User manual POLYCOM VSX7000

Getting Started Guide for the VSX Series Version 8.5 May 2006 Edition 3725-21286-008/A GETTING STARTED GUIDE FOR THE VSX SERIES Trademark Information Polycom®, the Polycom logo design, and ViewStation® are registered trademarks of Polycom, Inc., and ImageShareTM, PathNavigatorTM, People+ContentTM, PowerCamTM, QSXTM, SoundStation VTX 1000TM, StereoSurroundTM, Visual ConcertTM, VS4000TM, and VSXTM are trademarks of Polycom, Inc. in the United States and various other countries. All other trademarks are the property of their respective owners. Patent Information The accompanying product is protected by one or more U.S. and foreign patents and/or pending patent applications held by Polycom, Inc. © 2006 Polycom, Inc. All rights reserved. Polycom Inc. 4750 Willow Road Pleasanton, CA 94588-2708 USA No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Polycom, Inc. Under the law, reproducing includes translating into another language or format. As between the parties, Polycom, Inc. retains title to, and ownership of, all proprietary rights with respect to the software contained within its products. The software is protected by United States copyright laws and international treaty provision. Therefore, you must treat the software like any other copyrighted material (e.g. a book or sound recording). Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc. is not responsible for printing or clerical errors. Information in this document is subject to change without notice. ii WWW.POLYCOM.COM/VIDEODOCUMENTATION Contents System Basics ...................................................................................... 1 Using the Remote Control ..................................................................................................... 1 Getting More Information ...................................................................................................... 3 Calling and Answering.......................................................................... 3 Answering a Video Call ......................................................................................................... 3 Placing a Video Call .............................................................................................................. 3 Ending a Video Call .............................................................................................................. 5 Types of Video Calls You Can Make ......................................................................................... 6 Placing Audio-only Calls and Adding Audio-only Sites ................................................................ 7 Ending an Audio-only Call ..................................................................................................... 8 Controlling What You See..................................................................... 8 Selecting and Adjusting a Camera or Other Video Source........................................................... 8 Setting and Using Camera Presets .........................................................................................10 Switching Between Full Screen Video and the Home Screen ......................................................12 Showing, Moving, and Turning Off the PIP ..............................................................................12 Enabling Automatic Camera Tracking (PowerCam Plus Only) .....................................................14 Controlling What You Hear ................................................................. 15 Adjusting Volume................................................................................................................15 Muting the Microphone ........................................................................................................15 Enjoying Stereo Audio in Video Calls ......................................................................................15 Showing Content and Video Sources .................................................. 16 Showing Content from a Computer ........................................................................................16 Using a Document Camera, VCR, or DVD Player ......................................................................19 Working with Directory Entries .......................................................... 20 Searching the Directory .......................................................................................................20 Adding, Editing, and Deleting Directory Entries........................................................................20 Categorizing Directory Entries...............................................................................................22 Refreshing Global Directory Entries........................................................................................23 Including Multiple Sites in Calls ......................................................... 24 About Multipoint Calls ..........................................................................................................24 Placing a Multipoint Call .......................................................................................................25 Supplying a Password for External MCU Calls ..........................................................................26 About Multipoint Viewing Modes ............................................................................................27 Controlling How the System Answers Multipoint Calls ...............................................................28 Using Chair Control for Multipoint Calls...................................................................................28 Changing the Way Calls Are Answered ............................................... 30 Temporarily Refusing Calls ...................................................................................................30 Answering Calls Automatically...............................................................................................30 Muting Automatically Answered Calls .....................................................................................31 © POLYCOM, INC. iii GETTING STARTED GUIDE FOR THE VSX SERIES Scheduling Calls ................................................................................. 32 Using the SoundStation VTX 1000 Conference Phone in Video Calls... 33 Placing a Video Call with the SoundStation VTX 1000 Conference Phone .....................................33 Adding Sites to a Video Call Using the SoundStation VTX 1000 Conference Phone ........................33 Muting the Audio in a Call that Includes a SoundStation VTX Conference Phone ...........................34 Adding Video to a SoundStation VTX 1000 Conference Phone Audio-only Call ..............................34 Ending a Call ......................................................................................................................35 Ending a Call with Audio-only Participants...............................................................................35 Using Avaya Network Features with Video Calls................................. 36 Using Microsoft LCS Features with Video Calls ................................... 37 Adding and Removing Microsoft LCS Contacts .........................................................................37 Viewing Microsoft LCS Contact Status ....................................................................................38 Streaming a Conference to the Web ................................................... 