PLTV64R OWNER'S MANUAL Mobile Video System COLOR LCD TV/RECEIVER WITH CD CHANGER CONTROL CONTENTS Important Safety Instruction........................................................................3 Installation .....................................................................................................4 Installation Hardware ..............................................................................................4 Mounting the Tuner Unit .........................................................................................5 Install the Display Unit ............................................................................................5 DIN Front-Mount.....................................................................................................5 DIN Rear-Mount......................................................................................................6 Electrical Connection ...................................................................................7 Operation .......................................................................................................8 Location and Function of Keys...............................................................................8 General Operation ................................................................................................10 Radio Operation....................................................................................................11 CDC Operation .....................................................................................................11 TV Operation.........................................................................................................12 Specification................................................................................................15 2 IMPORTANT SAFETY INSTRUCTION CAUTION: Please read and observe all warnings and instruction given in this owner's manual and those marked on the unit. Keep these instructions. Retain this booklet for future reference. Please read the following safety instructions carefully. 1. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit protect you if you observe the following procedures for installation, use and servicing. This unit doesn't contain any parts that can be repaired by the user. 2. The screen display is operated automatically. Do not draw the screen display out or turn it upward or downward manually. Otherwise, the mechanism construction may be harmed to some degree. 3. When you operate the display unit, do not touch the display by your hands. It may harm your fingers. 3 INSTALLATION Notes: · Choose the mounting location where the unit will not interfere with the normal driving function of the driver. · Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. · Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. · Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. · Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop. · If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance. 30° Double Sided Tape (2 pcs) Lever (2 pcs) Hexagonal Bolt (M6 x 12) (4 pcs) Tapping Screw (M5 x 12) (4 pcs) Mounting Bolt (M5 x 5) (8 pcs) Strap (1 pcs) Tapping Screw (M5 x 25) (1 pcs) Nut (M5) (1 pcs) · Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration. Plain Washer (M5) (1 pcs) Spring Washer (M5) (5 pcs) INSTALLATION HARDWARE Bracket (A) (2 pcs) Bracket (B) (2 pcs) Spring Washer (M6) (4 pcs) 4 INSTALLATION MOUNTING THE TUNER UNIT 2 at the sides of the unit chassis). For details, refer to the following illustrated installation methods. DIN FRONT-MOUNT Installing the unit 1 1 1 2 182 53 2 3 Step 1 4 6 6 5 7 3 8 5 7 3 8 6 5 7 4 (Fig. 1) 1. Dashboard 2. Holder After inserting the holder into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place. 3. Display Unit 1 6 4 2 3 7 5 Step 2 1. 2. 3. 4. 5. 6. 7. 8. Bracket (A) Mounting Bolt (M5 x 5) Bracket (B) Hexagonal Bolt with Washer (M6 x 12) Tapping Screw with Washer (M5 x 12) Spring Washer (M6) Spring Washer (M5) Double Sided Tape (Fig. 2) INSTALL THE DISPLAY UNIT Before install the display unit, please remove its tail screw and cable parts. This unit can be properly installed either from "front" (convertional DIN Frontmount) or "rear" (DIN Rear-mount installation, utilizing threaded screw holes 5 1. 2. 3. 4. 5. 6. 7. Dashboard Nut (M5) Spring Washer Tapping Screw with Washer (M5 x 25) Screw Plain Washer Strap Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle. INSTALLATION Removing the unit 1 1. Lever Insert the levers supplied with the unit into the grooves at both sides of the unit as shown in figure until they click. Pulling the levers upward and out to makes it possible to remove the unit. 1. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted), and tighten the screws at 2 places on each side. Use either truss screws (5 x 5mm), depending on the shape of the screw holes in the bracket. 2. Screw 3. Factory Radio Mounting Bracket 4. Dashboard or Console 5. Hook and Screw (Remove this part) Note: The frame, strap, and half-sleeve are not used for REAR-MOUNT. DIN REAR-MOUNT Installation using the screw holes on the both sides of the unit. 1 2 5 4 2 3 5 Fastening the unit to the factory radio mounting bracket. 6 ELECTRICAL CONNECTION RADIO/TV MAIN UNIT (VIEW FROM REAR) TV DIVERSITY ANTENNA INPUT RADIO/TV MAIN UNIT (VIEW FROM FRONT) AV INPUT AV1 AV2 CDC SET B RADIO CONTROL CDC INPUT VIDEO AUDIO­R AUDIO­L A (FOR RCA LINE VERSION ONLY) TO SELECT CD CHANGER'S SORT BLACK PLUG FRONT RCA CABLE REAR RCA CABLE TV CONTROL 75ohm RF WIRE (BLACK) FROM VIDEO/AUDIO SOURCE RADIO ANTENNA INPUT TV DIVERSITY ANTENNA INPUT TO CD CHANGER (BROWN) Rch RED (GREY) Lch WHITE Rch RED BLUE/WHITE POWANT Lch WHITE EXTERNAL REMOTE RECEIVER YELLOW MEMORY BLACK GROUND RED ACC DISPLAY UNIT TO POWER SUPPLY RADIO CONTROL TV MONITOR GREEN/BLACK VIOLET/BLACK WHITE/BLACK GREY/BLACK GREEN VIOLET WHITE GREY REAR Rch SPK FRONT Rch SPK CAUTION: 1. If the TV control grey cable is connected to car brake, when the car is running, you cannot switch into TV mode, and the button (2) or (OPEN/CLOSE) button (31) is unavailable. 