1 TABLE OF CONTENT 1. INS TALLATION GUIDE 2. FUNCTION KEYS 2.1 FUNCT IONS OF FRONT PANEL 2.2 FUNCT IONS OF REMOT E CONT ROL 3. TROUBLE S HOOTING 3.1 NO POWER 3.2 NO FUNCT ION OF REMOT E CONT ROL 3.3 NO DISPLAY OR NOT CLEAR 4. ACCES S ORIES 5. S PECIFICATIONS 2 1. INS TALLATION GUIDE 1. On a towel or soft cloth, gently place the monitor unit "facedown" on a stable work surface. 2. Locate the pigtail with the DIN connector. 3. Connect the DIN connector to the interface cable provided. 4. Connect the RED wire th the positive (+) battery terminal. 5. Connect the Black wire to a chassis electrical ground point. 6. Connect the cable with YELLOW RCA jack to Video Input sources for your Video Program material. 7. In case of Video Output, connect an RCA-RCA cableon the interface cable box. 3 2. FUNCTION KEYS 2.1 FRONT PANEL OF FUNCTIONS 2.2 FUNCTIONS OF REMOTE CONTROL POWER MENU Up/Dn , ,Inc/Dec Press the POWER button once it will be power ON. Press it again, the will be power OFF. See OSD controls Press or to adjust Using On-Screen Display (OSD) Controls You can adjust the display settings using the on-screen display (OSD) program. 4 Navigating the Menu Press the Menu button on the front panel of the monitor to launch the OSD program. The OSD program contains four menus: Colour Picture Function OSD Menu Miscellaneous Exit Keep on pressing the Menu button to switch between the four menus While in a menu, press the Select button to highlight and select an option. When an option is selected, press the button or button to adjust the value. When you complete your settings, the OSD menu will automatically disappear after 15 seconds, and any changes you have made will be saved. Described below are the functions you can select and adjust in the OSD menu. Auto Adjust If set to YES, the values of the following items in this menu will be automatically adjusted to the most optimal settings. If set to NO, auto adjust will not execute. Auto Position If set to YES, it will adjust the 5 display area to an adequate position and fitting the full screen. If set to YES, auto position will execute. Auto Phase adjusts the ADC sampling clock phase relatively to the source video Hsync signal. This is for minimizing video distortion or jitter. If set to YES; auto phase will execute. Auto Clock adjusts the number of pixels from the source video. The correct value is equal to the horizontal total of the source video. This is for minimizing any vertical bars or stripes visible on the screen background. If set to YES; auto clock will execute. Auto Colour auto adjust the RGB colours and balancing the colours to the preset mode. If set to YES; auto colour will execute. Picture Adjustment H. Position moves the image rightward (with the + button) or leftward (with the - button). The values range from 0 to 157, and the default setting is 29. V. Position moves the image upward (with the + button) or downward (with the -button). The values range from 0 to 23, and the default setting is 9. Sharpness moves the image upward (with the + button) or downward (with the -button). The values range from 1 to 5, and the default setting is 3. 6 Phase moves the image upward (with the + button) or downward (with the -button). The values range from 0 to 31, and the default setting is 31. Clock moves the image upward (with the + button) or downward (with the -button). The values range from 1 to 200, and the default setting is 100. Colour Adjustment Contrast adjusts the image"s contrast. The values range from 0 to 100, and the default setting is 50. Brightness adjusts the image"s brightness. The values range from 0 to 100, and the default setting is 50. Gamma Correct adjusts the image"s brightness. The values range from 0 to 3, and the default setting is 0. Colour Adjust you can adjust Red, Green, Blue colour respectively to set your preferred colour temperature. The values range from 0 to 100, and the default settings are 50. Miscellaneous Signal Source basically Input source D-sub is for PC. Additional some model video / TV inputs for optional usage. Moves the menu rightward (with the + button) or leftward (with the - button). 7 Mode Select there are two select modes. The default mode is 720 x 400 Reset cancels all settings you have changed and restores the default settings of the OSD menu. Volume Moves the menu rightward (with the + button) or leftward (with the - button) to adjust the volume of the computer. OS D Menu Language allows you to choose the desired language in the pop-up submenu. Use the + button or - button to choose: English, German, French, Italian, Spanish, Chinese traditional, Chinese simple and Japanese. The default is English. OSD H. Position moves the menu rightward (with the + button) or leftward(with the button). OSD V. Position moves the menu upward(with the + button) or downward(with the - button). OSD Timer the default setting is YES; if no button pressed, OSD menu will fall away after 20 seconds later. If setting is No; OSD will remain on the screen. Translucent default is Yes; means that OSD menu is translucent, can see through slightly. 8 3. TROUBLE S HOOTING 3.1 NO POWER 1. Make sure the power cable has been pluged in. 2. Make sure the plug has 12V~14V, may use another electrical appliance to test it. 3.2 NO FUNCTION OF REMOTE CONTROL 1. Make sure the batteries are in good condition and installed properly. 2. Make sure the remote control is aiming at the receiver, and there are no obstacles in between. 3. Perhaps, it is too far away from the receiver. Normal distance is within 7 meters. 3.2 NO DISPLAY OR NOT CLEAR 1. Check the video signal wires if they are connected properly. 2. Check the antenna or adjust it. 3. Make sure the TV/Video being in proper position. 04. ACCES S ORIES PS2/CAR CABLE INSTALLAT ION BRACKET SCREW PACK REMOT E CONT ROL USER MANUAL 5. S PECIFICATIONS 9 ITEM LCD Panel: Viewing Angle Resolution: Display Colors: Pixel Pitch (mm): Backlight Unit Contrast Ratio: Brightness (cd/m2): Display Area (mm): Power Supply: Power management: User's Control: System Dimension (mm): Weight Safety certifications Environmental Condition: DES CRIPTION 15.0" TFT, 0.297mm, TTL -60~60 degree (H), -55~45 degree (V) 1024 x 768 (XGA) 800 x 600 (SVGA) 640 x 480 (VGA) 16.7 M (8 bits/color) 0.297 (H) x 0.297 (V) 2 Edge-light CCFL, Replaceable. 350:1 250 304.1 (H) x 228.1 (V) DC 12Vl Power on mode:Current less than 2A Power on/off, OSD control 1.Auto detection between NTSC/PAL. 2.SCEAM is available. 390(L) x 365 (W) x 45 (D) 3.8 Kg UL, FCC, CE, TUV , Operation Temp.: 0~50 degree C StoStorage Temp.: -20~60 degree C Humidity: 10~90% · Recommend for use with PYLE' PLVWH1 wireless headphones. S 10 ...