38 Starting a Stream ...............................................................................................................38 Viewing a Stream................................................................................................................39 Customizing Your Workspace ............................................................. 40 Allowing the Far Site to Control Your Camera ..........................................................................40 Specifying When to Display the PIP........................................................................................40 Displaying the Far Site's Name When the Call Connects ............................................................41 Hearing Audio Confirmation When You Dial .............................................................................42 Adjusting for Room Lighting .................................................................................................42 Setting Camera Brightness (VSX 3000 Only) ...........................................................................43 Changing the System Color Scheme ......................................................................................43 Enabling Dual Monitor Emulation ...........................................................................................44 Using Your VSX 3000 System as a Computer Monitor......................... 45 Video Conferencing Tips ..................................................................... 46 Tips Tips Tips Tips for for for for Great Meetings........................................................................................................46 Great Video ............................................................................................................46 Great Audio ............................................................................................................47 Showing Content .....................................................................................................47 iv WWW.POLYCOM.COM/VIDEODOCUMENTATION Getting Started Guide for the VSX Series When you attend a meeting using the Polycom® VSXTM system, you'll see that it's very much like any other meeting you attend in a conference room. With a VSX system, you can meet with people anywhere in the world, without any travel required. You can also share information in calls using content sharing software, document cameras, VCRs, or DVDs. This guide includes overview information that you may find helpful when you're just starting to learn about video conferencing or when you have experience, but you need a quick refresher. VSX systems can be customized to show only those options used in your organization. Therefore, there may be options covered in this guide that you cannot access on your system. To find out more about these options, please talk to the administrator of your VSX system. This guide covers instructions for the following models. VSX set-top systems VSX component systems VSX 3000 executive desktop system System Basics Using the Remote Control You use the remote control to place calls, adjust the volume, navigate screens, and select options. If you need to enter text, you can press number buttons, using the text-entry method commonly used with cell phones. For example, to enter a "b", press the number 2 button twice. Alternatively, you can press use the on-screen keyboard to enter text. Keyboard and © POLYCOM, INC. 1 GETTING STARTED GUIDE FOR THE VSX SERIES VSX Series Remote Control Place or answer a call Adjust the camera; navigate through menus Return to the Place a Call (home) screen Increase or decrease the sound you hear from the far sites Mute the sound you're sending to the far sites Zoom the camera in or out Turn automatic camera tracking on or off Select a camera or other video source Display the onscreen keyboard so you can enter text Start and stop sending content to far sites End a call Confirm your current selection; perform functions on highlighted items Return to the previous screen Select a far-site camera or video source Select a near-site camera or video source Show, move, or hide the Picture-inPicture (PIP) Store camera positions (when followed by a number); delete all stored camera positions Enter a dot in an address Delete letters or numbers Enter letters or numbers; move the camera to a stored position Access the online help; see current system status while in a call 2 WWW.POLYCOM.COM/VIDEODOCUMENTATION CALLING AND ANSWERING Getting More Information If you need additional information about using the VSX system, try these resources: To view help while you're using the system, press control. Help on the remote For network questions, contact your system administrator. For system questions, contact Polycom Technical Support at www.polycom.com/support. Calling and Answering Answering a Video Call The VSX system can answer incoming calls in one of these ways: The system prompts you to answer the calls manually. The system answers incoming calls automatically. When a call comes in, you hear a ringing sound, and you may see a message that includes the number of the person calling. If the person is listed in the system directory, you'll also see the person's name. To answer the call manually: Press Call on the remote control. If your system is set up to automatically answer calls, the call connects automatically. If you see Near on your screen, your microphone is muted. To unmute your Mute on the remote control. For VSX set-top and component on the microphone. microphone, press systems, you can also press Placing a Video Call You can use your system to place a video call in any of these ways: Entering a name or number Choosing a site from: The Recent Calls list The Contacts or Speed Dial list The directory © Polycom, Inc. 3 GETTING STARTED GUIDE FOR THE VSX SERIES Calling by Entering a Name or Number To place a call by entering a name or number: 1. In the dialing field, enter the dialing information. Depending on the capabilities of your system and the system you are calling, the dialing information will look like one of these samples: 10.11.12.13 (IP address) 2555 (extension) stereo.polycom.com (DNS name) Ascot Conference Room (system name) 19784444321 (ISDN number) 2. Enter any additional information needed for the call. The available settings depend on the type of call and your system's configuration. Not all calls require these settings: Call Quality ­ Specify the bandwidth or call type for this call. For most calls, choose Auto to let the system determine the best quality for the call. Second ISDN number ­ Use two numbers only when the person you are calling instructs you to do so. Gateway extension ­ If you need to dial an extension, enter the extension in the second entry field. If your system is not configured with a second entry field, you can enter the extension when the gateway prompts you. 3. Press Call on the remote control to place the call. Call progress indicators appear on the screen to show that the call is in progress. When the indicators turn green, the call is connected. Calling from the Recent Calls List You may be able to choose a number to call from a list of the sites you have called recently. The Recent Calls screen provides details of all incoming and outgoing calls, including the time of the calls. To place a call from the Recent Calls screen: 1. 2. 