M202 M-Text Protocol M202 UPD Protocol General The commands start always with the no. of the room The parameters are separated by a colon [:] The command will be finished by a Carriage Return (13) xx = No. of room 00 01..08 09..16 17..24 25..32 Main Room Zone 1 Zone 2 Zone 3 Zone 4 e.g. 02 = room 2 of zone 1 e.g. 14 = room 6 of zone 2 e.g. 20 = room 4 of zone 3 e.g. 25 = room 1 of zone 4 Status quo: March 2007 V1.20g Connection - TCP/IP via Telnet Port 23 (for debugging and testing) - TCP/IP via Port 5524 - UDP/IP via the ports 4032,5524,6536,7728,8728,10308,18042,24022,27944,31286 Using Windows: Start --> Execute --> telnet IP (e.g.: telnet 192.168.1.50) Switching between M-Text and -Link protocol To force the M202 to switch over to the M-Text protocol at least one Carriage Return (13) must be sent. If a Start of Text (2) will be sent, the M202 switches back to the M-Link protocol. Though both protocols can be used and is therefor backward compatible. Examples: 00:IR:VOLUME_UP 32:IR:VOLUME_DOWN 20:SELECT:TUNER Increase volume of main room Decrease volume of room 8, zone 4 Select source Tuner for room 4, zone 3 Infrared Commands xx:IR:0 xx:IR:1 xx:IR:2 xx:IR:3 xx:IR:4 xx:IR:5 xx:IR:6 xx:IR:7 xx:IR:8 xx:IR:9 xx:IR:OFF xx:IR:MUTE xx:IR:VOLUME_UP xx:IR:VOLUME_DOWN xx:IR:BASS_UP xx:IR:BASS_DOWN xx:IR:TREBLE_UP Only for Multiroom amplifier M219 ­ not main room! Only for Multiroom amplifier M219 ­ not main room! Only for Multiroom amplifier M219 ­ not main room! 1 M202 xx:IR:TREBLE_DOWN xx:IR:BALANCE_RIGHT xx:IR:BALANCE_LEFT xx:IR:NEXT xx:IR:PREVIOUS xx:IR:NAVIGATE_UP xx:IR:NAVIGATE_DOWN xx:IR:NAVIGATE_LEFT xx:IR:NAVIGATE_RIGHT xx:IR:PLAY xx:IR:F1_RED xx:IR:F2_GREEN xx:IR:F3_YELLOW xx:IR:F4_BLUE xx:IR:PAUSE xx:IR:SCAN_DOWN xx:IR:SCAN_UP xx:IR:STOP Source Select Commands xx:SELECT:TV xx:SELECT:VIDEO1 xx:SELECT:VIDEO2 xx:SELECT:VIDEO3 xx:SELECT:VIDEO4 xx:SELECT:VIDEO5 xx:SELECT:VIDEO6 xx:SELECT:AUX1 xx:SELECT:TUNER xx:SELECT:TAPE xx:SELECT:LOCAL xx:SELECT:CD xx:SELECT:AUX2 xx:SELECT:AUX3 xx:SELECT:LIGHT xx:SELECT:LOCAL_1 xx:SELECT:LOCAL_2 xx:SELECT:LOCAL_3 Set Commands xx:SET:VOLUME:yy 00:SET:DSP_MODE:yy yy = Volume 0..40 yy = DSP-Mode M-Text Protocol Only for Multiroom amplifier M219 ­ not main room! Only for Multiroom amplifier M219 ­ not main room! Only for Multiroom amplifier M219 ­ not main room! Only for Multiroom amplifier M219 ­ not main room! Only for Multiroom amplifier M219 ­ not main room! Only for Multiroom amplifier M219 ­ not main room! Only for main room (00)! 04 = PRO LOGIC 05 = PL MOVIE 06 = PL MUSIC 07 = PL MATRIX 08 = DSP STEREO / PURE ANALOG 09 = DSP X-STEREO 10 = DSP SPATIAL Do not use any other DSP-Mode figures as this might lead to errors of the 5.1 Decoder module. Use the DSP-Mode command only in conjunction with the 5.1 Decoder module MK2 (ACC-1.551.084.01) 2 M202 System Commands xx:SYSTEM_OFF M-Text Protocol !! Addressed commands for certain M51-Slots!! xx:SLOT:yy:PLAYLIST:NUMBER:zz Not implemented yet!! yy = Slot of Server module zz = No. of Playlist Error message xx:OK: xx:ERROR:COMMAND: xx:ERROR:ROOM: xx:ERROR:SYNTAX: xx:ERROR:VALUE: xx:ERROR:NOT_APPLICABLE: Command executed Unknown command Room number not valid Missing parameter Parameter not valid Command not applicable for this room Status message xx:STATUS:ROOM:yy:z:aaaa:bbbb: xx = Room number yy = Volume 00..40 z = Power Flag (0=off, 1=on) a = Source Name, always 16 signs b = Source Info, always 16 signs Status request xx:GET_STATUS:ROOM xx:GET_STATUS:ALL xx:PARTY * * not implemented yet Request of status for a certain room xx Request of status for all rooms Activate Party Mode for a certain zone, in which room xx is located 3