PLDVD132 OWNER'S MANUAL Mobile Video System EJECT AUX STOP MENU SUBTITLE AUDIO TITLE PBC REPEAT GOTO ANGLE SLOW DISPLAY OSD PLAY/PAUSE MUTE POWER A-B ZOOM ENTER 1 2 3 4 5 6 7 8 SETUP 9 0 +10 · · · · Multi-subtitle Languages Function Multi-audio Languages Function Multi-angle Function Parental Control www.pyleaudio.com FEATURES Compatible with PAL DVD (Video CD) and NTSC DVD (Video CD) This player can play discs recorded in either PAL or NTSC format. · A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder, video D/A converter, and audio decoders. · L/R stereo analog audio outputs for connection to existing head unit aux inputs. Video output is composite video. · Supplied remote handles multifunction software (multi-language audio-track/subtitle, multi-angle, multi-story, etc.), plus all basic functions. Use Authorized Service Centres Do not attempt to disassemble or adjust this precision product. Please refer to the Service Centre list included with this product for service assistance. For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. USE THIS PRODUCT SAFELY When Driving Keep the volume level low enough to be aware of road and traffic conditions. When Car Washing Do not expose the product to water or excessive moisture. This could cause electrical shorts, fire or other damage. When Parked Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback. Use the Proper Power Supply This product is designed to operate with a 12 volt DC, negative ground battery system (the regular system in a North American car). Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player. Failure to observe this may cause malfunction due to the precise mechanism of this unit. 2 CONTENTS Safety Information ........................................................................................4 Disc Notes .....................................................................................................5 Installation .....................................................................................................6 Electric Connection ......................................................................................7 Remote Control.............................................................................................8 Preparing the Remote Control......................................................................................9 Basic Operation ..........................................................................................10 On-Screen Display Function ......................................................................................11 Multi-audio Language Function .................................................................................11 Title Menu Function (For DVD only)............................................................................12 Multi-subtitle Language Function (For DVD only).......................................................12 Multi-angle Function (For DVD only) ..........................................................................12 MP3 Disc Play ............................................................................................................12 Using the FM modulator (For FM modulator version only).........................................12 Setup ............................................................................................................13 Initial Setup.................................................................................................................13 General Setup.............................................................................................................13 Speaker Setup............................................................................................................15 Audio Setup................................................................................................................15 Preferences Setup ......................................................................................................16 Defaults Table .............................................................................................................19 Specifications..............................................................................................20 3 SAFETY INFORMATION CAUTION: MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING: · TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. · TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES. · THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Region Management Information: This Mobile DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this Mobile DVD Player, this Mobile DVD Player cannot play this disc. 4 DISC NOTES Disc formats supported by this player DVD 12 cm disc (Single-sided disc only) Video CD 12 cm disc CD 12 cm disc MP3 12 cm disc Discs which cannot be played with this player · DVD-ROM · DVD-R/DVD-RAM · CDV · CD-G Handling and Cleaning · Dirt, dust, scratches and warping disc will cause misoperation. · Do not place stickers or make scratches on discs. · Do not warp discs. · A disc should always be kept in its case when not in use to prevent from damaging. · Do not place discs in the following places: 1. Direct sunlight 2. Dirty, dusty and damp areas 3. Near car heaters 4. On the seats or dashboard Disc Cleaning Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly moisturised with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc. Note: A disc may become somewhat scratched (although not enough to make it unusable) depending on your handle it and conditions in the usage environment. 