3. Select Recent Calls from the Place a Call screen. Scroll to the entry you want to call. Press Call to place the call. To see more details about a call listed on the Recent Calls screen, highlight the call and press Help on the remote control. Help and select You can sort the list by pressing the remote keys 1-9. Press Help to view sorting options. 4 WWW.POLYCOM.COM/VIDEODOCUMENTATION CALLING AND ANSWERING Calling from the Contacts or Speed Dial List You may be able to access calling information for specific sites using the Speed Dial or Contacts list on the home screen. To place a call using the Speed Dial or Contacts list: 1. 2. 3. Select Speed Dial or Contacts from the home screen, if necessary. Scroll to the entry you want to call. Press Call to place the call. Calling from the Directory The directory is a list of sites stored locally on the VSX system. If the system is registered with a global directory, the directory also includes entries from the global directory. To place a call from the directory: 1. 2. 3. Press Directory on the remote control. Find the entry to call. Press Call to place the call. For more information about using the directory, see Working with Directory Entries on page 20. Depending on your system configuration, when you make a call using an entry with both ISDN and IP dialing information, the system may prompt you to choose which way to place the call. Ending a Video Call To hang up from a call: 1. 2. Press Hang Up on the remote control. Confirm that you want to end the call. If you don't confirm that you want to hang up, the system disconnects the call automatically after 60 seconds. © Polycom, Inc. 5 GETTING STARTED GUIDE FOR THE VSX SERIES Types of Video Calls You Can Make Depending on your system configuration, you may be able to make calls using ISDN, IP, SIP, or V.35. The following table lists some possible call combinations. From... ISDN You can call... ISDN IP By dialing... Phone number Phone number of the far-site gateway and the extension (E.164 address) of the far site. Enter the extension after the gateway number or wait until the gateway prompts you for the extension. LAN Same LAN Different LAN Alias, E.164 address, or IP address Access code of the near-site gateway, the selected speed code, the ISDN number for the far-site gateway, and the extension (E.164 address) of the far site. Enter the extension after the gateway number or wait until the gateway prompts you for the extension. ISDN Access code of the near-site gateway, the selected speed code, and the ISDN number of the far site. When you call an IP system through a gateway that requires an extension (E.164 address), enter the extension in the dialing field whenever possible. Check with your network administrator for the extension delimiter you will need to enter into the dialing field. For example, some networks use ## to separate the extension from the IP address. When you include the extension, you will be given the option of saving both the number and the extension in the directory when the call ends. If you enter the extension after the gateway connects, then you can save only the gateway number when the call ends. 6 WWW.POLYCOM.COM/VIDEODOCUMENTATION CALLING AND ANSWERING Placing Audio-only Calls and Adding Audio-only Sites You may be able to use your VSX system to place an audio-only call, or you can add an audio-only call to a video conference. This lets you: Use your system in the same way as a telephone. Add audio-only participants to your video calls. Add video calls to your audio-only calls. Other audio options are available if your conference room has a VSX video conferencing system integrated with a SoundStation VTX 1000TM conference phone. For more information about using the SoundStation VTX 1000 conference phone, see Using the SoundStation VTX 1000 Conference Phone in Video Calls on page 33. Placing an Audio-only Call You can place an audio-only call from VSX systems that have Analog Phone or Voice Over ISDN enabled. To place an audio-only call from your system: 1. On the Place a Call screen, enter the number you want to call. To place a call within your PBX system, enter the last four digits of the number. To delete a digit, press 2. Press Delete on the remote control. Call to place the call. Adding an Audio-only Call to a Video Call To add an audio-only call after your video call connects: 1. 2. 3. Press Call on the remote control. Select Add Call from the Hang Up screen. Use the number buttons on the remote control to enter the telephone number of the audio participant that you want to add to your video conference. Press Call on the remote control. Near or Far to return to 4. 5. After the audio call connects, press the video conference. © Polycom, Inc. 7 GETTING STARTED GUIDE FOR THE VSX SERIES Adding a Video Call to an Audio-only Call If you are already in an audio-only call, you can add a video call to your call. To add a video call after your audio-only call connects: 1. 2. On the Place a Call screen, enter the number you want to call. Press Call to place the call. Ending an Audio-only Call To hang up from an audio-only call: 1. 2. Press Hang Up on the remote control. Select the audio-only site from the Hang Up screen to hang up the call. If the person on the telephone hangs up first, you need to disconnect the call from the VSX system, just as you would hang up a telephone receiver in a regular phone call. Controlling What You See Adjusting your cameras lets you show conference participants what you want them to see. You can adjust cameras and other video sources before the meeting starts and while the meeting is in progress. Selecting and Adjusting a Camera or Other Video Source You can use the remote control to select the main camera or any other near-site or far-site video sources, such as document cameras, computers, VCRs, or DVD players. You can also use the remote control to adjust the main camera on VSX set-top and component systems. If you have a VSX 3000 system, you must pan, tilt, and focus the main camera manually. You can also adjust any auxiliary camera or far-site camera that supports pan, tilt, and zoom movement. You can adjust the far-site camera only if it is configured to allow you to control it. 8 WWW.POLYCOM.COM/VIDEODOCUMENTATION CONTROLLING WHAT YOU SEE To select a near-site or far-site camera or other video source: 1. If you are in a call, press Near or Far to select either a near-site or far-site camera or other video source. The icon on the screen indicates which you can select: If you see this, you can control a near-site camera or video source If you see this, you can control a far-site camera or video source 2. Press Camera on the remote control. Then press the number for the camera or other video source you want to select at the near or far site. For example, press 1 to select the main camera. The image from the camera or video source you selected appears on the screen. To adjust a camera using the remote control: 1. 2. Press camera. Near or Far to select either a near-site or far-site Press the arrow buttons on the remote control to move the camera up, down, to the left, or to the right. 