User manual RCA 32V550T

Television User's Guide Retourner le cahier pour la version française TOCOM 1624467B Changing Entertainment. Again. Important Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates important instructions accompanying the product. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC Regulations state that unauthorized changes or modifications to this equipment may void the user's authority to operate it. Caution: Using video games or any external accessory with fixed images for extended periods of time can cause them to be permanently imprinted on the picture tube (or projection TV picture tubes). ALSO, some network/program logos, phone numbers, etc. may cause similar damage. This damage is not covered by your warranty. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Product Registration Please fill out the product registration card (packed separately) and return it immediately. For U.S. customers: Your RCA Consumer Electronics product may also be registered at www.rca.com/ productregistration. Registering this product allows us to contact you if needed. Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers. These numbers are located on the product. Model No. ____________________ Serial No. __________________ Purchase Date: ______________ Dealer/Address/Phone: _________________________________________________________________ Table of Contents Chapter 1: Connections & Setup Things to Consider Before You Connect ....................................................................... 3 Protect Against Power Surges .................................................................................................................... 3 Protect Components from Overheating .................................................................................................. 3 Position Cables Properly to Avoid Audio Interference ........................................................................ 3 Important Stand and Base Safety Information ..................................................................................... 3 Use Indirect Light .......................................................................................................................................... 3 Cables Needed to Connect Components to Your TV ............................................................................ 3 TV + DVD + VCR .............................................................................................................. Using the VPORT Jack ..................................................................................................... Explanation of Jacks ....................................................................................................... The Front of Your TV ...................................................................................................... 4 5 6 7 Front Input Jacks ........................................................................................................................................... 7 Front Panel Buttons ...................................................................................................................................... 7 Plug in the TV .................................................................................................................. Put batteries in the remote ........................................................................................... How to Use the Remote Control to Complete the Initial Setup ................................ Turn on the TV ................................................................................................................. Complete the Initial Setup ............................................................................................. 7 7 8 8 8 Complete Auto Channel Search ................................................................................................................. 8 Chapter 2: Using the Remote Control Button Descriptions for TV Mode .................................................................................. 9 Button Descriptions for DVD and VCR Modes.............................................................. 9 Using the INPUT Button ............................................................................................................................. 10 Programming the Remote to Operate Other Components........................................ 10 Find Out If You Need to Program the Remote .................................................................................... 10 Programming the Remote ......................................................................................................................... 10 How to Use the Remote After You've Programmed It ......................................................................12 Remote Control Codes .................................................................................................. 12 Chapter 3: Using the TV's Features Channel Banner ............................................................................................................. 14 Why You Should Use the Auto Tuning Feature ......................................................... 14 How to Set Up the Auto Tuning Feature ...............................................................................................14 Parental Controls and V-Chip ...................................................................................... 15 How V-Chip Works ......................................................................................................................................16 USA V-Chip Rating System .......................................................................................................................16 1 Table of Contents Canadian English V-Chip Rating System ..............................................................................................16 Canadian French V-Chip Rating System ...............................................................................................17 USA V-Chip TV Rating Limit .....................................................................................................................18 Blocking Specific Content Themes .........................................................................................................19 Viewing Specific Content Themes ...........................................................................................................19 Blocking Canadian V-Chip Ratings .........................................................................................................20 V-Chip Movie Rating Limit .......................................................................................................................20 V-Chip Exempt Program Block.................................................................................................................20 KidPass ............................................................................................................................................................ 21 V-Chip Active ................................................................................................................................................ 21 Front Panel Lock ........................................................................................................................................... 21 Change Password ......................................................................................................................................... 21 Chapter 4: Using the TV's Menu System Sound Menu................................................................................................................... 22 Picture Menu ................................................................................................................. 22 Setup Menu ................................................................................................................... 23 Parental Control Menu ................................................................................................. 24 Time Menu ..................................................................................................................... 24 Chapter 5: Other Information Troubleshooting ............................................................................................................. 25 Care and Cleaning ......................................................................................................... 27 Limited Warranty .......................................................................................................... 27 Accessory Information .................................................................................................. 