5 Do not bend Do not touch the underside of the disc Note these scratches are not an indication of any problem with the player. Label side up VIDEO Wipe the disc from center toward the outside edge Preparing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown on the right. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc. Rough spots on outside edge Ball point pen or pencil Rough spots on inside edge INSTALLATION 6 6 Note: 1. First remove the two screws that locket the unit core, then attach the brackets on both sides of unit with screws (M4x6), last install the unit with screws (M5x25). 2. When fix the unit, you can slide the screw (M5x25) to left side or right side to meet your needed position. In the figure above, select 1 and 3 position to fix the bracket, and you can also select 2 and 4 position to fix the bracket. 6 ELECTRIC CONNECTION DVD PLAYER DC 12 V IN DC 12 V OUT _ + + REMOTE DIGITAL AUDIO A/V OUT L/R VIDEO BLACK BLACK YELLOW YELLOW VIDEO OUT RED AUDIO R OUT AC/DC ADAPTOR (OPTIONAL) (OPTIONAL) WHITE AUDIO L OUT DIGITAL AUDIO REMOTE CONTROL RECEIVER FUSE 3A CIGARETTE LIGHTER 7 REMOTE CONTROL 1 2 3 4 5 6 7 9 8 GOTO REPEAT MENU SUBTITLE AUDIO TITLE PBC ANGLE SLOW EJECT AUX STOP DISPLAY OSD PLAY/PAUSE MUTE POWER 13 14 15 16 17 18 19 20 21 A-B 10 11 ZOOM ENTER 22 1 2 3 4 23 5 6 7 8 12 SETUP 9 0 +10 24 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. AUX EJECT STOP MENU AUDIO SUBTITLE REPEAT GOTO / ZOOM / SETUP DISPLAY POWER 16. MUTE 17. TITLE/PBC 18. SLOW 19. ANGLE 20. A-B 21. / / / 22. ENTER 23. 0 - 9 24. +10 Press the AUX to switch to external Audio/Video input. (AUX is enabled in Disc Mode only) Press it to eject the disc from the disc compartment. Press it to stop playback. Press MENU to display the root menu of the DVD disc. Changing of the AUDIO soundtrack on multi-audio soundtrack DVD disc. Changing of the sound mode of the VCD/CD disc. Changing of the SUBTITLE Language on multi-subtitle language DVD disc. Switch the Repeat mode of DVD/VCD/CD disc Disc search button, cooperatively used with numeric buttons. Press to skip to the next track & press to skip back one track. Press it to zoom the picture in scale x1.5, x2.0, x3.0 Press to start forward rapidly & to reverse rapidly. Display the SETUP menu. Display statistical disc information during playback. Press POWER to turn the unit ON or OFF Press once to pause a play, press again to resume continuous playback. Press it to eliminate the sound immediate Display the TITLE menu that is stored in DVD disc changing between PBC ON and PBC OFF on the VCD disc. Changing for slow forward/reverse playback motion Changing of the view angle on multi-angle DVD disc Press it to repeat between two selected sports on DVD or VCD disc. Cursor buttons in MENU Mode. Note: For models without built-in FM Modulator, the / buttons can be used for volume up/down control. Confirm the Track/Chapter selected with the number key or selected with the cursor buttons on TV screen. Numeric buttons Press it to select 10th digits 8 REMOTE CONTROL PREPARING THE REMOTE CONTROL Inserting the Batteries 1. Remove the battery cover as the direction indicated by the arrow. 2. Put the batteries properly with the positive and negative terminals of the batteries are oriented indicated. 3. Close the battery cover. Using the Remote Control Face the remote control towards the player front face IR mark (remote control signal receiver). Operation angle: About ± 30 degree in each the direction of the front of the IR mark. To prevent damage to the unit, be sure to follow the connection diagram (page 7). 9 BASIC OPERATION 4 Note: For VCD, in any slow mode, press ENTER button to return to normal playback. Pause (still picture) during playback will stop Pressing play temporary. Return to normal playback, press once again. Repeat Press the REPEAT button to select repeat mode as follow. DVD: Press the REPEAT button to select repeat mode as follow. CHAPTER REPEAT ON TITLE REPEAT ON REPEAT OFF Loading a DVD/VCD/CD Disc 1. Turn the ignition on the accessory position. 2. Press the POWER button (1). 3. Insert the disc with printed side facing up into the disc slot (2). 4. The player starts playback automatically. Ejecting a Disc Press disc. (EJECT) button (3) to eject the VCD/CD: Press the REPEAT button to select repeat mode as follow. REPEAT OFF REP-ONE REP-ALL Stopping Play - Brief press the (Stop) button to stop the unit playback, when press the (Play) button it can continuous normal playback. - Press (Stop) button twice, it will stop the playback and go back to initial Track/Chapter. Rapid Forward/Rapid Reverse FF & REW during play. Press Each time the button is pressed, the speed of rapid forward/reverse changes according to the disc as follow. DVD/VCD/CD/MP3: Normal Playback 2X 4X 6X 8X 1. Continuously repeat at the current chapter/ track, when selected REP-ONE mode. 2. Select REP-ALL mode to continuously repeat all chapter/track on the current disc. 3. When the player finish playback the current disc last chapter/track, it will stop display the elapsed time. When selected REPEAT OFF mode (REP-ONE & REP-ALL disappear at the screen display). 4. REPEAT feature does not support VCD2.0 (with PBC ON). Aux input jack (4) When the unit connect external A/V you can press the AUX on the remote controller to switch to the aux input mode. Reset Reset button is placed on the front panel and must be activated with a ball point pen or thin metal object. Reset button is to be activated ...