3. Press Zoom to zoom out or in. To open or close the privacy shutter on the VSX 3000 system: Move the slider to the right to close the privacy shutter, or to the left to open it. You can still make and receive calls when the shutter is closed, but the people at the far site cannot see you. © Polycom, Inc. 9 GETTING STARTED GUIDE FOR THE VSX SERIES To adjust the camera on the VSX 3000 system: Focus the camera by turning the focus wheel: Setting and Using Camera Presets Camera presets are stored camera positions that you can create ahead of time or during a call. Presets allow you to: Automatically point a camera at pre-defined locations in a room. Select a video source such as a VCR or DVD player, a document camera, or an auxiliary camera. If your system's main camera supports electronic pan, tilt, and zoom movement, you can create up to 100 preset camera positions for the near site. Each preset stores the camera number, its zoom level, and the direction it points (if appropriate). Near-site presets are available for VSX set-top and component systems. They remain in effect until you delete or change them. Depending on configuration capabilities, you may be able to control the camera at the far site. If far-site camera control is allowed, you can create up to 16 presets for the far-site camera. These presets are saved only for the duration of the call. You may also be able to use presets that were created at the far site to control the far-site camera. To move the camera to a preset: 1. 2. If a call is connected, press Near or or far-site camera or other video source. Press a number on the remote control. The camera moves to the preset position for the camera or other video source. Far to choose a near-site 10 WWW.POLYCOM.COM/VIDEODOCUMENTATION CONTROLLING WHAT YOU SEE To view your near-site presets (VSX set-top and component systems): Press Preset on the remote control. Icons for presets 0-9 are shown on the screen. The colored icons indicate stored camera positions, and the gray icons indicate available presets. To store a preset: 1. 2. If you are in a call, press Near or far-site camera or other video source. Far to choose a near-site or If you selected a camera that supports electronic pan, tilt, and zoom, you can adjust the camera's position: Press the arrow buttons on the remote control to move the camera up, down, to the left, or to the right. Press 3. 4. Press Zoom to zoom the camera out or in. Preset on the remote control. Press and hold a number to store the preset position. To store a double-digit preset, press the first digit quickly and hold the second number down. Any existing preset stored at the number you enter is replaced. The system uses preset 0 as the default camera position. To delete all presets: 1. If a call is connected, press source. Press Press Near to choose a near-site video 2. 3. Preset on the remote control. Delete to delete all presets. You cannot delete just one preset. Instead, override an existing preset with the new camera position. © Polycom, Inc. 11 GETTING STARTED GUIDE FOR THE VSX SERIES Switching Between Full Screen Video and the Home Screen Before the call connects, you see the near video in a small window on the Place a Call (home) screen. When the call connects, the system automatically shows the video in the whole screen. You can switch back to the Place a Call screen during a call, for example, if you need to adjust a user setting, and your system is configured to allow you to do so. To learn about adjusting user settings, see Customizing Your Workspace on page 40. To see the video in the full screen: Press Near on the remote control. To see the Place a Call screen: Press Home on the remote control. Showing, Moving, and Turning Off the PIP Your system may be configured to display a Picture-in-Picture (PIP) window. During a call on a single-monitor system, the PIP displays what your main camera is sending to the far site. (This lets you adjust the camera if you need to.) If the far site shows any type of content, the content appears in the main part of the screen, and the PIP changes to show the people at the far site. During a call on a dual-monitor system, what you see on each monitor and in the PIP depends on how the VSX system has been configured. To show, move, or turn off the PIP during a call: Press PIP on the remote control to display the PIP on screen. PIP repeatedly to move it to PIP to While the PIP has a yellow border, press different corners of the screen. After a brief pause, the PIP border turns blue. Then, press turn the PIP off. 12 WWW.POLYCOM.COM/VIDEODOCUMENTATION CONTROLLING WHAT YOU SEE To swap the views shown in the PIP and the main screen: 1. If the PIP is not showing, press display the PIP on screen. Press Camera and select the PIP on the remote control to 2. Swap PIP icon. During calls using Dual Monitor Emulation without content, you can press the PIP button on the remote control to scroll through the following screen layouts: 1. Near and far sites, same size, side by side 2. Far site big, near site small 3. Near site big, far site small 4. Near site, full screen 5. Far site, full screen The last layout viewed is used for the next call. © Polycom, Inc. 13 GETTING STARTED GUIDE FOR THE VSX SERIES Enabling Automatic Camera Tracking (PowerCam Plus Only) If you are using a VSX 7000e or VSX 8000 with the Polycom PowerCamTM Plus camera, you can set the camera to automatically point to the person speaking or to move to the preset location that is closest to the speaker. Use this feature only if you expect the meeting participants to sit or remain somewhat stationary during the meeting. Automatic camera tracking is disabled when your site is muted, when the people at the far site are speaking, and when Polycom StereoSurroundTM is enabled. To enable automatic camera tracking to the speaker: 1. 2. Press Press Near or Far to choose the near-site or far-site camera. Auto until you see "Automatic Camera Tracking." To enable automatic voice tracking to camera presets: 1. 2. Press Press Near or Far to choose the near-site or far-site camera. Auto until you see "Automatic Camera Tracking to Presets." to let you know that The near-site camera icon changes to automatic voice tracking to camera presets is enabled. To disable automatic voice tracking to camera presets: Press Auto until you see "Automatic Camera Tracking Off." You can also turn off automatic tracking by using the remote to pan, tilt, or zoom the camera. 14 WWW.POLYCOM.COM/VIDEODOCUMENTATION CONTROLLING WHAT YOU HEAR Controlling What You Hear Adjusting Volume Use the remote control to raise or lower the volume of the sound you hear. Changing the volume affects only the sound you hear at your site. To adjust the volume: Press Volume. When the VSX 3000 system is in use for video conferencing, use the remote control to adjust the volume. When the VSX 3000 is in use as a monitor for your computer, use the VOL button on the front of the system to adjust the volume. Muting the Microphone You can mute the microphone if you do not want the far site to hear you. For example, you might mute the microphone if you want to speak to someone privately. To mute or unmute the microphone: Press Mute on the remote control. on the microphone. For VSX set-top and component systems that use a Polycom microphone, you can also mute the call by pressing Muting the microphone does not mute audio from a VCR or DVD player being sent to the far site. Enjoying Stereo Audio in Video Calls If your video conferencing room is configured to use stereo sound, the left and right microphone inputs are configured during system setup. It is important that you do not move the microphones as this may detract from the stereo audio experience. Stereo audio is only used in video calls of 256 Kbps or higher. © Polycom, Inc. 15 GETTING STARTED GUIDE FOR THE VSX SERIES Showing Content and Video Sources You may be able to show the following to the far sites: Any information stored on a computer A paper document or object placed on a document camera A videotape or DVD You can share one type of content or one video source at a time, and