User manual PYLE PLVIN70 - Instruction Manual

IN-DASH 7 INCH TFT LCD MONITOR INSTRUCTION MANUAL Thanks for your purchase of various displays produced by our company. In order to take the full advantage of this unit and ensure its long-term trouble-free use, please read and obey this manual carefully. 1.Do not repair it by yourself ,if any trouble occurs ,please immediately shut it off and contact our company or local dealer .This monitor is composed of many precise electronic components ,any detachment or reassembling may result damages to the set. 2.Do not expose the monitor to humid air ,dust ,vapor ,sunlight ,etc. 3.Do not use thinner or any other chemical cleaner .Please choose soft cloth 4.Keep the monitor for extremely heating or cooling places. Storage temperature :-25~+60 oc Operating temperature :-10-+50 oc 5.Prevent the set from falling or struck Caution To ensure security ,please do not operate the monitor while driving. Remote Control Operation 1 2 4 8 9 3 5 6 7 1)Power button 2)Timer 3)Personal preference 4)Decrease button 5)Mute 6)Memory 7)Picture invert(up ,down ,left ,right) 8)Increase button 9)Menu button Operation 1.Press the open button and to open the screen 2.Draw the screen along the horizontal direction until it can not slide in this dire direction +/-30 o Flip vertical 120 o 3.Upturn the screen ,the maximum angle is 120 o 4.Adjust Angle :Horizontal :+/-30 o Vertical:0~120 o 0~120 o Instruction for Panel Funxtions 2 10 1 3 4 5 11 12 13 14 9 6 7 8 1.Open button 2.Power button 3.Clock/Calendar Adjuster Button(-) 4.Clock/Calendar Selection Button 5.Clock/Calendar Adjuster Button(+) 6.Decrease(-) 7.Menu 8.Increase(+) 9.Remote Control Window 10.Day Display 11.Year Display 12.Month Display 13.Date Display 14.Time Display Installation and Connection Video l Video ll Fuse(15A) Yellow Black Battery Negative(Ground) Red Wire to Acc Blue wire connect to reverse light (For connect reverse camera use) Operation method Auto power off :Fold the display screen and push it into the box till a Click is heard .The display will be automatically powered off. Power on :Press Open Switch from the panel to eject the display screen, then pull it out and adjust the screen to display sight manually. Press Power Switch on the panel to turn on the power. VCD or DVD signal will be displayed now .If no signal ,it will be displayed in blue screen. Stable color picture can only be obtained when disc player and the display are at the same system .Please switch over the system in case on color signal is obtained . Watch :Based on the individual demand ,adjust the parameter and view angle with reference to the description on functional keys. 1.Press MENU key " "or " "to adjust them 2.Press P.P key to select the ideal image quality from the 5 press modes MILD CUSTOM VIVID STANDARD BRIGHT Clock Adjusting Method: Press Selection/Confirm Key ,and press + or "-"key while the display is flashing (about 8 s);sdjust the time correctly ,then press or wait for 8 s to store the adjustment. Remote Control replacing batteries PULL OUT PUSH 1)Always use new batteries when replacing the old set. 2)Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries. 3)Battery replacement is necessary when remote control acts sporadically or stops operating. 4)Do not drop, apply shock or step on the remote control. 5)Do not spill water on the remote control. 6)Do not place objects between the remote control and remote sensor. 7)Do not use remote control for other equipments at the same time. 8)If the MONITOR does not operate even when operating the remote control from a close range, it is time to replace the batteries(use CR-2025), refer to the label on back of the basic control. Technical parameters LCD Drive Method: TFT Active Matrix Display Size: 7 Inch(diagonal) Aspect:16:9/4:3 Selectable Display Format :480 x RGB x 234 Number of Pixels :1440 x 234 Video System Input :NTSC/PAL Auto-select Back Light :High Brightness Type U Shaped CCFT Power Source:DC12V Current Consumption:8W Dimensions (H x W x D):49 x178 x 160(mm) Supplied accessories Main Set Remote control Screw and Keys Manual Spare Frame 1 1 2 1 1