DVD Player Operating Instructions PLTVD122 NOTES Any change to the design and specifications will not be advised. Before attempting to connect, or operating this product. Please read the instructions completely Important Precautions Table of content The design and manufacture of this player takes personnel safety in to consideration. However, any improper operation may result in electric shock, fire and other hazard. So Please adhere to following precautions. 1 DVD features _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Names of parts 1 Safety precautions There is dangerous voltage inside this product, do not open the cabinet by yourself to prevent electric shock. Any service please contact professional technician to perform. Replacement shall apply the components recommended by the manufacturer; To prevent electricity leakage or damage, do not spill liquid,alcohol in the product; Do not drop anything into the product from ventilation hole of the cabinet or any other opening, to prevent electricity or damage; To power the player must be in line with the mark in the rear panel; When the plug of the unit is commented to the mains outlet, the unit will be still connected to AC even of the power is turned off. To prevent damage caused by lightening, when you are not going to use this product, please shut off the power; You should clean the cabinet with dry, soft cloth only after the power is turned off. 2.1 Frontal panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2.2 Rear panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2.3 Remote control _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ______________ 2 2 2 3 3 Preparation before operation ________4 3.1 unpacking and check _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 3.2 assembling batteries of remote control _ _ _ _ _ _ _ 4 3.3 connections _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Play _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Mute __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Stop playing _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The use of REMOTE SENSOR _ _ _ _ _ _ _ _ _ _ _ 8 9 9 9 4 Basic operations _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 5 Frequent operations _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Select content to be played with menu _ _ _ _ _ _ _ _ 10 Play fast forward _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Play fast backward _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Slow play _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ __ _ _ _ 11 Skip to next chapter/track _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Skip to previous chapter/track _ _ _ _ _ _ _ _ _ _ _ _ 11 Select track _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ __ _ _ 11 Display track List _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ 11 Repeat play_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12 Select Subtitle language _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12 Program play _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ 12 Display playing time and state _ _ _ _ _ _ _ _ _ _ _ _ 13 MP3 operations _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ 13 Operating precautions Place the product levelly where there is little dust and good ventilation condition; Prevent the product and its supplied remote control from moisture, heating,vibration or direct sunlight; Condensation caused by moisture may happen to the lens inside the product, it will affect the play effect. In such case please turn on the power (unload the disc) to operate it for 1~ 2 hours, vaporize the condensation with the home-grown heat; Do not turn on/off the product frequently. After you turning off the product, please wait for about 10 seconds prior reopening it. Do not play the broken, scratched or twisted discs; Please do not put anything other than discs into the tray; When the disc is improperly loaded, please do not force. 