you can switch to a different type of content or video source if you need to. Participants at other sites can also share content or video sources. Showing Content from a Computer If you have a VSX set-top system with a Visual ConcertTM VSX connected to it, or a VSX component system with an ImageShareTM II connected to it, you can attach a computer and show content that is stored on the computer. If you have a QSXTM system connected to your VSX system, you can share content via an Internet connection with up to 10 meeting participants who do not have video capabilities. For more information, refer to the Administrator's Guide for the Polycom QSX. You can also show content without additional hardware using the software application called People+ContentTM IP. If you have the Polycom People+Content IP option enabled on your VSX system and the software application installed on your computer, you can show content from any Windows XP or Windows 2000 computer that is connected to the network. You don't need cables or hardware. All you need is the IP address of your VSX system. For more information about enabling People+Content IP on your VSX system, talk to the administrator of your VSX system. People+Content IP provides video-only content. No audio is shared. If your computer is connected to the LAN, you can also share content from network locations. When you share content from a computer, the far site sees just what you see on the computer screen. 16 WWW.POLYCOM.COM/VIDEODOCUMENTATION SHOWING CONTENT AND VIDEO SOURCES Showing Content with People+Content IP To install the People+Content IP application on a computer: 1. 2. On a computer with Windows XP or Windows 2000, open a web browser and go to www.polycom.com. Download and install the People+Content IP application from the Polycom Resource Center. To start showing content: 1. 2. 3. 4. On the computer, start the Polycom People+Content IP application. Enter the IP address of your video conferencing system and the meeting password, if one is set. Click Connect. Open the content you want to show, and do one of the following: Click Press control. in People+Content IP. Graphics on the video conferencing system's remote If you have content sources connected to your VSX system and you press Graphics on the remote control, you are prompted to select the content source to use. When you are sending content, the content sharing icon appears on your main monitor. Depending on the configuration of your system, you may also see the content on your monitor or projector. To stop showing content: 1. 2. If the People+Content IP toolbar is minimized, maximize it by clicking the icon in the task bar. Do one of the following: Click Press control. 3. in People+Content IP. Graphics on the video conferencing system's remote If others in the conference want to send content from the same VSX system using People+Content IP, click Disconnect to disconnect from the VSX system so that they may connect. Only one computer at a time can be connected. © Polycom, Inc. 17 GETTING STARTED GUIDE FOR THE VSX SERIES Showing Content with a Visual Concert VSX or ImageShare II Before you show content, check that the computer video is configured to use one of these supported resolutions and refresh rates: Resolution 640 x 480 800 x 600 1024 x 768 1280 x 1024 (scaled and sent to the far site in 1024 x 768 format) Refresh rates (Hz) 60, 72, 75, 85 60, 72, 75, 85 60, 70, 75, 85 60 To set the resolution and refresh rate, go to your computer's Display Control Panel. To start showing content using a Visual Concert VSX: 1. Connect the computer to a Visual Concert VSX device: For more information about using the Visual Concert VSX device, see the Visual Concert VSX Quick Tips, available at www.polycom.com/videodocumentation. 2. Press on the Visual Concert VSX, or press Graphics or Camera on the remote control. 18 WWW.POLYCOM.COM/VIDEODOCUMENTATION SHOWING CONTENT AND VIDEO SOURCES To stop showing content using a Visual Concert VSX: Press on the Visual Concert VSX or press Camera on the remote control. To show content using an ImageShare II: 1. Connect the computer to an ImageShare II: Graphics or 2. Press the blue ImageShare selection button to start and stop displaying content. Using a Document Camera, VCR, or DVD Player All VSX systems enable you to show different types of information to other sites in a call, such as through a document camera, VCR, or DVD player. Before the call begins: 1. 2. Make sure the document camera, VCR, or DVD player is connected and powered on. Refer to the setup sheet that came with your system. Position your document or object in the document camera or insert the videotape or DVD. To start showing a document, object, videotape, or DVD in a call: 1. 2. 3. Press Camera on the remote control. Select a video source. Press on the remote control. To stop showing a document, object, videotape, or DVD in a call: 1. 2. 3. Press Camera on the remote control. Select the main camera. Press on the remote control. © Polycom, Inc. 19 GETTING STARTED GUIDE FOR THE VSX SERIES Working with Directory Entries The directory on your VSX system stores dialing information that helps you make calls quickly and easily. When a site listed in the directory calls your system, the system displays the name on the screen when the call comes in. If a site that calls you is not listed in the directory, you might be prompted to save the contact information in the directory when the call ends. If your system is registered with a global directory server, your directory contains two types of entries: Local entries: Information about sites that you have added. These entries are stored locally on your VSX system, and depending on your system setup, you can remove or edit these entries. You can also assign local entries to categories to make it easier to find numbers. Local entries are available to anyone who uses the system. Global entries: Information about other active sites that are registered with the same Global Directory Server. These entries are stored on the Global Directory Server, and you cannot edit them. You can make a local copy if you want to make changes. Global entries are marked as available or offline. Searching the Directory You can find entries in the directory by: Spelling the first or last name using the number buttons on the remote control Pressing Keyboard to use the on-screen keyboard to spell the name Up and Down Zoom Out Scrolling through the list of names using the arrow buttons Paging through the list of names using Zoom In and Using the alphabet tabs to move through the directory and then scrolling to the name you want Adding, Editing, and Deleting Directory Entries You can create entries for point-to-point calls and multipoint calls and save them in the VSX system's directory. Everyone at your site who uses the system can use the entries you create, and you can use the entries created by others. You can also edit the information in any local entry. Users at other sites cannot access the local entries on your system. To add a single-site entry to the directory: 1. 2. Press Directory on the remote control. Select New and specify that this is an entry for one site. 20 WWW.POLYCOM.COM/VIDEODOCUMENTATION WORKING WITH DIRECTORY ENTRIES 3. Specify the following information: In this field... Name Enter this information... Name that will appear in the directory list and on incoming call messages. ISDN number to use for calling the site. Call speed to use for ISDN calls to the site. IP address for calls to the site. The system's gateway extension. Call speed to use for IP calls to the site. Optional contact information for other resources in the conference room. Number Call Quality IP Number Extension Call Quality Phone Number Mobile Number Email Category 4. Designation to help you quickly find the number in the directory. Select Save to save the entry. To add a multiple-site entry to the directory: 1. 