29 2 Chapter 1: Connections & Setup Things to Consider Before You Connect Protect Against Power Surges · Connect all components before you plug any of their power cords into the wall outlet. · Turn off the TV and/or component before you connect or disconnect any cables. · Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions packed separately. Protect Components from Overheating · Don't block ventilation holes on any of the components. Arrange the components so that air can circulate freely. · Don't stack components. · If you place components in a stand, make sure you allow adequate ventilation. · If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won't flow around other components. Position Cables Properly to Avoid Audio Interference · Insert each cable firmly into the designated jack. · If you place components above the TV, route all cables down the side of the back of the TV instead of straight down the middle of the TV. · If your antenna uses 300-ohm twin lead cables, do not coil the cables. Also, keep the twin lead cables away from audio/video cables. Important Stand and Base Safety Information Choose the location for your TV carefully. Place the TV on a stand or base that is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage the TV. Refer to the Important Safety Instructions packed separately. Use Indirect Light Don't place the TV where sunlight or room lighting will be directed toward the screen. Use soft or indirect lighting. Cables Needed to Connect Components to Your TV The pictures below show the cables needed for the connections represented in this book. Coaxial cable S-Video cable Audio/Video cables Component Video (Y, Pb, Pr) cables Component video to VPORT cable Xbox to VPORT cable Chapter 1 Graphics contained within this publication are for representation only. 3 Connections & Setup VCR VIDEO OUT R IN R L L AUDIO TV (back panel) OUT TO TV R L V OUTPUT CH3 CH4 2 VPORT VIDEO 2 IN FROM ANT R AUDIO L/MONO VIDEO Pr Pb Y 3 From Cable or Antenna TV ANT R L/MONO VIDEO S-VIDEO IN AUDIO VIDEO 1 1D 1B DVD 1A 1C* OUT Pr Pb Y S-VIDEO R L VIDEO TV + DVD + VCR 1. Connect your DVD Player to your TV. * If you connect an S-Video cable, you must connect the audio cables to the VIDEO 1 AUDIO jacks on the back of the TV, not the VIDEO 2 AUDIO jacks. A. Connect the audio (white and red) cables to the VIDEO 2 R and L/MONO AUDIO jacks on the back of the TV and to the Audio Output jacks on the DVD player. B. If your DVD player has Component Output Jacks (Y, Pb, Pr), connect three video grade cables to the Y, Pb, Pr jacks on the DVD player and to the VIDEO 2 Y, Pb, Pr jacks on the back of the TV. If your DVD player doesn't have Y, Pb, Pr jacks, go to C. -ORC. If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on the DVD player and to the S-VIDEO IN jack on the back of the TV. If your DVD player doesn't have an S-Video jack, go to D. Note: If you connect an S-Video cable, you must connect the audio cables to the VIDEO 1 AUDIO jacks on the back of the TV, not the VIDEO 2 AUDIO jacks. -ORD. Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the VIDEO 2 VIDEO jack on the back of the TV. 2. Connect your TV to your VCR Connect a coaxial cable to the TV ANT jack on your TV and to the Output Jack on your VCR (sometimes labeled OUT TO TV). Note: If your VCR has A/V output jacks, you can connect your TV to your VCR using audio/video cables for better quality. 3. Make sure cable or antenna is connected to your VCR. Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR. Go to page 7 4 Graphics contained within this publication are for representation only. Chapter 1 Connections & Setup TV (back panel) Xbox R L V OUTPUT VIDEO 2 R AUDIO L/MONO VIDEO VPORT Pr Pb Y TV ANT VIDEO 1 DVD OUT L R R L/MONO VIDEO S-VIDEO IN AUDIO Y Pb Pr OR From Cable, Cable Box, or Antenna Using the VPORT Jack The VPORT jack lets you connect an XboxTM video game system to the TV using an Xbox to VPORT cable (not provided). Go to page 29 to purchase the Xbox to VPORT cable. You can also connect a component, such as a DVD player, that has component video jacks (Y, Pb, Pr) using a Component video to VPORT cable (not provided). When using the Component video to VPORT cable, make sure to connect the left and right audio cables to the component in order for the TV to receive sound. Note: The VPORT jack cannot be used for game consoles other than the Xbox video game system. 1. Connect your TV to a DVD player Use a Component video to VPORT cable (not provided) to connect your TV to another component, such as a DVD player, that has Y, Pb, Pr jacks. Component video to VPORT cable (not supplied) Connect the Component video to VPORT cable to the VPORT jack on the back of the TV. Connect the other ends of the Component video to VPORT cable to the Y, Pb, Pr and the Audio Output Jacks on the back of the DVD. -OR2. Connect your TV to an Xbox video game system Connect the end of an Xbox to VPORT cable (not provided) labeled TV to the VPORT jack on the back of the TV and the other end to the corresponding jack on the back of the Xbox video game system. Xbox to VPORT cable (not supplied) Note: If you have an audio receiver, you might be able to connect a digital audio cable to the digital audio jack that's on the VPORT cable. Go to page 7 "Xbox is a trademark of Microsoft Corporation in the United States and/or other countries." Chapter 1 Graphics contained within this publication are for representation only. 5 Connections & Setup Explanation of Jacks This section describes the jacks you can use to make connections. There are several ways to connect components to your TV. VPORT Go to the previous page for VPORT explanation. TV ANT Lets you connect a coaxial cable to receive the signal from the antenna, cable, cable box, or if using the example on page 4, a VCR. VIDEO 1 VIDEO, AUDIO R and L/MONO Lets you connect a component such as a VCR, DVD player, or laserdisc player. · · · · R (RIGHT) AUDIO Provides right audio connection. The right audio connector is usually red. L/MONO AUDIO Provides left audio connection. The left audio connector is usually white. VIDEO Provides composite video connection. The video connector is usually yellow. S-VIDEO IN Provides better picture quality than the video jacks because the color part of the signal is separated from the black and white part of the picture. When using S-VIDEO IN, make sure to connect left and right audio cables to the L/MONO and R AUDIO Input jacks. VIDEO 1 R L/MONO VIDEO S-VIDEO IN AUDIO R AUDIO L/MONO VIDEO VIDEO 2 VIDEO, AUDIO R and L/MONO and Y, Pb, Pr Lets you connect a component video source, such as a DVD player. · Y, Pb, Pr Provides optimum picture quality because the video is separated into three signals. Use three videograde cables for the connection. When using VIDEO 2 Y, Pb, Pr, make sure to connect left and right audio cables to the VIDEO 2 AUDIO Input jacks. R (RIGHT) AUDIO, L/MONO and VIDEO description is the same as VIDEO 1. Their VIDEO 2 Pr Pb Y · R L V AUDIO/VIDEO OUTPUTS Lets you connect an amplifier or audio receiver for improved sound quality or an external video monitor. OUTPUT 6 Graphics contained within this publication are for representation only. Chapter 1 Connections & Setup The Front of Your TV Front Input Jacks The TV has front input jacks for your convenience: one set of audio/video inputs and a headphone jack. These jacks are towards the front of the TV on the side. To access the component you connected to the front of the TV, press the INPUT button on your remote until FRNT appears on the screen. The jacks are ideal for connecting a video game console or a camcorder. Note: When connecting a component that has only one audio jack, such as some camcorders, use the TV's AUDIO L /MONO jack to hear the audio. MENU/OK CH CH VOL VOL POWER AUDIO VIDEO L/MONO RIGHT VIDEO Receives video from another component such as a VCR, camcorder, or video game console. L/MONO and RIGHT AUDIO Receives audio from another component such as a VCR, camcorder, or video game console. Front Panel Buttons If you cannot locate your remote, you can use the front panel buttons on the top of your TV to operate many of the TV's features. MENU Brings up the Main menu. CH v Scans down through the current channel list. In the menu system, acts like the down arrow button on the remote control and adjusts menu controls. CH Scans up through the channel list. In the menu system, acts like the up arrow button on the remote control and adjusts menu controls. VOL < Decreases the volume. In the menu system, acts like the left arrow button on the remote control and adjusts menu controls. VOL > Increases the volume. In the menu system, acts like the right arrow button on the remote control and adjusts menu controls. POWER Turns the TV on and off. Plug