6 System setting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15 Example 1:Set TV screen ratio mode _ _ _ _ _ _ _ _ _ _ 15 Example 2:Set sound mix output mode _ _ _ _ _ _ _ _ _ 16 Example 3:Coaxial output _ _ _ _ _ _ _ _ _ _ _ _ _ _ 17 Example 4:Set age control grade _ _ _ _ _ _ _ _ _ _ _ _ 18 Example 6:Set operation indication or menu display language_ 18 Table of content 1. DVD features 7 8 9 10 Functions of buttons in remote control _ Technical terms _ _ _ _ _ _ _ _ _ _ _ Troubleshooting _ _ _ _ _ _ _ _ _ _ _ Specification _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 20 24 24 25 It provides this multi-media disc player high-resolution image with, high-quality sound and surround sound effect. The DVD player can play not only DVD discs of various versions, but also VCD, SUPER-VCD, DVCD, CD,MP3,etc. DVD features Features 1. It is compatible to DVD, VCD, SUPER-VCD, DVCD,CD, MP3, etc. 2. Multi language on screen menu. 3. High quality image with over 500 lines horizontal pesolution. Other features 1. Dts digital output, provides high-fidelity stereo interface. 2. Multi-language support. DVD supports up to 32language caption and 8-language dub. 3. Multi-angle. The user can select different angle at their option to watch, e.g. closer angle, full view, etc. 4. Multi-image ratio. multi-image ratio mode enables the product to match different types of TV screen. 1 Names of parts 2. Names of parts 2.3 Remote control 2.1 Front panel 1 13 14 Names of parts 1.POWER ON/OFF 2.DISK TRAY 3.OPEN/CLOSE 4.LCD DISPLAY 5.PAUSE/PLAY 6.PHONE 7.STOP 8.AUDIO R 9.AUDIO L 10.VIDEO 11.MENU 12.PREVIOUS 13.NEXT 14.DIRECTION KEYS 3 14 2 4 10 9 2 3 15 4 5 6 7 8 1 6 11 16 17 18 19 20 21 22 23 24 25 26 7 12 13 5 8 9 10 11 2.2 Rear panel 1 8 12 1.COAXIAL 2.S-VIDEO 3.VIDEO 4.AUDIO L 5.AUDIO R 6.REMOTE SENSOR INPUT 7.POWER 8.RF IN 1.MENU PBC 2.POWER 3.NUMBER 4.SUBTITLE 5.DISPLAY 6.AUDIO 7.ANGLE 8.SETUP 9.ENTER/SELECT 10.DIRECTION KEYS 11.DVD/GAME(DVD/TV/ GAME) 12.VOLUME 7 2 6 3 4 5 13.TITLE 14.EJECT 15.CLEAR 16.SLOW 17.PROGRAM 18. MUTE 19.REPEAT 20.ZOOM 21.PLAY PAUSE 22.STOP 23.FORWARD 24.BACKWARD 25.NEXT 26.PREVIOUS NOTE: THE 8 (RF IN) TERMINAL USED ONLY DVD WITH TV TUNER MODEL. 2 3 Preparation before operation 3. Preparation before operation 3.3 Connections Names of parts 3.1 Unpacking and check Check for the following Accessories: Remote control 1 choke 1 Hanger 2 Screw The video signal is output through s-video or video output terminal, while audio signal is output by mixing channel terminal, coaxial terminal, dts signal is only output through or coaxial terminal. There are many solutions to connect TV and this product, user can select one according to the condition of the apparatus to be connected. However, be aware to shut off all power prior connection. DVD+TV TV S-VIDEO VIDEO L R Battery 2 Audio/Video cord YELLOW WHITE 3.2 Assembling batteries of remote control Open battery compartment , Insert two 7#A batteries, make sure to match "+" and "-" of the batteries to the marks in the battery compartment. While operating remote control, please point it to the frontal panel of the DVD player. S-VIDEO VIDEO L R D DV r ye Pla RED S-video terminal Owner's manual 1 Remote sensor Plug one end of S-video cable into S-VIDEO socket in back panel of the product, the other end into TV S-VIDEO socket, then connect audio cable to TV (notes:do not connect video cable) . See diagram blow. DVD player+TV TV WHITE RED 4 5 Preparation before operation Preparation before operation DVD+AC Power connection drawing while operating in room Connect AC adapter to +12V input When you turn off the car's power supply by key (ACC), the unit will be turn off and can remember the latest picture. When you turn on the IGNITION SWITCH again and play DVD, the unit will play from the memory point. When you turn off the car's power supply by key (ACC), and want to take away the disc, you can turn on the unit's power supply by push [POWER] on the unit or remote control, and take away disc, then turn off the unit's power supply. If you forget turning off the unit's power supply, the unit can turn off automatically after 30 second. 12V remote out It provides the power of DC 12V/0.5A when power of the product is on. If you turn off power of the product, it will have no output. ADAPTOR DVD+AMP AMP S-VIDEO VIDEO L R -110V 60Hz UP ADAPTOR WIRE YELLOW WHITE RED DVD+CHOKE Power connection for automotive application DVD WITH TV TUNER + ANTENNA (THIS CONNECTED ONLY USE IN DVD WITH TV TUNER MODEL) ANT CHOKE +RED +12V CAR DC12V Note: It is recomended to connect to car battery. -BLACK Ground YELLOW BLUE ACC(IGNITION SWITCH) REMOTE OUT 6 7 Basic operation 4. Basic operation If you have connected the product to TV, all power lines have been plugged into receptacles, and loaded the batteries into remote control, so you can play the player. Turn on TV power If you have connected amplifier, you should also turn it on, and select proper amplifier mode according to the type of discs to be played. playback, push [ play ] again to resume Basic operation Mute (available to analog audio output Signal only) Push [MUTE] to silence the sound of the player, press it again to return to normal state. Play 1. Push [POWER] in the player. Control TV remote control to shift TV to proper video input mode (VIDEO IN). 