2. 3. Press Directory on the remote control. Select New and specify that this is an entry for multiple sites. Add numbers to this multiple-site entry in one of these ways: Select entries from the directory. Add entries manually. The number of sites that you can add depends on the capabilities of your system. 4. 5. 6. Specify a speed for the call. Note that each call in the multipoint conference is placed at the same speed. Select Save to save the entry. Enter a name for this entry as you want it to appear in the directory list. © Polycom, Inc. 21 GETTING STARTED GUIDE FOR THE VSX SERIES To edit an entry: 1. 2. 3. 4. Press Directory on the remote control. Scroll to the entry you want to edit and then select Edit. Edit the information as needed. Select Save to save your changes and return to the directory. To delete an entry: 1. 2. Press Directory on the remote control. Scroll to the entry you want to delete and then select Delete. While you can delete entries from your local directory, you cannot delete entries from a global directory. Categorizing Directory Entries When you categorize your local entries, you can find calling information quickly by searching just the entries in a group instead of the entire directory. To create a new group: 1. 2. 3. 4. 5. Press Directory on the remote control. Select Group. Select Edit Category. Enter a group name. Press Back on the remote control to save the new group. To delete a group: 1. 2. 3. 4. Press Directory on the remote control. Select Group. Select Edit Category. Scroll to the group name you want to delete and then select Delete. When you delete a group, all entries in that group are deleted. If you want to keep these entries, be sure to assign them to a new group before you delete the old group. 22 WWW.POLYCOM.COM/VIDEODOCUMENTATION WORKING WITH DIRECTORY ENTRIES To assign an entry to a group: 1. 2. 3. 4. Press Directory on the remote control. Scroll to the entry you want to assign to a group and then select Edit. Select Next and select the Category. Select Save to save your changes and return to the directory. Refreshing Global Directory Entries The global directory entries are periodically refreshed on systems registered to the Global Directory Server. You can also manually refresh the global directory entries on your system. To manually refresh global directory entries: 1. 2. Press Directory on the remote control. Navigate to the red Polycom logo in the top right corner of the screen. If you do not see a red Polycom logo in the top right corner of the screen, your system is not registered with the Global Directory Server. Contact your system administrator for more information. 3. Select the logo and choose Refresh. © Polycom, Inc. 23 GETTING STARTED GUIDE FOR THE VSX SERIES Including Multiple Sites in Calls Your system may be configured to participate in multipoint conferences. During a multipoint conference, a multipoint conferencing unit (MCU) enables the video to switch between sites so that you can always see and hear the participant who is speaking. You can also share content in a multipoint call, just as you can in a point-to-point call. The VSX 5000 and VSX 6000 systems can be used to participate as a site in a multipoint call but cannot initiate a multipoint call. About Multipoint Calls With the VSX system you can make multipoint calls using an external MCU or the internal multipoint option. The type of MCU affects the conference as shown in this table: This MCU... Internal MCU Lets you include... Up to four video sites (six for the VSX 8000) including your site Supports these calls... IP ISDN or V.35 SIP Both IP and ISDN/V.35 Both SIP and ISDN/V.35 Note: IP and SIP cannot be used in the same call. External MCU Number of sites allowed by the MCU IP ISDN or V.35 SIP Both IP and ISDN/V.35 Note: IP and SIP cannot be used in the same call. For calls using the internal MCU option, the VSX system can initiate the call or the other sites can call the VSX system to join the conference. Before the call begins, and depending on the MCU and conference type, during the call Lets you add sites... Before the call begins, and during the call 24 WWW.POLYCOM.COM/VIDEODOCUMENTATION INCLUDING MULTIPLE SITES IN CALLS Placing a Multipoint Call How you place a multipoint call depends on whether you're using the internal MCU option or an external MCU. If your organization uses Polycom's PathNavigatorTM, you can also use PathNavigator's conference on demand feature to place multipoint calls. For calls using the internal MCU option, you can define a multiple-site directory entry to call all of the sites at one time. Alternatively, you can place a call to the first site and then add other sites after the first call connects. For calls using an external MCU, you may need to enter calling information about all of the sites before the call begins. Contact your system administrator for more information. VSX 3000, VSX 3000A, VSX 7000, VSX 7000s, and VSX 7000e systems with an internal MCU can host multipoint calls that include up to four video sites, plus one audio site. The VSX 8000 provides multipoint support for calls that include up to six video sites, plus one audio site. For calls using PathNavigator's conference on demand feature, the system administrator must: Register the VSX system with PathNavigator. Configure the VSX system to use PathNavigator for multipoint calls. Create a multiple-site entry in the directory. To place a multipoint call by adding sites to a call: 1. 2. 3. 4. Call the first site. When the call connects, press Call on the remote control. Select Add Video Call, and place a call to the next site. Repeat steps 2 and 3 until all sites are connected. To place a multipoint call using a multiple-site directory entry: 1. 2. 3. Press Directory on the remote control. Find the multiple-site entry in the directory list. Press Call to place the call. To place a cascaded multipoint call: 1. 2. Place a multiple-site call from the directory, or place calls one at a time to up to three other video sites. Ask each site to call up to two additional sites. © Polycom, Inc. 25 GETTING STARTED GUIDE FOR THE VSX SERIES Supplying a Password for External MCU Calls External MCUs sometimes require you to enter a password in order to join a conference. Depending on your system configuration, you can set up the system to enter the meeting password for you. To configure a meeting password: 1. 2. 3. Select System from the Place a Call screen. Select User Settings from the System screen. Enter the password in the Meeting Password field in one of these ways: Press the remote control number buttons, using the text-entry method commonly used with cell phones. Keyboard to use the on-screen keyboard to enter Press characters. 