in the TV Plug the end of the power cord into a grounded wall outlet. Insert the plug completely into the outlet. Put batteries in the remote · Remove the battery compartment cover from the back of the remote by pushing down on and sliding off the cover. · Insert 2 fresh "AAA" batteries. Make sure the polarities (+ and -) are aligned correctly. · Replace the cover. Chapter 1 v Graphics contained within this publication are for representation only. 7 Connections & Setup How to Use the Remote Control to Complete the Initial Setup The technical term is "Navigation"­ how you move through the on-screen menus. The method is the same throughout the menu screens: highlight your choice and select it. CH MUTE GO BACK DVD ON OFF VCR TV VOL Arrows CLEAR MENU To highlight a menu item, press the arrow buttons on the remote to highlight one of the items listed on the screen. Use the up or down arrow button to move up or down. Use the right or left arrow button to move right or left. To select the item that you've highlighted, press OK. Note: Highlighted means that the menu item stands out from other menu items on the list (appears darker, brighter, or a different color). OK PRESETS SKIP OK button Turn on the TV Press TV on the remote, or press POWER on the TV's front panel. Note: Pressing the TV button not only turns on the TV, but puts the remote into TV mode. "TV mode" means that the buttons on the remote control operate the TV's functions. SETUP Go Back Auto Ch. Search Closed Caption Auto Tuning Language ... ... ... English . . . Complete the Initial Setup The menu system in your TV allows the TV's features to work properly. The first time you turn on your TV, the SETUP screen appears with Language highlighted. The default language is English. To choose another language, press the right arrow button on the remote. AUTO CHANNEL SEARCH Go Back Signal Type Start Channel Cable. . . Complete Auto Channel Search This part of the setup allows the TV to search for all channels viewable through your antenna or cable TV system. This is sometimes called auto programming. 1. Highlight Auto Ch. Search and press OK. 2. The Signal Type option is set to Cable. To change the option to Antenna, press the right arrow button and then press OK. 3. Press the down arrow button to highlight Start. Press OK to begin the auto channel search. Once the search is complete, you can begin watching TV. For information on customizing your channels or menu options, go to Chapter 4. 8 Graphics contained within this publication are for representation only. Chapter 1 Chapter 2: Using the Remote Control Indicator DVD ON OFF Button Descriptions for TV Mode Arrows Used to highlight different items in the TV menu and to adjust the menu controls. CH VCR TV VOL MUTE GO BACK Indicator Indicates the programming mode when programming the remote to control components. Lights when you press a valid button on the remote. Flickers when a button is pressed and the batteries are low. (0-9) Number Buttons Enter channel numbers and time settings directly through the remote control. To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press the two digits and expect a few seconds delay. This is if you want to enter a third digit. CH + or CH - Scans up or down through the current channel list. Press once to change the channel up or down; press and hold to continue changing channels. CLEAR Removes any menu or display from the screen and returns you to normal viewing. GO BACK Returns you to the previous channel. INFO Brings up the channel banner. INPUT Toggles through the available input sources (VID1/SVID1, VID2/CVID2, FRNT, VPORT and current channel). MENU Brings up the Main menu. MUTE Reduces the TV's volume to its minimum level. Press again to restore the volume. OK When in the menu system, selects highlighted items. ON·OFF When in TV mode, turns the TV on and off. If in another mode (VCR, DVD, etc.) and programmed, will turn the component on and off. PRESETS Picture options are reset to original factory settings. SKIP Press once before changing channels and the TV will wait 30 seconds before returning to the original channel. Press repeatedly to add more time. TV Turns on the TV and puts the remote in TV mode. Also displays current status. VOL ­ or VOL + Decreases or increases the TV's volume. VPORT Tunes the TV to the VPORT input channel. You can program this button to control a VCR or DVD player. When programmed, changes the mode of the remote when the button is pressed. To restore the VPORT button to factory default mode (unprogrammed), press and hold VPORT, then press 1, 0, 0, and 0. CLEAR MENU OK PRESETS VPORT GUIDE INFO SKIP 1 4 7 INPUT 2 5 8 0 3 6 9 ANTENNA REVERSE PLAY FORWARD RECORD STOP PAUSE AGAIN SPEED ZOOM SEARCH OPEN CLOSE Button Descriptions for DVD and VCR Modes AGAIN In DVD mode, replays the last several seconds of the title you're playing. ANTENNA In VCR mode, functions as a TV/VCR button. DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on the TV and tune to the correct video input channel. GUIDE If you're operating another component that has a guide, this button accesses the on-screen Guide. Chapter 2 Graphics contained within this publication are for representation only. 9 Using the Remote Control OPEN·CLOSE In DVD mode, opens or closes the DVD disc tray. REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport control for some remote-controllable VCRs or DVD players. SEARCH SPEED In VCR mode, accesses Index Search feature. In VCR mode, selects a recording speed. VCR Puts the remote in VCR mode and, if auto tuning is enabled, will turn on the TV and tune to the correct video input channel. ZOOM In DVD mode, zooms in on the picture. Using the INPUT Button Use the INPUT button to scroll through the available video input channels and view components you have connected to the TV. 1. Make sure the component you want to view is turned ON. 2. Press INPUT to tune to an available video input source and view the component. 3. To return to the previous channel, continue pressing INPUT. DVD ON OFF VCR TV DVD and VCR buttons ON·OFF button CH Programming the Remote to Operate Other Components The universal remote can be programmed to operate most brands of remote controllable components. The remote is already programmed to operate most RCA, GE, and Proscan components. Notes: The TV button can't be programmed on this remote. The remote may not be compatible with all brands and models of components. It also may not operate all functions of the remote that came with your component. VOL MUTE GO BACK CLEAR MENU OK PRESETS VPORT GUIDE INFO SKIP 1 2 5 8 0 3 6 9 ANTENNA Find Out If You Need to Program the Remote To determine whether the universal remote needs to be programmed for your component, turn the component ON. For example, to program the remote for a VCR, turn on the VCR. Point the remote at the VCR, and press the VCR button. Then press ON·OFF or CH + (channel up) or CH ­ (channel down) to see if the VCR responds to the remote commands. If the component does not respond, the remote needs to be programmed. VPORT button INPUT 4 7 REVERSE PLAY FORWARD RECORD STOP PAUSE REVERSE and PLAY buttons AGAIN SPEED ZOOM SEARCH OPEN CLOSE STOP button Programming the Remote You'll use these buttons when programming the remote. There are two ways to program the remote control: · · automatic code search direct entry 10 Graphics contained within this publication are for representation only. Chapter 2 Using the Remote Control Using Automatic Code Search The following instructions can be used to program the remote to operate your components. If you want to stop the automatic code search without programming any of your components, press CLEAR until the indicator on the remote turns off. 1. Turn on the component you want to operate (VCR or DVD player) 2. Press and hold the component button you want to program (VCR, DVD, or VPORT). While holding the component button, press and hold ON·OFF until the indicator on the remote turns on, then release both buttons. 3. Point the remote at the component. Press and release PLAY (the indicator light on the remote flashes). The remote is searching for the correct code to program. When the indicator stops flashing (after about 5 seconds), press PLAY again to tell the remote to search the next set of codes. Continue pressing PLAY until the component turns off or the indicator light on the remote turns off. If the indicator light turns off, then all the codes for that particular component have been tested once. If the component does not turn off, then the remote can't be programmed to operate that component. Note: Each time you press PLAY, the remote sends about 10 sets of codes. Therefore, you might have to press the PLAY button up to 20 times. If the component you want to control does turn off: 1. Press and release REVERSE, then wait 2 seconds. Repeat this step until the component turns back ON. 2. To finish, press and hold STOP until the indicator on the remote turns off. Using Direct Entry 1. Turn on the component to be programmed. 