User manual REVOX RECONNECT M201 - IR INTERFACE

of Re:connect M201 IR-Interface Dominating Entertainment. Revox of Switzerland. M201 Re:connect M201 The M201 interface brings undreamed comfort into the world of your M51. It represents the interface connection between the M51 and M204 IR Receiver or the M218 keypad. This means that it is now possible to mount the M51 inside a cupboard or to communicate with it from locations in your living room where there is no direct sight line to the M51. The M204 is so sensitive that even the weakest of signals is enough to operate the M51 safely. In addition to the straight M204 IR Receiver, the M218 keypad can also be connected to the M201. In this way, there is a simple one-button operation of the M51 available, which you can integrate seamlessly into your existing switch and socket design. The in-built IR eye in the keypad additionally allows the use of a remote control. So it's no problem if you want to connect the M218 keypad as well as the high sensitivity M204 to the M201 IR interface. Up to 3 M204s or M218s can be connected in parallel. 1 M201 Re:connect Connection Connection: M201 with the M51 The M201 interface is connected using a noncrossed 4-core telephone cable with an RJ11 plug (6P4C modular, see Fig. 1) to the M51 LINK socket on the rear of the M51 A 2 metre cable is included. If required, however, you can use a cable up to a maximum of 100 meters in length. Connection: M201 with the IR receiver The connection to the IP receivers or the wall-mounted remote control is done using a screw-fixable Phoenix plugged connector (see Fig. 2). Revox recommends the use of a 2-core screened cable (microphone cable) where the screening is used as an earth. This cable may be a maximum of 30 metres long. Please refer to the rating plate for the correct cabling: VCC Data GND Positive voltage IR Signal Earth The maximum number of IR receivers for each M201 is 3. 1 In the case of using a IRreceiver M204, its jumper has to be removed! 2 2 M201 Re:connect Technical data Dimensions: Weight: VCC voltage: Power take-up: 43 x 21 x 52 mm (WxHxD, without plug) 25g 12-24 V (DC) 36 mA (without IR receiver) Max. cable length: 100m (M201-M51) Max. cable length: 30m (M201-IR receiver) Errors & technical modifications excepted Description: version 1.00 Supplied M201 IR Interface M51 Link cable 3-pin Phoenix plug User manual Guarantee The guarantee period is 24 months from the date of purchase. In the first case, you should contact your local specialist dealer. If he is unable to help you further, please return the M201 IR interface, carriage paid and without any accessories to Revox. Please remember always to include an exact description of the error as well as a return address. M201-Interface manual / Part no.: 10.30.3012 3