Questions? Need Help? Contact Polaroid Customer Care Center Toll Free at: 1-800-343-5000 8am - 6 pm EST Mon - Fri (USA only) 3 2 Lighten/Darken Control Taking Photos 4 1 Loading Film Close-up Lens (Not on AF model cameras) 5 This camera uses Polaroid 600 series film. Each pack of film contains 10 photos. Flash Override Button (Not on AF model cameras) AF Model Cameras: 636 AF OneStep AF OneStep AF SE 600 AF Snap the camera shut when not in use. Non-AF Model Cameras: 637 OneStep OneStep Express 600 Extreme 600 CL Cool Cam JobPro 2 600 Business Edition 2 1 Loading Film 2 Taking a Photo a 4 ft ­ 1.2m ­ 2 ­ 4 ft .6 ­ 1.2m a Pull up the flash unit and snap it into place. a 4 ft ­ 1.2m ­ a Position your subject(s) 4-8 feet from the camera (normal lens setting). Frame your subject(s) in the viewfinder. b Open the film door. b b Hold the camera still and press the shutter button. c Insert the film pack as shown. Hold the film pack by the edges. Push the film pack in until a "click" is heard. b c c The photo automatically ejects. c d Close the film door. d 3 Lighten/Darken Control Use this feature to retake a photo that was too light or too dark. Always return the control to the normal position after using. e The camera ejects the paper film cover. e f Check the picture counter on the back of the camera. The number inside the window shows you how many photos are left in a film pack. A new pack of film contains 10 photos. To lighten a photo that is too dark, slide the lighten/ darken control to the right. Retake the photo. 10 f To darken a photo that is too light, slide the lighten/ darken control to the left. Retake the photo. 4 Close-up Lens a 4 ft ­ 1.2m ­ (Not on AF model cameras) Developing Photos Developing photos are fragile. 2 ­ 4 ft .6 ­ 1.2m a To take a close-up photo, slide the close-up lens lever to the right. Do not shake Do not bend b 55 F 13 C 2 ­ 4 ft .6 ­ 1.2m b Position your subject 2 - 4 feet from the camera. Frame your subject in the oval area of the viewfinder. Press the shutter button. If the temperature is below 55 F (13 C) place the developing photo in a warm location, such as your pocket. Camera Maintenance 5 Flash Override Button (Not on AF model cameras) The flash override button allows you to take a photo without the flash. Use this feature when shooting metallic or shiny surfaces, or when shooting a subject through glass. Do not touch the camera lens. Clean the camera lens with a soft, lint-free cloth. Flash Override Button If spots or banding appears on photos, the camera may have dirty developer rollers. a a Frame your subject. Hold the camera still and press the flash override button. To clean the developer rollers, dampen a clean cloth with tap water. Open the film door and thoroughly clean the rollers. If film is in the camera, clean the rollers in a dimly-lit area. b b The photo automatically ejects.