2. Look up the brand and code number(s) for the component on the code list in this section. 3. Press and hold the component button you want to program on the remote. 4. Enter the code from the remote control code list on the following pages. If the indicator flashes, you have either entered an invalid code or the button isn't programmable. 5. Release the component button. 6. Point the remote at the component. Press ON·OFF to see if the component responds to the command. If it doesn't, try pressing the component button and then ON·OFF again. · If you get no response, repeat these steps using the next code listed for your brand, until the component responds to the remote commands. · If you try all the codes for your component brand and none work, try the automatic code search method. If automatic code search doesn't find the code, the remote is not compatible with your component. Chapter 2 Graphics contained within this publication are for representation only. 11 Using the Remote Control How to Use the Remote After You've Programmed It Because this universal remote can operate several different components it uses operational modes triggered by the component buttons. For example, if you want the remote to operate the TV, you would press the TV button to put the remote into TV mode before you could operate the TV. 1. Press the appropriate component button (DVD, VCR, VPORT) to set the remote to operate the component. 2. Press ON·OFF to turn the component ON or OFF. 3. Use the remote buttons that apply to that component. Note: If you keep pressing buttons and nothing happens, the remote is probably in the wrong mode. You must press the component button that matches the component you want to operate (i.e., if you want to operate the VCR, press VCR on the remote control to put the remote in VCR mode.) Remote Control Codes VCR Codes Programmable for VCR and VPORT buttons. Admiral .................................................................................... 2132 Adventura ................................................................................ 2026 Aiko .......................................................................................... 2027 Aiwa ......................................................................................... 2026 Akai ................. 2003, 2004, 2005, 2007, 2008, 2111, 2112, 2113 American High ........................................................................ 2021 Asha ......................................................................................... 2013 Audio Dynamics ........................................................... 2009, 2010 Audiovox ................................................................................. 2014 Bell & Howell ........................................................................... 2011 Beaumark ................................................................................. 2013 Broksonic ...................................................................... 2012, 2025 Calix ......................................................................................... 2014 Candle ..................................................... 2013, 2014, 2015, 2016, ............................................................................. 2017, 2018, 2019 Canon .................................................................. 2021, 2022, 2114 Capehart ......................................................................... 2020, 2110 Carver ....................................................................................... 2062 CCE ................................................................................ 2027, 2061 Citizen ........................................................................... 2013, 2014, ............................................. 2015, 2016, 2017, 2018, 2019, 2027 Colortyme ................................................................................ 2009 Colt ........................................................................................... 2061 Craig ......................................................... 2013, 2014, 2023, 2061 Curtis-Mathes .................................................... 2000, 2009, 2013, ................................... 2016, 2018, 2021, 2022, 2024, 2115, 2131 Cybernex ................................................................................. 2013 Daewoo .......... 2015, 2017, 2019, 2025, 2026, 2027, 2028, 2110 Daytron ..................................................................................... 2110 DBX ................................................................................ 2009, 2010 Dimensia ........................................................................ 2000, 2131 Dynatech .................................................................................. 2026 Electrohome ................................................................. 2014, 2029 Electrophonic .......................................................................... 2014 Emerson ............................. 2012, 2014, 2015, 2021, 2024, 2025, ..........2026, 2029, 2030, 2031, 2032, 2033, 2034,2035, 2036, ..........2037, 2038, 2039, 2040, 2041, 2042,2044, 2045, 2046, ............................................2047, 2065, 2113, 2116, 2117, 2130 Fisher ............. 2011, 2023, 2048, 2049, 2050, 2051, 2052, 2118 Fuji ................................................................................. 2021, 2119 Funai ........................................................................................ 2026 Garrard ..................................................................................... 2026 GE ....................................................................... 2000, 2001, 2013, ............................................. 2021, 2022, 2053, 2115, 2120, 2131 Goldstar ................................................... 2009, 2014, 2018, 2054 Gradiente ................................................................................. 2026 Harley Davidson ..................................................................... 2026 Harman Kardon ...................................................................... 2009 Harwood .................................................................................. 2061 Headquarter .............................................................................. 2011 Hitachi ......................................................................... 2055, 2056, ......................................................... 2057, 2107, 2111, 2120, 2122 Hi-Q .......................................................................................... 2023 Instant Replay ......................................................................... 2021 JCL ............................................................................................ 2021 JC Penney ................................................ 2009, 2010, 2011, 2013, ...................................................... 2014, 2021, 2022, 2055, 2056, ........................................................ 2058, 2059, 2060, 2107, 2118 Jensen ................................................................. 2055, 2056, 2111 JVC ....................................... 2009, 2010, 2011, 2018, 2111, 2123 Kenwood .................... 2009, 2010, 2011, 2016, 2018, 2111, 2123 KLH ........................................................................................... 2061 Kodak ............................................................................ 2014, 2021 Lloyd ........................................................................................ 2026 Logik ........................................................................................ 2061 LXI ............................................................................................ 2014 Magnavox ........................................................ 2021, 2022, 2062, ........................................................ 2063, 2104, 2105, 2108, 2124 Magnin ..................................................................................... 2013 Marantz .......... 2009, 2010, 2011, 2016, 2018, 2021, 2062, 2064 Marta ........................................................................................ 2014 Masushita ................................................................................ 2021 Mei ........................................................................................... 2021 Memorex ........ 