2002 Pontiac Montana Owner's Manual Litho in U.S.A. Part Number 10315371 A First Edition ECopyright General Motors Corporation 06/22/01 All Rights Reserved i We support voluntary technician certification. GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem and the name MONTANA are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice. For vehicles first sold in Canada, substitute the name "General Motors of Canada Limited" for Pontiac Division whenever it appears in this manual. Please keep this manual in your vehicle, so it will be there if you ever need it when you're on the road. If you sell the vehicle, please leave this manual in it so the new owner can use it. For Canadian Owners Who Prefer a French Language Manual: Aux propriétaires canadiens: Vous pouvez vous procurer un exemplaire de ce guide en français chez votre concessionaire ou au: Helm, Incorporated P.O. Box 07130 Detroit, MI 48207 ii How to Use this Manual Many people read their owner's manual from beginning to end when they first receive their new vehicle. If you do this, it will help you learn about the features and controls for your vehicle. In this manual, you'll find that pictures and words work together to explain things quickly. CAUTION: These mean there is something that could hurt you or other people. In the caution area, we tell you what the hazard is. Then we tell you what to do to help avoid or reduce the hazard. Please read these cautions. If you don't, you or others could be hurt. You will also find a circle with a slash through it in this book. This safety symbol means "Don't," "Don't do this" or "Don't let this happen." Safety Warnings and Symbols You will find a number of safety cautions in this book. We use a box and the word CAUTION to tell you about things that could hurt you if you were to ignore the warning. iii Vehicle Damage Warnings Also, in this book you will find these notices: Vehicle Symbols Your vehicle may be equipped with components and labels that use symbols instead of text. Symbols, used on your vehicle, are shown along with the text describing the operation or information relating to a specific component, control, message, gage or indicator. If you need help figuring out a specific name of a component, gage or indicator reference the following topics in the Index: NOTICE: These mean there is something that could damage your vehicle. In the notice area, we tell you about something that can damage your vehicle. Many times, this damage would not be covered by your warranty, and it could be costly. But the notice will tell you what to do to help avoid the damage. When you read other manuals, you might see CAUTION and NOTICE warnings in different colors or in different words. You'll also see warning labels on your vehicle. They use the same words, CAUTION or NOTICE. D D D D "Engine Compartment Overview" "Instrument Panel" "Comfort Controls" "Audio Systems" Also see "Warning Lights and Gages" in the Index. iv These are some examples of vehicle symbols you may find on your vehicle: v Section 1 Seats and Restraint Systems Here you'll find information about the seats in your vehicle and how to use your safety belts properly. You can also learn about some things you should not do with air bags and safety belts. 1-2 1-6 1-28 1-33 1-34 1-34 1-42 1-43 1-43 1-52 1-52 Seats and Seat Controls Rear Seats Safety Belts: They're for Everyone Here Are Questions Many People Ask About Safety Belts -- and the Answers How to Wear Safety Belts Properly Driver Position Safety Belt Use During Pregnancy Right Front Passenger Position Supplemental Restraint Systems (SRS) Safety Belt Pretensioners Rear Seat Passengers 1-56 1-58 1-60 1-61 1-65 1-76 1-95 1-99 1-99 1-100 Rear Safety Belt Comfort Guides for Children and Small Adults Center Passenger Position (Bench Seat) Center Passenger Position (Bucket Seat) Children Built-in Child Restraint (Option) Restraint Systems for Children Older Children Safety Belt Extender Checking Your Restraint Systems Replacing Restraint System Parts After a Crash 1- 1-1 Seats and Seat Controls This section tells you about the seats -- how to adjust them, take them out, put them back in, fold and unfold them. To raise the seat, pull up on the lever located on the front right side of the seat. Driver's Four-Way Manual Seat Use the lever located on the front left side of the seat to adjust the seat forward or rearward. To lower the seat, push the lever down. Adjust the seat and release the lever. CAUTION: Pull up the lever to unlock the seat. Slide the seat to where you want it and release the lever. To make sure the seat is locked into place, try to move the seat back and forth with your body. You can lose control of the vehicle if you try to adjust a manual driver's seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you don't want to. Adjust the driver's seat only when the vehicle is not moving. 1-2 Manual Front Passenger's Seat To move the seat, pull up the lever located on the front of the seat to unlock it. Six-Way Power Seat (Option) If your vehicle has this option, the six-way power seat control is located on the outboard side of both the driver's and the front passenger's seats. Slide the seat to where you want it and release the lever. To make sure the seat is locked into place, try to move the seat back and forth with your body. D Move the front of the control up or down to adjust the front portion of the cushion up or down. rear portion of the cushion up or down. the entire seat up or down. D Move the rear of the control up or down to adjust the D Lift up or push down on the whole control to move D To move the whole seat forward or rearward, slide the control forward or rearward. 1-3 Heated Front Seats (Option) If your vehicle has this option, the heated seat switches are located in the instrument panel switchbank. Reclining Front Seatbacks All front seats recline. This feature will quickly heat the lower cushions and lower back of the driver's and front passenger's seats for added comfort. The left switch is for the driver's seat and the right switch is for the front passenger's seat. Press the bottom of the switch to turn the heater on. The indicator light on the switch will glow. Press the top of the switch to turn the heater off. The heated seat switch will turn off when the ignition is turned to OFF and will resume operation when the ignition is turned to RUN, unless the switch is manually turned off. To adjust the seatback, pull up on the lever located on the outboard sides of both the driver's and the front passenger's seats. It is easier to recline the seat if you lean forward, taking your weight off the seatback. 