User manual POLAROID XSA-00660S

Digital Photo Picture Frame XSA-00660S User's Manual Questions? Need some help? This manual should help you understand your new product. If you have questions, call our toll-free number found on the insert with this icon: Or visit www.polaroid.com. 20070731 Important Safety Instructions CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Note: Do not touch the color TFT LCD screen by hand directly. Proper Handling of the Digital Photo Picture Frame Always handle the Digital Photo Picture Frame carefully. Avoid touching the LCD screen as natural skin oils are very difficult to remove. Always position the Digital Photo Picture Frame on a stable and level surface. Unstable surfaces can cause the Digital Photo Picture Frame to topple and fall, resulting in possible damage or injury. Avoid exposing the Digital Photo Picture Frame to direct sunlight or high temperatures, which can damage or shorten its life. Do not place the unit near heat sources such as radiators, heat registers, or other appliances that generate heat. Orient the Digital Picture Frame away from direct sunlight to reduce glare. Avoid exposing the Digital Photo Picture Frame to rain, water, moisture or high humidity. Do not place it in a bathroom or kitchen near a sink or where it may come in contact with water. Never place heavy or sharp objects on the LCD panel, frame, or power cord. Overloading Outlets Do not overload electrical power sources when using the Digital Picture Frame. Overloading wall outlets, circuits, or extension cords can result in overheating, fire, or electric shock. Use only grounded or polarized outlets. Power Cord Protection To minimize wear on the power supply cord, the power supply cord should be routed away from foot traffic and contact with other objects. Do not route the power cord under rugs or carpeting. The cord should never be severely bent, pinched, or twisted. Periodically inspect the power cord and each end of the cord for wear or damage. Unplug and replace the cord if it is damaged. Ventilation Slots and openings on the Digital Photo Picture Frame are provided for ventilation purposes. To ensure proper ventilation and reliable operation of the product do not place Digital Photo Picture Frame on a bed, sofa, rug or similar surface. Do not place it in an enclosed space such as a bookcase, unless proper ventilation is provided. 2 Controls and Basic Instructions CONGRATULATIONS on your purchase of a Polaroid digital photo frame. Please read carefully and follow all instructions in the manual and those marked on the product before first use. Failing to follow these warnings could result in personal injury or damage to the device. Also, remember to keep this User's Manual in a convenient location for future reference. Important: Save the original box and all packing material for future shipping needs. Controls Secure DigitalTM, Multi Media CardTM Memory StickTM, Memory Stick Pro DuoTM Up Play Down Exit USB port for USB flash drives AC Power Input Brightness Control Control Buttons Power Switch Adjustable Base Set Up and Navigation Quick Start Quick Start Instructions 1. Plug the AC adapter into the Digital Photo Picture Frame and plug it into a wall outlet. 2. Insert a memory card into the slot or inset peripheral USB equipment into USB host: Memory Card Slot: Secure DigitalTM, MultiMedia CardTM, Memory StickTM, Memory Stick DuoTM 3. Turn on the Power Switch on the back of the Digital Photo Picture Frame. 4. Once the Digital Photo Picture Frame has been turned on, the unit will enter the "Select Card" page automatically. 5. Press the >> or << button to select one type of memory cards and press the Play (II) button to enter "Select Mode" page. 6. Press the >> or << button to select one mode and press the Play (II) button to enter. 7. Or press the EXIT button to back to the "Select Card" page. 8. Follow step 6, press the >> or << button to select one picture and press the Play (II) button to view it in full screen. Then press the >> button to next picture or press the << button to previous picture. Press the EXIT button to exit. 9. When viewing a picture, press the Play (II) button again to enlarge the current picture. Under zoom in state, press the >> button to move to the right side of the picture and press the << button to move to the left side. Press the EXIT button to zoom out the picture to original size. 10. Press the EXIT button for one second to access the on screen display (OSD). Press the >> or << button to choose one item and press the Play (II) button to enter. Press the >> or << button to choose one option and press the Play (II) button to confirm your choice. Press the EXIT button to exit the OSD. Controls and Basic Instructions Control Button Functions All function settings for the Digital Photo Picture Frame can be controlled via the buttons located on the top of the