2011, 2013, 2014, 2021, 2023, 2026, 2104, 2132 MGA .................................................................... 2029, 2065, 2113 MGN Technology .................................................................... 2013 Midland .................................................................................... 2053 Minolta ............................................................... 2055, 2056, 2107 Mitsubishi .............. 2029, 2055, 2056, 2065, 2066, 2067, 2068, ............. 2069, 2070, 2071, 2072, 2073, 2074, 2106, 2113, 2123 12 Graphics contained within this publication are for representation only. Chapter 2 Using the Remote Control VCR Codes continued Montgomery Ward .................................................... 2075, 2132 Motorola ..................................................................... 2021, 2132 MTC ............................................................................. 2013, 2126 Multitech .................................... 2013, 2016, 2026, 2053, 2061 NEC ............................................... 2009, 2010, 2011,2016, 2018, ............................................ 2064, 2076, 2078, 2079, 2111, 2123 Nikko ...................................................................................... 2014 Noblex .................................................................................... 2013 Olympus ................................................................................. 2021 Optimus ....................................................................... 2014, 2132 Optonica ................................................................................ 2096 Panasonic ......................... 2021, 2022, 2109, 2125, 2126, 2127 Pentax .......................................... 2016, 2055, 2056, 2107, 2120 Pentex Research .................................................................... 2018 Philco ..................................................... 2021, 2022, 2062, 2063 Philips .................................................... 2021, 2062, 2096, 2124 Pilot ........................................................................................ 2014 Pioneer ........................................ 2010, 2055, 2080, 2081, 2123 Portland .................................................. 2016, 2017, 2019, 2110 Proscan ............................................................. 2000, 2001, 2131 Protec ..................................................................................... 2061 Pulsar ..................................................................................... 2104 Quarter .................................................................................... 2011 Quartz ..................................................................................... 2011 Quasar ............................................................... 2021, 2022, 2125 RCA ...................... 2000, 2001, 2003, 2013, 2021, 2055, 2056, .................. 2082, 2083, 2084, 2085, 2086, 2087, 2088, 2089, ....................... 2090, 2091, 2107, 2115, 2120, 2125, 2131, 2133 Radioshack/Realistic ............................ 2011, 2013, 2014, 2021, .................... 2022, 2023, 2026, 2029, 2049, 2050, 2096, 2132 Radix ...................................................................................... 2014 Randex ................................................................................... 2014 Ricoh ...................................................................................... 2128 Runco ..................................................................................... 2104 Samsung ........................... 2005, 2013, 2015, 2033, 2053, 2112 Sanky ........................................................................... 2104, 2132 Sansui ..................................................... 2010, 2092, 2111, 2123 Sanyo ................................................................ 2011, 2013, 2023 Scott ............ 2012, 2015, 2025, 2032, 2038, 2065, 2093, 2116 Sears ............................................ 2011, 2014, 2021, 2023, 2048, ............................... 2049, 2050, 2051, 2055, 2056, 2107, 2118 Sharp ..................... 2017, 2029, 2094, 2095, 2096, 2097, 2132 Shintom ................................................. 2004, 2056, 2061, 2098 Shogun ................................................................................... 2013 Signature ............................................................................... 2132 Singer ................................................................ 2021, 2061, 2128 Sony ....................................................... 2004, 2098, 2099, 2119 STS ............................................................................... 2021, 2107 Sylvania ................ 2021, 2022, 2026, 2062, 2063, 2065, 2124 Symphonic ............................................................................ 2026 Tandy ...................................................................................... 2011 Tashiko ................................................................................... 2014 Tatung ..................................................................................... 2111 TEAC ................................................................. 2026, 2085, 2111 Technics ....................................................................... 2021, 2109 Teknika ........................................ 2014, 2021, 2026, 2100, 2129 TMK .................................................................. 2013, 2024, 2047 Toshiba ................... 2015, 2049, 2051, 2055, 2065, 2093, 2116 Totevsion .................................................................... 2013, 2014 Unitech ................................................................................... 2013 Vector Research .................................... 2009, 2010, 2015, 2016 Victor ..................................................................................... 2010 Video Concepts ........................... 2009, 2010, 2015, 2016, 2113 Videosonic ............................................................................. 2013 Wards ........................................................ 2013, 2014, 2015, 2021, ........................................... 2023, 2026, 2029, 2055, 2056, 2061, .................................... 2096, 2101, 2102, 2103, 2107, 2116, 2132 XR-1000 .............................................................. 2021, 2026, 2061 Yamaha ............................................. 2009, 2010, 2011, 2018, 2111 Zenith ............................................... 2004, 2098, 2104, 2119, 2128 DVD codes Programmable for DVD and VPORT buttons. Aiwa ........................................................................................... 3009 Apex ................................................................................ 3023, 3024 GE ............................................................................................... 3000 Hitachi ....................................................................................... 3008 JVC .................................................................................. 3002, 3010 Konka ............................................................................... 3011, 3012 Magnavox ................................................................................. 3003 Mitsubishi .................................................................................. 3004 Panasonic .................................................................................. 3013 Philips ....................................................... 3003, 3019, 3021, 3022 Pioneer ....................................................................................... 3005 Proscan ...................................................................................... 3000 RCA ................................................................................. 3000, 3001 Samsung .................................................................................... 3025 Sanyo ......................................................................................... 3014 Sony ..................................................................... 3006, 3015, 3016 Toshiba ................................................................. 3007, 3017, 3020 Zenith ......................................................................................... 