4. Press screen. Home to save your change and return to the Place a Call If you need to generate touch tones (DTMF tones), press then use the remote control keypad. on the remote control, 26 WWW.POLYCOM.COM/VIDEODOCUMENTATION INCLUDING MULTIPLE SITES IN CALLS About Multipoint Viewing Modes Your system will be configured to display sites during a multipoint call in a particular way. For example, you may be able to view all of the sites at the same time, or you may only see the site where the speaker is located. The following table describes the different multipoint viewing modes. What you see during a multipoint call can vary depending on how the VSX system is configured, the number of sites participating, and whether content is shared. Setting Auto Description Allow the system to switch between Discussion and Presentation modes, based on the interaction between the sites. If more than one site is talking at the same time, the system uses Discussion mode so that all speakers can be seen. If one speaker talks without interruption for about 15 seconds, the system uses Presentation mode so that all participants can see the speaker in a larger picture. Discussion View all of the sites at the same time, including your own site. This is also known as continuous presence. Systems with: Single monitor Dual monitors See this: All sites, each in its own window Speaker on second monitor with all other sites on first monitor, or one far site on each monitor Presentation View the person who is speaking. This is also known as voice activated switching. The current speaker always sees all sites, each in its own window, on the first monitor. Systems with: Single monitor Dual monitors See this: Speaker in full screen Speaker on the first monitor and near site on the second monitor Full Screen Enable every site in the call to see the speaker full screen. © Polycom, Inc. 27 GETTING STARTED GUIDE FOR THE VSX SERIES Controlling How the System Answers Multipoint Calls 1. 2. 3. Select System from the Place a Call screen. Select User Settings from the System screen. Scroll to the Auto-Answer Multipoint field and select one of the following: To do this... Answer calls manually. When a call comes in, you hear a ring, and the system prompts you to accept or refuse the call. Yes Answer incoming calls automatically. When a call comes in, you hear a ring, and the call connects. Do Not Disturb Refuse incoming calls. Callers hear a busy signal, and you receive no notification about incoming calls. Select this... No Using Chair Control for Multipoint Calls During some multipoint calls, you can use chair control to manage the people video. In this type of call, the chair controller can choose the site whose video is sent to other sites in the conference. The chair controller can also disconnect a site or end the conference. Any participant can choose to view a specific site, request to be the broadcaster, or request to be chair controller. Only one site at a time can be the chair controller. Before a site can become the controller, the site with control must give up control. The type of MCU in use and the systems in the call determine whether chair control is available. This MCU... Internal MCU Allows chair control if... The call includes: VSX systems, ViewStation® EX, ViewStation FX, and VS4000TM systems connected by IP, ISDN, or both IP and ISDN Other systems connected by ISDN only External MCU Allowed by the external MCU 28 WWW.POLYCOM.COM/VIDEODOCUMENTATION INCLUDING MULTIPLE SITES IN CALLS To use the chair control options when you are in a multipoint call: 1. 2. On a computer, open a web browser. In the browser address line, enter the system's IP address, for example, http://10.11.12.13, to go to the video conferencing system's web interface. Click Place a Call. Click Chair Control to go to the Chair Control screen. The Chair Control option is only available when the system is in a multipoint call. It is not available in cascaded multipoint calls. 3. 4. 5. Select a site from the list and then use the controls in the web interface to perform one of these actions: If you are... Chair controller You can do this... By selecting... Pass chair controls to the selected site. View the selected site's video. This remains in effect until you choose Stop Viewing Site or you release chair control. Return to viewing the video selected by the chair or by the MCU. Send your site's video to the other sites. Send the selected site's video to the other sites. Remove the selected site from the conference. Disconnect all sites and end the call. Release Chair View Site Stop Viewing Site Make Me the Broadcaster Select Broadcaster Disconnect Site End Conference Acquire Chair View Site Participant Request control of the conference. View the selected site's video. This does not change what other sites see. Return to viewing the video selected by the chair or the MCU. Stop Viewing Site © Polycom, Inc. 29 GETTING STARTED GUIDE FOR THE VSX SERIES Changing the Way Calls Are Answered Your system administrator may have configured the system to let you choose the way incoming calls are handled. Temporarily Refusing Calls If you do not wish to be disturbed by calls, you can refuse incoming calls with the Do Not Disturb feature. Callers hear a busy signal and you receive no notification about incoming calls. You can, however, make outgoing calls. To temporarily refuse incoming calls: 1. 2. On the Place a Call screen, select screen. Select On to set Do Not Disturb. in the lower right corner of the While the system is not accepting calls, you see in the lower right corner of the screen. This setting stays in effect until you change it. Setting your status to I am Available or I am Busy on the contact list home screen changes the Do Not Disturb icon status on the Place a Call screen, if it is displayed there. Likewise, changing the Do Not Disturb icon on the Place a Call screen changes your status on the contact list home screen. Answering Calls Automatically Depending on your system configuration, you can specify whether to answer calls automatically or to have the system announce incoming calls and wait for you to answer manually. Automatically answering calls is convenient, but it can create security issues. An unexpected caller could interrupt a meeting in progress or look at equipment and notes left in an empty room. To prevent incoming callers from overhearing a conversation not intended for them, you can choose to mute all automatically answered calls. 30 WWW.POLYCOM.COM/VIDEODOCUMENTATION CHANGING THE WAY CALLS ARE ANSWERED To automatically answer calls: 1. 2. 3. Select System from the Place a Call screen. Select User Settings from the System screen. If you want to automatically answer incoming point-to-point calls, scroll to Auto-Answer Point to Point, press and select Yes. 4. on the remote control If you want to automatically answer incoming multipoint calls, scroll to Auto-Answer Multipoint, press select Yes. on the remote control and 5. Press screen. Home to save your change and return to the Place a Call If you have a VSX 3000 system that you are using as your computer monitor, Polycom recommends that you set up the system so that you have to answer calls manually. If you receive a call while using the system as a computer monitor, you hear a ringing sound and you can switch to video to answer the call manually. Alternatively, you can ignore the call and it will not connect, thereby preventing the caller from seeing or hearing you at your desk. Muting Automatically Answered Calls Depending on your system configuration, you can choose whether to mute the audio when calls connect if your system is configured to answer calls automatically. This prevents callers from overhearing conversations or meetings. After the call connects, you can press ready to unmute the call. Mute when you're Note that, if you enable this option during a call, the audio for the current meeting is not affected. To mute automatically answered calls: 1. 2. 