2. Push open/close eject player or [ EJECT] buttons on the remote control to the tray. Load a disc in the tray, with label side upward (see following figure), place single disc in the tray, 3. Push [ ] PLAY/PAUSE The player will close the tray automatically and begin to read it, It can identify different disc format then display it on the screen of DVD frontal panel, afterwards if automatically plays disc, If directory or menu picture disply in the screen, you can push the direction buttons [UP], [DOWN],[LEFT] and [RIGHT] buttons in the remote control to move lighting band to desired track, You can directly push number buttons to select track. While playing push [ ] to pause the Stop playing EJECT 1. Push [EJECT] unload the disc until the tray is ejected. After stopping playing, unload the disc until the tray is ejected. 2. Push [EJECT] to close the tray 3. Press [POWER] to turn off the player. Then turn off power of all connected equipment. Attention: While playing if you find the picture is not shown in full screen or some part hidden or black and white image occur,you need to the system, please select right TV system (PAL or NTSC), Please refer to instructions of [SYSTEM] IN CHAPTER 6 or examples in chapter 6. When the symbol shows in TV screen, it signifies invalid operation or your operation is not accepted by the player. The use of REMOTE SENSOR If you want to put the DVD player in where you can not see, please insert REMOTE SENSOR in the REMOTE SENSOR INPUT, and put REMOTE SENSOR on where you can see in automobile, you can control the DVD player so long as let REMOTE CONTROL toward REMOTE SENSOR. REMOTE SENSOR 8 9 Frequent operation 5. Frequent operation We will introduce some regular operations of different types of function, the user can perform one or more operations as you like, In addition chapter 7details purposes and operations of all buttons Frequent operation Play fast backward While playing you can push [FB] button to play fast backward. Four speed are available to play forward, press it once the speed grows by one shift, when the speed reaches maximum speed, press [FB] again to return to normal state. Slow play While playing push [SLOW] to play slowly at different speed. You can play slow forward or backward, three shift speed are available for either of them. Push [SLOW] once, press it once the speed decreases by one shift, finally it returns to normal state. Select menu part to be played with MENU PBC If DVD disc to be played has menu, when PBC. state is on you can display the menu by pushing [MENU/PBC] or [TITLE], whereon you select a popular part to play. you can operate following procedures 1.Push [MENU/PBC] The screen display menu picture, the content to be selected varies with different disc. 2.Push [UP], [DOWN], [LEFT], [RIGHT] Move the lighting band to the desired item or Made by pushing these buttons 3. Push [ENTER] to confirm selecting the item This moment the screen may display a submenu. You can also push [UP], [DOWN]. [LEFT], [RIGHT] to confirm selecting the push [ENTER] to comfirm the selection ENTER Skip to next chapter/track While playing push [NEXT] button. Skip to previous chapter/track While playing push [PREV] button. Select track There are more than one operation procedure available A.Push [NEXT] or [PREV] to skip to the next or the previous track and play. ! B.For those discs with track numbered directly push number buttons to enter the No. of desired track to play. If the moment the screen displays , so there may be three possible reasons:(1) the track in the disc is not numbered; (2) the number entered beyond the scope; (3) PBC is on (push [PBC] to shift PBC state); C.Select among the song track list (refer to the next chapter). Play fast forward While playing you can push [FF] button to play fast forward. Four speed are available to play forward, press it once the speed grows by one shift, when the speed reaches maximum speed, press [FF] again to return to normal state. Display the track list For DVD discs, when PBC ...