3018 Chapter 2 Graphics contained within this publication are for representation only. 13 Chapter 3: Using the TV's Features Channel Banner There are several items that might appear on-screen when you press the TV or INFO button on the remote. This display is called the Channel Banner. The following list describes the items on the Channel Banner screen (left to right and top to bottom). SAP Stereo 06 ABCDEF KidPass: 2:24 Skip: 0:30 CC 07:18am X SAP Displayed when the current channel is broadcasting SAP (Second Audio Program) information. Displayed when V-Chip has been activated. KidPass: 2:24 CC Stereo or Mono Displayed when KidPass is set and the length of time remaining. Displayed when Closed Captioning is available on the current channel. Stereo displayed when the current channel is broadcasting in stereo. Mono displayed when the current channel is broadcasting in mono. Skip: 0:30 Corresponds to the SKIP button. Shows the amount of time left before the TV switches back to the previous channel. Displays the current time. Displays the current channel and label assigned to the channel. Displayed when you mute the sound. 07:18 am 06 ABCDEF X Why You Should Use the Auto Tuning Feature The auto tuning feature tunes the TV to the correct channel for different components you have connected to your TV (like a VCR, DVD player, etc.). When you set up auto tuning in the menu system you don't have to remember to change your TV to channel 3, for example, when you want to watch the tape in your VCR. How to Set Up the Auto Tuning Feature The way you set up the auto tuning feature in the TV's menu corresponds to the component buttons on the remote and the way you have each component connected to your TV. When you set up auto tuning, you're telling the TV what channel to tune to when you press the VCR or DVD button on the remote control. 1. Press MENU (the MAIN MENU appears). 2. Highlight Setup and press OK on your remote control. 3. Highlight Auto Tuning and press OK. 14 Graphics contained within this publication are for representation only. Chapter 3 Using the TV's Features 4. Choose which channel you want to set: Set VCR1 Lets you set up the channel the TV tunes to when you press the VCR button. Set VCR2 Not available with your remote control. Set SAT/CABLE Not available with your remote control. Set DVD Lets you set up the channel the TV tunes to when you press the DVD button. 5. Press the right arrow button to select the choice that matches the way you have the component connected to this TV. The choices and a brief explanation follow: AUTO TUNING Go Back Set VCR1 Set VCR2 Set SAT/CABLE Set DVD VID1 . . . VID1 . . . CH02 . . . CH03 . . . N/A Choose this if you don't have this particular component connected to the TV, or if you don't want the TV to automatically tune to the correct channel when you're using this component. CH02 (SAT/CABLE only- Not available with your remote control). CH03 or 04 Component is connected to the TV ANT jack on the back of the TV, and you want the TV to tune to channel 3 or 4 when you press the corresponding button on the remote. Reminder: make sure the component's Channel 3/4 switch is set to the appropriate channel. VID1 Component is connected to the VIDEO 1 VIDEO or S-VIDEO IN jack on the back of the TV and you want the TV to tune to a video input channel when you press the corresponding button. VID2 Component is connected to the VIDEO 2 VIDEO or Y, Pb, Pr jacks on the back of the TV and you want the TV to tune to a video or component video input channel when you press the corresponding button. FRNT (Front Video Input) Component is connected to the VIDEO jack on the front of the TV and you want the TV to tune to the front video input channel when you press the corresponding button. Parental Controls and V-Chip The choices in the USA V-CHIP menu involve software inside your TV (referred to as V-Chip) which allows you to block TV programs and movies based on violence, sex, or other content you may believe children should not view. Once you block programs, you can unblock programs by entering a password. By default, the software inside your TV is turned "off." For instructions to turn on V-Chip, go to page 21. Chapter 3 Graphics contained within this publication are for representation only. 15 Using the TV's Features How V-Chip Works V-Chip reads the program's age-based rating (TV-MA, TV-14, etc.) and content themes [(Violence (V), Adult Language (L), etc.)]. If you have blocked the rating and/or content themes that the program contains, you will receive the message This channel has not been approved for viewing. Change channel or press OK to enter password and temporarily deactivate the Parental Control. Broadcasters are not required to provide content themes, so programs received with no content themes will only be blocked if you block their age-based rating. You can also block out programs that have been given a rating of Not Rated, and programs that are considered unrated. The TV age-based ratings and content themes you can block follow: USA V-Chip Rating System TV-MA (Mature Audience Only) Specifically designed to be viewed by adults and may be unsuitable for children under 17. It contains one or more of the following content themes: crude indecent language (L), explicit sexual activity (S), or graphic violence (V). TV-14 (Parents Strongly Cautioned) Contains some material that many parents would find unsuitable for children under 14. Parents are strongly urged to exercise greater care in monitoring this program and are cautioned against letting children under the age of 14 watch unattended. This program contains one or more of the following content themes: intensely suggestive dialogue (D), strong coarse language (L), intense sexual situations (S), or intense violence (V). TV-PG (Parental Guidance Suggested) Contains material that parents may find unsuitable for younger children. Many parents may want to watch it with their younger children. The program contains one or more of the following content themes: some suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S), or moderate violence (V). TV-G (General Audience) Most parents would find this program suitable for all ages. It contains little or no sexual dialogue (D) or situations (S), no strong language (L), and little or no violence (V). TV-Y7 (Directed to Children 7 years and older) Designed for children ages 7 and above. It may be more appropriate for children who have acquired the developmental skills needed to distinguish between make-believe and reality. Themes and elements in this program may include mild fantasy violence (FV) or comedic violence, or may frighten children under the age of 7. TV-Y (All Children) Themes and elements in this program are designed for a young audience, including children from ages 2-6. It is not expected to frighten younger children. Canadian English V-Chip Rating System 18+ (Adults) Programming intended for adults 18 and older. It may contain elements of violence, language, and sexual content which could make it unsuitable for viewers under 18. Violence Guidelines: May contain violence integral to the development of the plot, character or theme, intended for adult audiences. Other Content Guidelines: May contain graphic language and explicit portrayals of nudity and/or sex. 16 Graphics contained within this publication are for representation only. Chapter 3 Using the TV's Features 14+ (Viewers 14 and over) Programming contains themes or content which may not be suitable for viewers under the age of 14. Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens. Violence Guidelines: May contain intense scenes of violence. Could deal with mature themes and societal issues in a realistic fashion. Other Content Guidelines: May contain scenes of nudity and/or sexual activity. There could be frequent use of profanity. PG (Parental Guidance) Programming intended for a general audience but which may not be suitable for younger children (under the age of 8). Parents may consider some content inappropriate for unsupervised viewing by children aged 8-13. Violence Guidelines: Depictions of conflict and/or aggression will be limited and moderate; may include physical, fantasy, or supernatural violence. Other Content Guidelines: May contain infrequent mild profanity, or mildly suggestive language. Could also contain brief scenes of nudity. G (General Audience) Programming considered acceptable for all ages groups. While not designed specifically for children, it is understood younger viewers may be part of the audience. Violence Guidelines: Will contain very little violence, either physical or verbal or emotional. Will be sensitive to themes which could frighten a younger child, will not depict realistic scenes of violence which minimize or gloss over the effects of violent acts. Other Content Guidelines: There may be some inoffensive slang, no profanity and no nudity. C8+ (Children 8 and Older) Programming generally considered acceptable for children 8 years and over to watch on their own. Violence Guidelines: Violence will not be portrayed as the preferred, acceptable, or only way to resolve conflict or encourage children to imitate dangerous acts which they may see on television. Any realistic depictions of violence will be infrequent, discreet, of low intensity and will show the consequences of the acts. Other Content Guidelines: There will be no profanity, nudity or sexual content. C (Children) Programming intended for children under age 8. Violence Guidelines: Careful attention is paid to themes which could threaten children's sense of security and well being. There will be no realistic scenes of violence. Depictions of aggressive behaviour will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature. Other Content Guidelines: There will be no offensive language, nudity or sexual content. Canadian French V-Chip Rating System 18+ (Adults) Programming is for adults only. This program contains sustained violence or extremely violent scenes. 