PROFESSIONAL TABLE-TOP CD PLAYER PROFESSIONAL COMPACTDISCPLAYER INSTRUCTION MANUAL TABLE OF CONTENTS NOTE ON USE......................................................................................2 FOR SAFE AND EFFICIENT OPERATION ................................................ 2 IMPORTANT SAFETY INSTRUCTION..............................................3 S A F E T Y A N D C E R T I F I C A T I O N ... ... ... ... ... ... .................................3 DESCRIPTION OF THE FUNCTIONS ..................................................... 4 CONNECTIONS .................................................................................. 6 BASIC OPERATION ............................................................................... 7 TROUBLE SHOOTING .............................................................7 1 NOTE ON USE BE CAREFUL OF HIGH TEMPERATURE TO A VOID DUST & MOISTURE KEEP AWAY FROM TV & TO AVOID PLACING ON UN- MAGNETISM STABLE LOCATION DO NOT USE CHEMICALS IF OUT OF WORK, CONTACT SALES AGENCY IMMEDIATELY DO NOT OPEN THE CASE CARE WITH THE POWER CORD FOR SAFE AND EFFICIENT OPERATION Be careful with heat and extreme temperature Avoid exposing it to direct rays of the sun or near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Not put it in a temperature below 41°F /5°C, or exceeding 95°F /35°C. 2. Keep away from humidity, water and dust Do not place the set in a location with high humidity or lots of dust. Containers with water should not be placed on the set. 3. Keep away from sources of hum and noise Such as transformer motor, tuner, TV set and amplifier. 4. To avoid placing on un-stable location Select a level and stable location to avoid vibration. 5. Do not use chemicals or volatile liquids for cleaning Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt. 6. If out of work, contact sales agency immediately Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not open the cabinet by yourself, it might result a danger of electric shock. 6-1. Take care with the power cable Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. When not using the player for an extended period of time be sure to disconnect the plug from the receptacle. 7. Carefully handling the compact disc Always keep the disc clean; do not use cracked or wrapped discs, it will damage the player. 1. 2 IMPORTANT SAFETY INSTRUCTION · · · · Read and follow all instructions and heed all warnings. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. Only use attachments/accessories specified by the manufacturer Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. · SAFETY CERTIFICATION Laser Diode Properties Material: Ga.-Al-As Wavelength: 755-815 nm (25°C) Laser Output: Continuous Wave max. 0.5mW CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFED HEREIN MAY RESULT IN HAZARDOUS RADIATIO EXPOSURE. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 3 DESCRIPTION OF THE FUNCTIONS Function of the Control Unit 1. TIME /STOP BUTTON This button switches the time display between each remaining time, elapsed playing time, and total remaining time. The unit will be in the "stop" mode if you continue to press the button for more than 3 seconds CONT./SINGLE BUTTON ( OUTRO) To press this button it can switch between auto cue single and continue. The selected mode is indicated on the display. *AUTO CUE SINGLE-After each track, the unit pauses at the beginning of next track. The playback starts from audible point. *CONTINUE--To play the whole tracks. *OUTRO-Press the button for 3 seconds for OUTRO function, the unit will play the last 30 seconds of each track. EJECT Button Press to eject the disc TRACK SKIP BUTTON This button selects the track to be played BOP BUTTON The playback will automatically play from the CUE point upon the button is pressed. CUE BUTTON The cue function allows the CD to be played from the memorized point any number of times. With the unit in the pause mode, pressing the CUE button to set up the memorized cue point and then the cue button blinks. PLAY/ PAUSE BUTTON Each press of this button causes the operation to change between PLAY and PAUSE modes. 2. 3. 4. 5. 6. 7. 4 L.C.D These liquid crystal display (L.C.D.) indicate the track numbers, time (minute, second, frame), remain, pitch, beat, loop, auto cue single, continue and time bar. 9. +10 BUTTON Pressed the button to forward 10 tracks. If you forward 10 tracks, and the tracks over total tracks, the unit will jump to track 1. 10. DIRECT ACCESS KEY (0~10) To select the number of the track you would like to play. 11. SEAMLESS LOOP ( 2 set) There are A, B/LOOP/EXIT, RELOOP buttons. 1 A "start point" (A point) 2 B/LOOP "end point" (B point) Press B/LOOP/EXIT to set end point (B point) and start loop playback automatically. LOOP blinks on LCD. 3 EXIT To exit the loop playback, Press B/LOOP/EXIT to exit the loop playback. LOOP lights on the LCD. And the playback goes on from B point. 