessarily mean that an external An indication appearing on the output signal is being output. REFERENCE: When "Resolution" or "Frequency" is not displayed under "Info." on the menu of the projector, this means that the external output signal is not being output from the personal computer. See "Resolution/Frequency" on Page E-60. a sign not try below. 2 ShouldIBM PC/ATbe output from the notebook computer, pleaseany the operation described keys. (See the table below.) For an compatible computer, press the [Fn] key plus one of the [F1] to [F10] Manufacturer Model Key DELL All computers Fn + F8 EPSON All computers Fn + F8 FUJITSU All computers Fn + F10 iiyama All computers Fn + F3 IBM All computers Fn + F7 NEC All computers Fn + F3 Panasonic All computers Fn + F3 SHARP All computers Fn + F5 SONY All computers Fn + F7 SOTEC All computers Fn + F3­F5 TOSHIBA All computers Fn + F5 Victor All computers Fn + F10 Note: Table information is current to December 2003. Note: When the liquid crystal display of the notebook computer and the projector are displayed at the same time, the projected image might not be correct even though the liquid crystal display shows a correct indication. Should this occur, stop the simultaneous display of the notebook computer and try the mode with external output only. Try an operation such as that described in aforementioned Step 2 and try closing the liquid crystal panel which might result in external output only. E-19 Connecting Personal Computers and Video Equipment Connections with Composite Signals Video Equipment with VIDEO Connectors · Make the connection to the VIDEO connector of the projector using the supplied Video cable. · The input setting of the VIDEO connector has been set to "Auto" at the factory; however, if the projector does not project, please change the input setting to "Your Country's Television Broadcast System" using the menu sequence of [Setup] [Input Format] [Video]. See "Input Format" on Page E-56. Video Equipment with S-VIDEO Connectors · Make the connection to the S-VIDEO connector of the projector using the supplied S-video cable. · The input setting of the S-VIDEO connector has been set to "Auto" at the factory; however, if the projector does not project, please change the input setting to "Your Country's Television Broadcast System" using the menu sequence of [Setup] [Input format] [S-Video]. See "Input Format" on Page E-56. Video deck, DVD player, document camera, etc. VIDEO S-VIDEO Video cable (Supplied item) S-Video cable (Suppled item) E-20 Connecting Personal Computers and Video Equipment Connections with Component Signals When the Video Equipment Has a YCbCr Connector or YPbPr Connector · The projector has been set to "Auto" at the factory; however, if it does not project, please change the input setting to "Component" using the menu sequence of [Setup] [Input Format] [RGB]. See "Input Format" on Page E-56. · When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or another color, change the setting under the menu of [Color] [Color Space]. See "Color Space" on Page E-50. Component cable (Available as an option) Order code: 28-690 Green Blue Red Y Cb Cr COMPONENT COMPONENT Y Pb Pr Green Blue Red Component cable (Available as an option) Order code: 28-690 E-21 Connecting Personal Computers and Video Equipment Connections with the AUDIO Jack * Make the connection to the projector's AUDIO jack using the supplied audio cable. When the audio jack of the equipment that is to be connected is of the RCA phono type, make connection via the supplied audio conversion cable. * The built-in speaker of the projector provides monaural audio. To enjoy convincing audio reproduction, please connect the audio output of the video equipment to your audio system. * The built-in speaker outputs the audio of the equipment connected to the AUDIO jack. White Audio cable (Supplied item) AUDIO OUT L