HPR Series HPR122i | HPR152i | HPR153i | HPR151i | HPR181i Features · TheonlyportablepoweredspeakerswithlegendaryQSC amplifierpowerandreliability · Powermodulesbasedonbest-sellingRMXseries amplifiertechnology · Highcontinuouspower:Subwoofers­700watts, full-rangemodelsupto600wattstotalamplifierpower · Attractiveandprofessionalappearance · Ruggedbirchenclosures · Tour-grade16gaugesteelgrilles · Ergonomichandleswithcomfortable,non-slipgrip · 35mmpolesockets(subwoofersand2-waymodels) · Subwoofermodelsincludestereocrossoverwithoutputs forpoweredsatellitespeakers · M10riggingpointsforsuspendedinstallationonmodels HPR122i,HPR152iandHPR153i PoweredLoudspeakers The HPR Series offers performers the power, technology and legendary reliability of QSC amplification combined with the simplicity and convenience of powered loudspeaker systems. Whether your application is vocal reinforcement, dance music or full-tilt rock and roll sound, there's an HPR speaker system for you. Every HPR model is built around a high-power, reliable QSC power module using the same top-quality components and design standards as QSC RMX Series amplifiers. Thick aluminum heat sink extrusions with deep fins provide mechanical strength and plenty of surface area to keep the module running cool. While many powered speaker amplifier modules use low-cost "chip amps", the HPR Series features discrete component designs that deliver the best possible performance even when pushed to the limit. The power modules incorporate sophisticated signal processing functions carefully tailored to the loudspeaker system. Each amplifier channel includes its own limiting with the parameters individually optimized for the frequency band. All HPR models are constructed of rugged birch. The speaker components are protected by a heavy 16 gauge perforated steel grille with a distinctive and professional appearance. A grille-mounted power LED may be disabled by means of a rear-panel switch when desired. The HPR122i, HPR152i and HPR153i also feature integrated M10 suspension points for installed applications. The multipurpose HPR122i is equally at home as a stage monitor or main PA speaker. With available accessories, it may be pole or yoke mounted or flown in a vertical or horizontal orientation. A 12" low-frequency woofer with 3" voice coil is powered by 400 watts of Class H power. A neodymium magnet design provides ample motor strength for low end performance without adding unnecessary weight. The 1.4" diaphragm neodymium compression driver is powered by a 100 watt, Class AB+B amplifier and is loaded on a 75º conical horn. It's the same highfrequency driver you'll find on the HPR153F 3-way loudspeaker system. A total of 9 threaded M10 inserts allow for several different suspension options and use with an optional yoke mount. The bi-amplified 15" 2-way HPR152i is a versatile speaker that is at home in nearly any sound reinforcement setting. A high-power low-frequency driver with a 3" voice coil provides extension down to 48 Hz. The 1.75" (diaphragm) compression driver on a 90° x 60° horn delivers smooth high frequencies up to 20 kHz. The power module includes a 100 Hz low-cut filter for use in subwoofer equipped systems. Three threaded M10 inserts allow for vertical suspension. The HPR153i 3-way loudspeaker is a great choice when the warmth, clarity and projection of a horn-loaded mid-range design is desired. The 15" low-frequency driver provides extension down to 36 Hz while the 6" mid-range driver seamlessly handles the critical vocal region. A 1.4" (diaphragm) compression driver delivers brilliant top end response. Three threaded M10 inserts allow for vertical suspension. For high-level dance music or reinforcement of bass instruments and kick drum, an HPR Series subwoofer will add low-frequency extension and power to any sound system. Both HPR subwoofers use a 700 watt QSC amplifier. Flexible input signal processing and connectivity allow the subwoofers to be used in systems consisting of a single sub and two tops or larger systems employing multiple subwoofers. The signal processing complement includes a stereo electronic crossover with XLR line-level outputs for connection to any powered 2-way or 3-way mid/high speaker. When the requirement is for compact size and tight, punchy low end, the single 15" HPR151i subwoofer is the answer. The HPR151i is capable of producing 133 dB peak SPL with frequency response down to 43 Hz and sound quality that rivals many 18" subwoofers. A top mounted 35mm pole socket is provided. The HPR181i single 18" subwoofer offers truly impressive low-frequency extension and output. The 4" voice coil driver produces 134 dB SPL peak, at 1 meter with frequency response down to 39 Hz. The HPR181i also includes a top mounted 35mm pole socket and heavy-duty 3" casters to facilitate load-in and load-out. HPR Series Loudspeaker Specifications HPR122i Configuration Transducers Low-frequency Mid-frequency High-frequency Frequency Response (-3 dB)1 Frequency Range (-10 dB)1 Nominal Coverage (-6 dB) Maximum SPL (1 meter) Amplifiers Power Output 12" 2-way multipurpose loudspeaker 12" neodymium transducer with 3" voice coil 1.4" diaphragm neodymium compression driver 62 Hz ­ 18 kHz 53 Hz ­ 22 kHz 75° conical 131 dB peak 400 W LF