User manual RAYMARINE ST6002 TILLER PILOT - REFERENCE GUIDE

To Automatically Steer to a Fixed Wind Angle Autotack To Adjust Autopilot Course-keeping Accuracy Autopilot response controls course keeping accuracy. Higher response settings keep a tighter course but increase the amount of drive activity and battery use. ® Set to a level appropriate for your needs SmartPilot® ST6002 Controller WIND MAG Wind Wind Use -1 or +1 to adjust response level. Press disp to return to previous mode. MAG Auto Tack PORT Auto Tack STARBOARD To Adjust Lighting Level 1 sec MAG Wind MAG TillerPilot D9419-1 86128-1 MAG N.B. Refer to section 1.5 of the ST6002 Operating Guide for full details Use disp to adjust lighting level. Wait 10 sec to return to previous mode. Quick Reference Guide Display Layout To activate the Autopilot To change the Autopilot Heading 55° To follow a Route set on a Chartplotter 85° MAG 2 MAG MAG standby Press for Manual Control auto Press to activate the Autopilot 1 Attach TillerPilot MAG For Manual Control course change keys Port 1° Port 10° Starboard 1° Starboard 10° 1 MAG x3 2 Remove TillerPilot MAG MAG OK? disp Press to display data pages Press for 1 second for lamp control Press for 3 seconds for power off track When the Autopilot is activated, press to follow a route from a connected navigation system. Press again to accept the new course MAG MAG MAG 3 D9420-1