16+ (Viewers 16 and over) Programming is not suitable for those under age 16. This program contains frequent scenes of violence or intensely violent scenes. 13+ (Viewers 13 and over) Programming may not be suitable for children under the age of 13. This program either contains several violent scenes or one or more scenes that are violent enough to affect them. Viewing in the company of an adult is therefore strongly recommended for children under the age of 13. 8+ (Viewers 8 and over) Not recommended for young children. This program is suitable for most audiences, but it contains mild or occasional violence that could upset young children. Viewing in the company of an adult is therefore recommended for young children (under the age of 8) who do not distinguish between reality and imagination. G (General Audience) This program is suitable for audiences of all ages. It contains no violence, or any violence that it does contain is either minimal or is presented in a humorous manner, as a caricature, or in an unrealistic way. Chapter 3 Graphics contained within this publication are for representation only. 17 Using the TV's Features PARENTAL CONTROL Go Back V-Chip active USA V-Chip Canada V-Chip USA V-CHIP Exempt Prgms. KidPass Active Go Back KidPass Movie Ratings Lock Fr. Panel TV Ratings Change Passwd. ... ... USA V-Chip TV Rating Limit The V-Chip TV Rating Limit let you decide which TV programs can and cannot be viewed. To set TV programming limits: 1. Choose Parental Control from the MAIN MENU (the PASSWORD screen appears the first time you enter the Parental Control menu). Create your password using the number buttons on the remote. 2. Highlight and select USA V-Chip. Then select TV Ratings. V FV V V V V ... ... ... ­­­­ TV RATING LIMIT Go Back Status TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y View View View View View View B B D L V V V S V V V 3. Once you get to the TV RATING LIMIT screen, use the arrow buttons and OK on your remote to change the status of a TV program rating or content theme from View to Block. 4. For TV rating limits to take effect, turn on V-Chip active in the PARENTAL CONTROL menu (box has check mark). The following sections give you more details about how to change the status of TV program limits. Note: If you forget your password you can reset it. Make sure the TV is off. Simultaneously press and hold VOL< on the TV's front panel and CLEAR on the remote for approximately 5 seconds. Enter a new password next time you access the PARENTAL CONTROL menu. Press OK to view/block prog. with this rating. The V-Chip Rating Screen The following is an example of where items are located within the TV RATING LIMIT screen. Rating Status Field Lets you select whether the status of the age-based rating limit to the left is View or Block. Content Themes TV RATING LIMIT Go Back Lists the content themes you can block or view. D B B L V V V S V V V V FV V V V V Rating Field Status TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y View View View View View View Lets you select from a list of age-based ratings you can block or view. Content Status Fields Press OK to view/block prog. with this rating. Lets you select which content themes to view for the selected rating, and whether the status of the content theme is currently View (V) or Block (B). Rating Settings Area Lets you see the current block/view state of agebased ratings and associated content. 18 Graphics contained within this publication are for representation only. Chapter 3 Using the TV's Features Blocking Age-Based Ratings Hierarchy of Age-Based Ratings TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y Mature Audience Only Parents Strongly Cautioned Parental Guidance Suggested General Audience Directed to Children 7 years and older All Children You can automatically block all program ratings above a specified age-based rating level. To block programs with higher ratings: 1. Press the up or down arrow button to scroll to the rating corresponding with the lowest rating you do not want the child to watch. 2. Press the OK button to toggle between View and Block. The status for the rating listed to the left and all higher ratings automatically changes to Block. 3. Press the up or down arrow button to highlight Go back and press OK. 4. Turn on V-Chip active in the PARENTAL CONTROL menu (box has check mark) for rating limits to take effect. Viewing Age-Based Ratings After you block age-based ratings, you can change some of the ratings back to View. 1. Press the up or down arrow button to select the rating with a status of Block. 2. Press OK to select View. Content Themes D L S V FV Sexually explicit dialogue Adult language Sexual situations Violence Fantasy Violence Blocking Specific Content Themes You can block programs based on their content. (Content is represented by the D, L, S, V and FV on your screen.) When you block a content theme for a particular rating, you automatically block that content theme for higher rated programs as well. To block program content: 1. Determine the content themes you want to block. 2. Press the down arrow button to scroll to the rating whose content theme you want to change. 3. Press the right arrow button to move the highlight to a particular content theme status. 4. Press the OK button to change its status to B. (In the example to the left, you block the language (L) corresponding with TV-14. The language for TV-MA is blocked as well). Notes: Broadcasters are not required to provide content themes or age-based ratings. You must remember to activate Parental Controls for rating limits to take effect. TV RATING LIMIT Go Back Status TV-MA TV-14 TV-PG TV-G TV-Y7 TV-Y View View View View View View V V V D L B B V S V V V V FV V V V Press OK to view/block prog. containing adult language. Viewing Specific Content Themes If you block specific content themes, you have the option of going back and changing some of the content themes back to (V) View: Chapter 3 Graphics contained within this publication are for representation only. 19 Using the TV's Features 1. Determine the content themes you want to change to (V) View. 2. Press the down arrow button to scroll to the rating whose content theme you want to change, such as B under language (L) corresponding with TV-14. 3. Press the right arrow button to move the highlight to a particular content theme status. 4. Press the OK button to change the status back to V. Your child would then be able to watch programs with the TV-14 adult language content, but not programs with TV-MA language content. Note: Only the content theme status corresponding to TV-14 (L) language changes to (V) View. Higher rated content themes, such as that for TV-MA language, do not change. ENGLISH RATINGS Go Back 18+ 14+ PG G C8+ C Press OK to view/block prog. intended for children over the age of 8. Blocking Canadian V-Chip Ratings If you receive Canadian programs you can block Canadian English and French V-Chip by ratings only. When you block a particular rating, you automatically block the higher rated programs as well. To block Canadian English and French program ratings: 1. Select Canada V-Chip from the PARENTAL CONTROL menu. 2. Highlight English Ratings or French Ratings and press OK. 3. Determine the rating you want to block. 4. Press the down arrow button to scroll to the rating you want to change. 5. Press the OK button to change its status to block (the lock icon appears and all ratings above the one you selected change to lock). FRENCH RATINGS Go Back 18+ 16+ 13+ 8+ G Press OK to view/block prog. intended for children over the age of 8. V-Chip Movie Rating Limit Set movie rating limits by blocking movies rated above a specified level. To access the Movie Rating Limit menu: 1. Press MENU on the remote control (the MAIN MENU appears). 2. Select Parental Control. 