3. Select System from the Place a Call screen. Select User Settings from the System screen. Scroll to Mute Auto-Answer Calls and press control to enable the option. Press screen. on the remote 4. Home to save your change and return to the Place a Call © Polycom, Inc. 31 GETTING STARTED GUIDE FOR THE VSX SERIES Scheduling Calls You can use the calendar and call scheduling feature to schedule video conferences. When you schedule a call using this feature, the system automatically calls the site you selected on the date and time you specified. For recurring calls, you can indicate whether you want the system to automatically make the call daily, weekly, or monthly. To schedule a call: 1. 2. 3. 4. 5. 6. 7. Select System from the Place a Call screen. Select Utilities from the System screen. Select Call Scheduler from the Utilities screen. Select New Entry from the Call Scheduler screen. Select the directory and then select a single-site or multiple-site entry to call. Select the date and time for the call. Select Next and specify whether the meeting repeats. On the scheduled time and date, your VSX system will automatically call the selected site. To view scheduled calls in the calendar: 1. 2. 3. Select System from the Place a Call screen. Select Utilities from the System screen. Select Calendar from the Utilities screen. Dates with scheduled calls are marked in the calendar with a small green triangle. 32 WWW.POLYCOM.COM/VIDEODOCUMENTATION USING THE SOUNDSTATION VTX 1000 CONFERENCE PHONE IN VIDEO CALLS Using the SoundStation VTX 1000 Conference Phone in Video Calls Your conference room may include a VSX video conferencing system integrated with a SoundStation VTX 1000 conference phone. This configuration lets you use the video conferencing system and the conference phone together to place and manage video and audio-only calls. If the system is configured correctly, "VSX OK" appears on the conference phone display. Placing a Video Call with the SoundStation VTX 1000 Conference Phone If your VSX video conferencing system and SoundStation VTX 1000 have been configured to work together, you can use the conference phone to place video calls. To place a video call using the SoundStation VTX 1000 phone: 1. 2. Leave the SoundStation VTX 1000 conference phone on hook. On the conference phone keypad, enter one of these: The ISDN number (for example, 19784444321) of the VSX system The IP address (for example, 10.11.12.13) of the VSX system 3. Press the VID CALL soft key on the conference phone to place the call. Adding Sites to a Video Call Using the SoundStation VTX 1000 Conference Phone You can add video or audio-only sites to a video call using the SoundStation VTX conference phone. To add video or audio-only sites: 1. 2. Place a video call to the first site using the SoundStation VTX conference phone or the video conferencing system. On the conference phone, enter the number of the site you want to add. To call a video site, enter the number and press the VID CALL soft key. To call an audio-only site, enter the number and press the Phone button on the phone keypad. Use the SoundStation VTX 1000 conference phone to make volume adjustments after adding an audio-only site to a video call. © Polycom, Inc. 33 GETTING STARTED GUIDE FOR THE VSX SERIES Muting the Audio in a Call that Includes a SoundStation VTX Conference Phone You can use the mute button on the SoundStation VTX conference phone to mute the audio in video calls. To mute the audio in a call with the SoundStation VTX 1000 conference phone: Do one of the following: Press the Mute button on the conference phone. Press Mute on the remote control. The red indicator lights on the conference phone show when the audio is muted. The near site mute icon also appears on the monitor display. Adding Video to a SoundStation VTX 1000 Conference Phone Audio-only Call If you are in an audio call with another SoundStation VTX 1000 conference phone and the far site also has a VSX video conferencing system integrated with a SoundStation VTX conference phone, you can switch from the audio-only call to a video call. To add video to an audio call: 1. 2. Place a call with your SoundStation VTX conference phone to the far site's conference phone. When the audio call has connected, press the ADD VIDEO soft key on the conference phone. You hear a ringing sound as the video portion of the call is added. The SoundStation VTX conference phones are used as microphones for the video call. 34 WWW.POLYCOM.COM/VIDEODOCUMENTATION USING THE SOUNDSTATION VTX 1000 CONFERENCE PHONE IN VIDEO CALLS Ending a Call To end a call using a VSX system integrated with a SoundStation VTX 1000 conference phone: From the conference phone: Press the END VIDEO soft key on the phone. If the conference is a point-to-point video call, it will end immediately. If the conference is a multi-point video call, the VSX Hang Up screen appears on the monitor. In this case, select which site(s) to disconnect. From the VSX system: 1. 2. Press Hang Up on the VSX remote control. On the VSX Hang Up screen, do one of the following: Select which site to disconnect. Choose Hang Up All to end the call for all sites. Ending a Call with Audio-only Participants Your conference may include a mix of video participants and audio-only participants. If an audio-only participant hangs up during the call, you need to disconnect the call from the conference. This is the same as hanging up a telephone receiver in a regular phone call. To disconnect the audio-only call: 1. 2. Press Hang Up on the remote control. If the call is a multipoint call, select VTX Conference Phone from the Hang Up screen to clear the audio line. Even if you hang up the video call or the audio-only site hangs up, you still need to hang up the audio-only call from your system. If you do not disconnect the audio-only call from the VSX system, you will hear a tone from the telephone through the conference. © Polycom, Inc. 35 GETTING STARTED GUIDE FOR THE VSX SERIES Using Avaya Network Features with Video Calls Depending on how your system is configured, you may be able to use Avaya telephony network features such as call forwarding, transferring calls, and adding additional sites in an audio-only conference. To activate call forwarding: 1. 2. Make sure that the VSX system is not in a call. From the Place a Call screen on the VSX system, dial the Feature Access Code provided by the Avaya Communications Manager (ACM) administrator, followed by the E.164 extension of the system to which you want to forward the calls. For example, dial *22016 if *2 is the Feature Access Code and 2016 is the system E.164. Wait for confirmation beeps. 3. To deactivate call forwarding: 1. From the VSX system Place a Call screen, dial the Feature Access Code provided by the ACM administrator. For example, #2 if #2 is the Feature Access Code for disabling call forwarding. Wait for confirmation beeps. 2. To transfer a call: 1. While in a call, press the tone pad. on your VSX system remote control to access 2. 3. Dot on the remote to activate flash hook. The first far-site Press system is placed on hold. Wait for a dial tone, then dial the extension of the far-site system to which you want to transfer the call. The call connects both audio and video between the local system and the second far-site system. The first far-site system is still on hold. Hang up the near-site system. The two far-site systems are now connected in a call with audio and video, if the capabilities are present. 4. 36 WWW.POLYCOM.COM/VIDEODOCUMENTATION USING MICROSOFT LCS FEATURES WITH VIDEO CALLS