frame. You will be able to access the on screen display (OSD) at any time, except when in Slide Show Mode, by simply holding down the "EXIT" button for one second or press remote control setup button. OSD Menus Mosaic View Image Size Slide Show Effect Sub-Menus On Off Original Optimal Off Fade Shutter Cross Comb Mask Brick Dissolve Bar Random Fast Normal Slow On Off --Are you sure? yes/no English Italian German French Spanish Portuguese Dutch Off 30 Seconds 60 Seconds 5 Minutes 15 Minutes Description Watch four pictures at a time in a slide show Display images in original aspect ratio Optimize images to fill entire space Select style of transition Slide Show Speed Speed of slide show Slide Show Shuffle Rotate Set Favorite Reset Settings Language Picture display order is random in slide show mode Rotate the selected picture by 90 degrees clockwise Set favorite pictures as Slide Show Restore settings to default values Multiple languages Auto Slide Set The slide show will automatically start after the time is selected. Note: If a card is inserted into the Digital Picture Frame, selecting "Start Slide Show" will run a Slide Show of images contained in the memory card. If you select some favorite pictures through "Set Favorite" option, the Slide Show will display your favorite pictures. ControlsUp and Navigation Set and Basic Instructions Control Button Functions - continued OSD Functions Note: To enter the OSD, hold the EXIT button down for one second. To exit, simply press the EXIT button. Note: The OK button has two functions: 1:Press it just for a second to confirm your choice 2: Press and hold it down for a longer time to enter the slide show mode. Button Command << Up / II Select >> Down EXIT Exit OSD Menu Viewing Pictures Individually Button Command << Previous Picture / II Zoom in the Select Picture >> Next Picture EXIT Press once to zoom out the picture to original size or hold down for one second to enter OSD Menu Select Mode Page / Select Card Page Button << / II >> EXIT Command Left Select Right Back to "Select Card" Page Demo Slide Show Some demo pictures have been loaded into the digital picture frame. These pictures can be viewed without inserting any memory cards. Power on the digital picture frame, wait a few seconds, the demo slide show will run automatically. Connecting a USB Device to the Digital Picture Frame Your Digital Picture Frame has a built-in USB port. Using a USB cable (not included) and your digital camera or a USB flash drive, you have the ability to view images directly from the USB source. 1. Connect the AC adapter to the Digital Picture Frame and slide the power switch to the "on" position. 2. Connect one end of a USB cord to a USB device such as a digital camera or USB flash drive, and the other end to the Digital Frame. 3. Once the Digital Photo Frame has recognized the USB source, you will be able to view all the pictures on the camera's internal memory, its memory card, or a USB flash drive. Frequently Asked Questions Frequently Asked Questions (FAQ) Q: What other media formats can the Digital Photo Picture Frame support? Why will it not play all images? A: The Digital Photo Picture Frame will support JPEGs taken from a digital camera. The Digital Photo Picture Frame may not read all images. Q: I have a memory card in the Digital Picture Frame, but it's not reading the card. What should I do? A: First, make sure that you are using a memory card that is supported by the Digital Picture Frame. Second, ensure the memory card is inserted all the way into the correct slot. Third, press the EXIT button until you reach the "Select Card" page. If the memory card is properly inserted into the slot, the memory card icon will be highlighted. Note: Some digital cameras save images into non-standard formats. Please refer to your camera's operating manual for specifics. Q: Why do some pictures load faster than others? A: Higher resolution pictures load slower. Using a lower resolution when taking pictures speeds loading time. Technical Specifications and Recycling Set Up and Navigation Technical Specifications Product: 7" LCD Screen Digital Photo Picture Frame Resolution: 480 x 234 pixels Input Formats: Secure DigitalTM, Multi Media CardTM, Memory StickTM, Memory Stick Pro DuoTM FCC Disclaimer The outdoor remote temperature sensor complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Questions? Need some help? Call our toll-free number found on the insert with this icon: Or visit www.polaroid.com. WEEE: This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. To find out how to properly dispose of this product, please go to www.polaroid.com and click on "Company" or call the customer service number for your country listed in the instruction manual. "Polaroid" and "Polaroid and Pixel" are trademarks of Polaroid Corporation. For service, support and warranty information, visit www.polaroid.com.