3. Select USA V-Chip. 4. Select Movie Ratings. Blocking Movie Ratings Once you are in the Movie Rating Limit menu, follow the same steps described for blocking Canadian V-Chip Ratings. V-Chip Exempt Program Block The Exempt Prgms. option lets you decide if programs that the V-Chip recognizes as unrated can be viewed. Unrated TV programs may include news, sports, political, religious, local and weather programs, emergency bulletins, public announcements, and programs without ratings. The Exempt option applies to both USA and Canadian unrated programs and Canadian programs rated E. 20 Graphics contained within this publication are for representation only. Chapter 3 Using the TV's Features Unlocked All unrated programs are available. Locked All unrated programs are not available. Note: You must remember to activate V-Chip for rating limits to take effect. Press the down arrow to highlight Exempt Prgms. Then press the right arrow to toggle between the lock and unlock icon. KidPass The KidPass feature allows parents to set a certain amount of time every day of the week that a child can watch TV. To set KidPass: 1. Select Parental Control from the main menu. 2. Select KidPass (the KIDPASS menu appears with Current Day highlighted). Note: If you can't select KidPass, you need to set the time. Highlight Go Back, press the right arrow, then select Time. Highlight Time, then enter the time using the number buttons. 3. Press the right arrow to select the current day. 4. Press the down arrow button to choose the day of the week. 5. After you've chosen the day of the week, press the right arrow to select the amount of time: Free and 00:30 up to 16:00 (30 minute increments). 6. When you're done setting KidPass, select Go Back. 7. Highlight KidPass active and press the right arrow to activate the KidPass settings (box has check mark). The KidPass takes effect immediately. When the time has expired, the TV shuts off. If you turn on the TV the same day it shut off, the password screen appears (enter the password used for V-Chip). V-Chip Active Selecting this option lets you activate and deactivate parental control settings. 1. From the PARENTAL CONTROL menu, press the up or down arrow to highlight V-Chip active. 2. Press the right or left arrow to turn on (box has check mark) or off (box doesn't have check mark) V-Chip active. If you do not activate V-Chip, none of the settings for V-Chip will take effect. If you forget your password you can reset it. Make sure the TV is off. Simultaneously press and hold VOL< on the TV's front panel and CLEAR on the remote for approximately 5 seconds. Enter a new password next time you access the PARENTAL CONTROL menu. Front Panel Lock Selecting this option lets you lock (disable) or unlock (enable) the TV's front panel. The remote still tunes to any channel. When using this as a Parental Control method, remove access to any remote that is capable of operating the television. 1. From the PARENTAL CONTROL menu, press the up or down arrow to highlight Lock Fr. Panel. 2. Press the right or left arrow to turn on (box has check mark) or off (box doesn't have check mark) front panel lock. Change Password Selecting this option lets you simply create a new password at any time. Once you enter a new password from Change Passwd. in the PARENTAL CONTROL menu it is the password you use until you change it again. Chapter 3 Graphics contained within this publication are for representation only. 21 Chapter 4: Using the TV's Menu System SOUND Go Back Treble Bass Balance Sound Type SAP Auto Vol Level Audio Output Int. Speakers Fixed . . . Stereo . . . Sound Menu Treble Increases or decreases the treble. Bass Increases or decreases the bass. Balance Press the right arrow to increase the audio output in the right speaker; press the left arrow to increase the audio output in the left speaker. Sound Type Press the right arrow to scroll through the available audio types, which control the way the sound comes through your speakers: Mono plays the sound in mono only. Use this setting when receiving broadcasts with weak stereo signals; Stereo to split the incoming stereo audio signal into left and right channels; and Enhanced for simulated surround sound. Most TV programs and recorded materials have stereo audio. The word Stereo appears on the TV when you tune to a program that is broadcast in stereo. SAP (Second Audio Program) Plays the program's audio in a second language, if one is available. The TV displays the word SAP when you tune to a program that is broadcast with SAP information. SAP audio is broadcast in mono. SAP is also used to broadcast a program's audio with descriptions of the video for the visually impaired. Press OK to turn SAP on or off. Auto Vol level (Auto Volume Level) Reduces the annoying blasts in volume during commercial breaks. Eliminates the need to constantly adjust volume control. Press OK to turn Auto Vol level on or off. Audio Output Press the right arrow to scroll through the available output settings: Fixed allows fixed output from the TV's audio output jacks to an external component such as a surround sound amplifier; and Variable allows variable output from the TV's audio output jacks. Int. Speakers (Internal Speakers) Turns the TV's internal speakers on or off. Turn off the internal speakers if you have an audio receiver or amplifier connected to the TV. Press OK to turn Int. Speakers on or off. PICTURE Go Back Picture Preset Auto Color Color Warmth Brightness Contrast Color Sharpness Tint Tilt Normal . . . Bright . . . Picture Menu The PICTURE menu options apply to the video for the main TV and video input selections. Picture Preset Press the right arrow to scroll through the available picture preset settings: Natural, Bright, Soft, and Personal. Choose the setting that is best for your viewing environment. Auto Color Turn this option on to automatically correct the color of the picture. This is especially useful for tracking realistic flesh tone colors as you switch channels. Graphics contained within this publication are for representation only. 22 Chapter 4 Using the TV's Menu System Color Warmth Press the right arrow to scroll through the color adjustments: Cool for a more blue palette of picture colors; Normal; and Warm for a more red palette of picture colors. Brightness Adjusts the brightness of the picture. Contrast Adjusts the difference between the light and dark areas of the picture. Color Adjusts the richness of the color. Sharpness Adjusts the crispness of the edges in the picture. Note: Sharpness is not available for component video input channels (CVID2 or VPORT). Tint Adjusts the balance between the red and green levels. Note: Tint is not available for component video input channels (CVID2 or VPORT). When you change any of these picture settings, the Picture Preset changes to Personal. Use the left or right arrow button to make adjustments. To return to the PICTURE menu, press the up or down arrow button. Tilt The TV has an extra large picture tube that makes it vulnerable to the effects of the Earth's magnetic field. You may need to adjust the picture tilt. SETUP Go Back Auto Ch. Search List & Labels Closed Caption Auto Tuning Language ... ... ... ... English . . . Setup Menu Auto Ch. Search (Auto Channel Search) Allows you to choose your signal type and begin an auto channel search. Signal Type Press the left or right arrow to toggle between the signal your TV is receiving. Choose Cable if you are currently using cable or a cable box for TV signals. Choose Antenna if you are currently using an off-air antenna for TV signals. Start Searches for channels the signal is receiving and stores them in the TV's channel list. Go to page 8 for more information. List & Labels Edit the channels in the list or choose labels for each channel. For example, if channel 12 is NBC, you can use this feature to label it NBC so it appears on-screen as part of the Channel Banner. To delete a channel from the channel list, highlight Channel and use the left or right arrow button to select the channel. Then highlight In list and press the OK button. The box should no longer display a check mark. To add a label to a channel, select the channel in the Channel option. Press the down arrow button to highlight Label. Press the right arrow button to highlight the first space. Use the up or down arrow button to ascend or descend through the characters. Continue to press the right arrow button to highlight the space and the up or down arrow button to add a character. Press OK when you're finished adding a label. Closed Caption Many programs are encoded with closedcaptioning information, which lets you display the audio portion of a program as text on the TV screen. Chapter 4 Graphics contained within this publication are for representation only. 23 Using the TV's Menu System