1-4 CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can't do their job when you're reclined like this. The shoulder belt can't do its job because it won't be against your body. Instead, it will be in front of you. In a crash you could go into it, receiving neck or other injuries. The lap belt can't do its job either. In a crash the belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries. For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear your safety belt properly. But don't have a seatback reclined if your vehicle is moving. 1-5 Head Restraints Rear Seats Seat Controls The rear seats in your vehicle have levers and straps used to adjust, remove and reinstall the seats. By using the levers and straps, in the correct order, you can easily remove the seats from your vehicle. When you put the seats back in the vehicle, be sure to follow the label on the back of the seat for proper location. Second Row Safety Belt Stowage If your vehicle has a split bench seat in the second row, use the clip on the safety belt to secure the belt after it is disconnected from the mini-buckle. When removing the second row split bench seat, secure the loose end of the safety belt in this clip. This will keep the safety belt from dangling and possibly striking something. Adjust your head restraint so that the top of the restraint is closest to the top of your head. This position reduces the chance of a neck injury in a crash. The front seat head restraints in your vehicle are adjustable. Slide the restraint up or down to adjust it. The rear seat head restraints in your vehicle may be adjustable. They work the same as the front seat head restraints. Do not have the second row outside safety belt stored if someone is sitting in the second row outside position. 1-6 Flip and Fold Feature The rear seats in your vehicle can be folded forward. Use this feature for exiting and entering third row seats. 1. If the seats have the adjustable head restraints, push them fully down. 2. Fold the seatback flat on the seat, by either pulling on the nylon strap on the rear of the seat or lifting up on the lever located on the front of the seatback. If the seat adjusts forward, slide it all the way back. To return the seat(s) to the normal position, do the following: 1. Push the seat back and firmly push the rear hooks onto the rear floor pins by pushing down on the rear of the seat. 2. Try to raise the seat to check that it is locked down. 3. Lift the seatback recliner lever or pull the nylon strap on the back of the seat and raise the seatback until it locks upright. 4. Push and pull on the seatback to check that it is locked. 3. Release the rear set of hooks from the floor pins by pulling the nylon strap located at the base of the seat; hang on to the strap as the seat folds forward. 1-7 Split Bench Seats (If Equipped) If you have the split bench seat (50/50 or 40/60), the seatbacks can be folded forward or reclined individually and the seats can be removed individually. The second row (40/60) sections can also be adjusted forward or rearward individually. The second row (40/60) split bench may be equipped with a built-in child restraint. See "Built-In Child Restraint" in the Index. Folding or Reclining the Seatbacks The seatbacks on each section of the split bench seat can be either folded forward or reclined. The following explains how to use the nylon strap to fold or recline the seatbacks. To fold the seatback forward, pull this nylon strap located on the rear of the seat. The seatback will lock into place. CAUTION: If the seatback isn't locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked. To raise a seatback, pull the nylon strap while raising the seatback until it locks upright. Push and pull on the seatback to check that it is locked into place. To recline the seatback, pull the nylon strap. Press back on the seatback until you reach the desired position then let go of the nylon strap. To return the seatback to an upright position, pull on the nylon strap without putting any pressure on the seatback. Push and pull on the seatback to be sure it is locked into place. 1-8 The following explains how to use the recliner lever to fold or recline the seatbacks. To fold the seatback forward, lift up on the recliner lever located on the front of the seatback. The seatback will lock into place. Adjusting the Split Bench Seats (Second Row) The second row bench seats are adjustable. There are two adjustment levers on each section of the split bench seats to adjust the seat forward or rearward. To raise a seatback, lift the recliner lever while raising the seatback until it locks upright. Push and pull on the seatback to check that it is locked into place. To recline the seatback, lift the recliner lever. Press back on the seatback until you reach the desired position then let go of the recliner lever. To return the seatback to an upright position, lift the recliner lever without putting any pressure on the seatback. Push and pull on the seatback to be sure it is locked into place. One is located below the center, in the front of each section of the split bench. 1-9 The other lever is located on the rear of the seat. Removing the Split Bench Seat Make sure the seatback is in the upright position. 1. For the second row split bench, with the seatback in the upright position, unhook the side attachment for the safety belt. This mini-buckle is located on the right side of the seat. 2. Push the red center of the buckle up with a small pointed object -- like a key or a pen -- to remove the seat belt, if needed. Lift up either lever and slide the seat forward or rearward. Release the lever. Push and pull on the seat to make sure it is locked into place. 3 ...