2. To select CD changer's sort: Before installing the unit, connect the CD changer with the unit correctly and turn on the power to make the unit work in CD changer state. If the operation normally, the switch button's position is right, otherwise, please dial the switch button to the other position. Note: How to select A or B in CDC SET is different according to the units of the customers use. 7 REAR Lch SPK FRONT Lch SPK BLACK/GREY CABLE VIDEO OUTPUT BLACK CABLE GREY/BLACK CHOKE BOX GREY GREY PLUG OPERATION LOCATION AND FUNCTION OF KEYS 6 1 14 7 5 4 3 2 11 12 8 13 17 18 19 15 20 21 16 9 4 10 8 OPERATION LOCATION AND FUNCTION OF KEYS 30 22 23 24 27 37 38 26 25 31 36 34 32 33 35 29 28 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. PWR MUT LCD T/F SEL VOL VOL RESET IR BND MOD TUNE/SKIP TUNE/SKIP M1 ~ M6 AS/PS CD + CD ­ RPT 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 9 SCN RND TV/AV 0 ~ 9 Numeric Buttons -/-- Digital Selecting Button MUTE DSP (=SCREEN DISPLAY) SORT CH + CH ­ POWER (OPEN/CLOSE) VOL + VOL ­ ANGLE ADJ. + ANGLE ADJ. ­ MENU / / OPERATION GENERAL OPERATION · ON/OFF Switch on the unit by pressing PWR button (1). When system is on, press it again to turn it off. · SELECTING SOUND MODE Press SEL button (6) to move display through volume, bass, treble, balance and fader functions. Use VOL (7) and VOL (8) buttons to adjust the selected mode. When mode has not been adjusted for several seconds, display returns to previous display status (e.g. radio display or CDC display). VOL (Volume) BAS (Bass) TRE (Treble) BAL (Balance) FAD (Fader) By pressing MOD button (12), you can select desired playing mode among TV, radio and CDC. CAUTION: The unit cannot be switched into TV mode, when the car is running. So at this time, you just select playing mode between radio and CDC. · MUTE Press MUT button (3) to cut down sound output, "MUTE" will appear on the display. Press it again to resume the previous volume mode. · SETTING THE CLOCK Press T/F button (5) to change the display into clock display. While the current time is appeared on the display, press it again to return to frequency showing. Time Setting - Set hours: Holding down T/F button (5) for several seconds, and the clock is blinking on the display, press TUNE/SKIP button (14) to adjust the hour. - Set minutes: Holding down T/F button (5) for several seconds, and the clock is blinking on the display, press TUNE/SKIP button (13) to adjust the minutes. · LIQUID CRYSTAL DISPLAY The LCD (4) can show the current state of the unit. · RESET Reset button (9) must be activated with either a ball point pen or thin metal object. The reset button is to be activated for the following reasons: - Initial installation of the unit when all wiring is completed. - All the function buttons do not operate. - Error symbol on the display. 10 Volume Adjust volume level using VOL and VOL (8) buttons. (7) Bass Press SEL button (6) for one time. Adjust bass level using VOL (7) and VOL (8) buttons. Treble Press SEL button (6) for two times. Adjust treble level using VOL (7) and VOL (8) buttons. Balance Press SEL button (6) for three times. Adjust sound balance between left and right speakers using VOL (7) and VOL (8) buttons. Fader Press SEL button (6) for four times. Adjust sound balance between front and rear speakers using VOL (7) and VOL (8) buttons. · SELECTING PLAYING MODE When the screen display is drawn in, press MOD button (12) to select desired playing mode between radio and CDC. When the screen display is drawn out, the unit will automatically switch into TV mode. OPERATION RADIO OPERATION · SELECTING BAND Press BND button (11) to change between three FM bands and two AM bands and one LW band. Each band stores up to six preset stations. FM1 FM2 FM3 AM1/MW AM2/LW · SELECTING STATION During radio mode, press TUNE/SKIP button (13) to increase frequency or TUNE/SKIP button (14) to decrease frequency by one step of channel spacing. Hold the button longer for fast tuning. The frequency is updated correspondingly on display. · SELECTING MEMORY Press preset memory buttons (15) to preset stations at tuner mode. With this system, a total of 30 stations can be stored in the memory of six buttons. The stations might be FM1, FM2, FM3, AM1/MW and AM2/LW band. The operation is as below: - Store in Memory Press and hold desired memory location button for several seconds. The current listening station will be stored into the number button. - Retrieve a Preset Station Press any one of the buttons (15) to retrieve a station which had been stored in the memory in advance the chosen number is shown on display. · AUTO MEMORY STORING & SCANNING - Auto Memory Storing Seeks the six strongest stations in the pre-selected band automatically and stores the stations automatically in preset memories. Initially the tuner seeks and memories the stations in local mode until 6 stations are fully occupied. Otherwise, seeking is proceeded in distance mode. 11 - Auto Memory Scanning Check the stations stored in the preset memories. Press to retrieve automatically the current stations stored in six preset memories and it will display for several seconds. Press either the AS/PS button (16) again or anyone of the memory buttons to stop the scan operation. During the preset scan operation, the channel number flashes on the display for several seconds. Preset station scan continuously in the pre-selected band. CDC OPERATION · SELECTING TRACK During CDC mode, press TUNE/SKIP button (14) or TUNE/SKIP button (13) to move to the previous track or the next track. The track number shows on the display. · SELECTING CD Press CD + button (17) to select next disc and CD ­ button (18) to select previous disc. · REPEAT THE SAME TRACK Press RPT button (19) to continuously repeat the same track on the current disc. Press it again to continuous ...