4 Return RELOOP: Return to the loop playback by pressing RELOOP. 5 Change "START POINT" & "END POINT" by pressing A & B/LOOP/EXIT in play mode. 6 The interval between A and B point must be more than 20 frames, or the B point will be canceled, then Loop function disappear, and LOOP fades on the LCD. 12. JOG WHEEL This contains various functions, as follows: *Speed Control Rotating the wheel, in play mode, will change the playback speed accordingly. While rotating clockwise, the playing speed increase; rotating counterclockwise, the speed decrease. *Searching Rotating the wheel in pause mode, the player will forward or backward to the desired point to start. The searching speed changed according to the dialing speed. It can be carried out by one frame increment. 13. RELAY Press the "RELAY" button to activate. When one unit is in play mode, and the other unit is in "pause" mode; pause the playing unit, the other unit will automatically start to play. 14. PROGRAM BUTTON You can program the track you want. While the unit is stopped, pressing the PROG button first to enter memorized mode, by pressing the skip buttons to select the tracks you want to order and then press the PROG button again to compete set up per track. The max tracks you can program are 30 tracks. While playing programmed tracks, the LED of PROG lights up. While the unit is stopped, eject disc or turn off the power, the program will be exited. 15. PITCH BUTTON With unit on the PITCH ON mode, to select the pitch range from 8%, 16%, which the LED indicator light up. With the unit on the PITCH OFF mode, it means playback speed is normal (0%). The playback speed will not change when you move the pitch control slider. 16. PITCH RANGE SELECT To select 8 % will assign +/-8 % (Red LED light up) to pitch control slider and so does 16% (Yellow LED light up). 17. PITCH BEND + / - BUTTON When CD player is playing, the pitch bend function allows the position of the bass beat to be matched after the pitch has been adjusted. The pitch will automatically rise up to + 16% from the current setting while pressing the " + "button. While pressing the " ­ " button, the pitch will automatically drop to - 16 % from current setting. By the way of changing the pitch the position of the beats can be matched. 18. BPM BUTTON To get the BPM number manually. 19. SEARCH BUTTON Pressing the button for quick forward or backward 20. PITCH CONTROL SLIDER To match the choices of playback speed (8%, 16%), you can choose what range you want between minimum (up side) and maximum (bottom side) by moving the pitch control slider. 21. SLEEP: Leave the unit unused for 30 minutes; the machine will shut off automatically. 8. 5 CONNECTION Function of the Rear Unit : 1. LINE OUT 2. 3. 4. 5. 6. 7. The audio from CD player is output from these jacks. DIGITAL OUT Digital output jack for connecting to D/A converter. TACT-LOCK option Select the type of switch in the mixer for FADER START wire remote control. RELAY JACK Used to connect the other CD player. REMOTE JACK Used to connect and control the CD player. AC INPUT Connecting this power cord into an AC wall outlet with the proper AC voltage. POWER Switch To switch the POWER on and off 6 BASIC OPERATION 1. Loading and ejecting the disc * Place a disc in the loader compartment with the label side up. * Push the disc into the loader. *Press the PLAY/PAUSE button to start the playback. * Press the EJECT button to eject the disc. 2. Track skip Use the TRACK SKIP control to advance ( ) or reverse ( ) to a desired track. 3. SEARCH CONTROL * JOG DIAL In pause mode, dial the jog, the playback will move by frame or frames depending on the speed you dial. * SEARCH BUTTON Press the SERCH button in play mode to move by minute. While, in pause mode, the SEARCH button activated, the search control moves by minute. 4. PITCH CONTROL KNOB * JOG DIAL In play mode rotate the job clockwise to speed up; rotate counterclockwise to slow down. * PITCH CONTROL KNOB Move the knob toward +16 direction, the playback become fast; move it toward -16 directions, the playback become slow. TROUBLESHOOTING Symptom When playback is started, stops or pauses immediately. Cause * Disc is loaded upside down. * Dust or dirt on the disc. * Output cables connected improperly. * Audio mixer operated improperly. * Pin plugs or amplifier terminals are dirty. * Player is in pause mode. * Incorrect connection. Sound is distorted * Pin plugs or amplifier terminals are dirty Cable connected improperly. Remedy * Load the disc with label side up. * Clean the disc and load it again. * Connect the cable properly. * Check the setting of audio mixer. * Press the PLAY/PAUSE button. * Connection with audio mixer to the LINE INPUT terminals. * Clean away the dirt. * Firmly connect all audio plugs. No sound Hum 7 ...