Class H 100 W HF Class AB+B 22k balanced / 11k unbalanced Gain · Low-cut filter (Main/Monitor) Front LED On/Off · Power · Circuit breaker Power · Signal · Limit Convection HPR152i 15" 2-way full-range loudspeaker 15" cone transducer with 3" voice coil 1.75" diaphragm compression driver 54 Hz ­ 17.5 kHz 47 Hz ­ 20 kHz 90° x 60° 135 dB peak 400 W LF Class H 100 W HF Class AB+B HPR153i 15" 3-way full-range loudspeaker 15" cone transducer with 3" voice coil 6.5" horn loaded mid-range 1.4" diaphragm neodymium compression driver 41 Hz ­ 17.5 kHz 36 Hz ­ 20 kHz 90° x 40° 134 dB peak 400 W LF Class H 100 W MF Class AB+B 100 W HF Class AB+B Input Impedance () Controls Indicators Cooling Amplifier Protection Current consumption at 120 VAC (1/8 power EIA noise) Enclosure Finish Grille Suspension / Attachment Points Connectors Dimensions (HWD) Weight (Net) Available Accessories See descriptions below Gain · Low-cut filter · Front LED On/Off · Power · Circuit breaker Thermal and Output Limiting · Output Short Circuit · Overtemperature Muting · Driver DC Protection 1.5 A Painted birch plywood Black textured paint Powder coated 16 gauge steel 9 M10 rigging locations 3 M10 rigging locations 3 M10 rigging locations Balanced female XLR line level input · Balanced male XLR full range line level out 26.9" x 14.7" x 14.9" (683 mm x 373 mm x 379 mm) 60 lb / 27.2 kg HPR COVER 122 · HPR POLE 31 HPR YOKE 122 · HPR M10 KIT · HPR SUS KIT 122 33.6" x 19.1" x 17.9" (853 mm x 485 mm x 455 mm) 100 lb / 45.5 kg HPR COVER 152 · HPR POLE 26 HPR M10 KIT 45.1" x 19.1" x 17.9" (1144 mm x 485 mm x 455 mm) 118 lb / 54 kg HPR COVER 153 HPR M10 KIT 1.5 A 1.8 A HPR POLE 26 ­ This 35 mm diameter speaker pole is 26 inches long and is designed for pole mounting the HPR152i on top of the HPR151i or HPR181i subwoofers. The HPR152i should not be mounted on a speaker pole longer than 26 inches when used with the HPR subwoofers. HPR POLE 31 ­ This 35 mm diameter speaker pole is 31 inches long and is designed for pole mounting the HPR122i on top of the HPR151i or HPR181i subwoofers. The HPR122i should not be mounted on a speaker pole longer than 31 inches when used with the HPR subwoofers. HPR YOKE 122 ­ This steel yoke bracket is designed to mount the HPR122i vertically from a variety of structures while allowing tilt rotation. It is compatible with several different attachment methods and can be fitted with a third party speaker pole receptacle. It is not recommended to surface mount the HPR122i on a wall. Specifications subject to change without notice. Subwoofer Specifications | Control Panels HPR122i | HPR152i | HPR153i HPR151i Configuration Transducer 15" subwoofer 15" cone transducer with 3" voice coil HPR181i 18" subwoofer 18" cone transducer with 4" voice coil HPR151i | HPR181i Frequency Response (-3 dB)1 Frequency Range (-10 dB)1 Nominal Coverage (-6 dB) Maximum SPL (1 meter) Amplifiers Power Output 51 Hz ­ 105 Hz 43 Hz ­ 145 Hz N/A 133 dB peak 700 W Class H 45 Hz ­ 95 Hz 39 Hz ­ 145 Hz N/A 134 dB peak 700 W Class H Input Impedance () Controls Indicators Cooling Amplifier Protection 22k balanced / 11k unbalanced Gain · Low-cut filter · Front LED On/Off · Power · Circuit breaker · Polarity Power · Signal · Limit Convection Thermal and Output Limiting · Output Short Circuit · Overtemperature Muting · Driver DC Protection 2.5 A Current consumption at 120 VAC 2.2 A (1/8 power EIA noise) Enclosure Finish Grille Suspension/ Attachment Points Connectors Dimensions (HWD) Weight (Net) Available Accessories See descriptions below Painted birch plywood Black textured paint Powder coated 16 gauge steel N/A N/A Balanced female XLR line level inputs x 2 (L+R) · Balanced male XLR full range line level through puts x 2 (L+R) · Male XLR low-cut line level outputs x 2 (L+R) 25.6" x 22" x 20.75" (651 mm x 559 mm x 525 mm) 98 lb / 44.5 kg HPR COVER 151 · HPR POLE 26 HPR POLE 31 28.6" x 23.5" x 22.9" (727 mm x 597 mm x 582 mm) 127 lb / 57.6 kg HPR COVER 181 · HPR POLE 26 HPR POLE 31 HPR M10 KIT ­ This kit features load-rated, forged shoulder, steel eyebolts (3) and is designed for vertical suspension of the HPR122i, HPR152i or HPR153i. HPR SUS KIT 122 ­ This kit features load-rated, forged shoulder, steel eyebolts (3) and a solid aluminum pullback bar. It is required for horizontal suspension of the HPR122i. HPR COVERS (for all models) ­ Soft cover made with weather resistant, heavy-duty Nylon /Cordura ® material. Oversize pocket to hold cables. Specifications subject to change without notice. HPR Series HPR152i Top 13.3" 337 mm Dimensions HPR153i Top 13.3" 337 mm 17.9" 455 mm 33.6" 853 mm 45.1" 1144 mm 17.9" 455 mm 19.1" 485 mm Side 19.1" 485 mm Side HPR122i Top 14.9" 379 mm Front 14.7" 373 mm Front HPR151i Top 26.9" 683 mm HPR181i Top Front 20.75" 525 mm Side 22.9" 582 mm 22" 559 mm 23.5" 597 mm 25.6" 651 mm 28.6" 727 mm Front Specifications subject to change without notice. Side Front Side QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. Cordura is a registered trademark for durable fabrics. All other trademarks are the property of their respective owners. Patents may apply or be pending. 1675 MacArthur Boulevard · Costa Mesa, CA 92626 · Ph: 800/854-4079 or 714/957-7100 · Fax: 714/754-6174 HPR Spec Sheet 06/19/08 qscaudio.com ...