User manual REVOX RECONNECT - BROCHURE

Re:connect interfaces Re:connect M200 Re:connect M201 Re:connect M202 Re:connect M204 Re:connect M219 Re:connect M300/301 Communication is everything. Even in your house. Re:connect interfaces The intelligent interfaces. Dominating Entertainment. Revox of Switzerland. M200 General data Dimensions Weight Max. cable length Max. cable length Relay: A-B In addition to this, external house management systems can be used to control the Switching voltage complete Revox system through the Re:connect M200. Parallel to this, the interMax. AC current face gives a return message to the house management system in order to show the Max. DC current Re:system M51 output on a display. Thus, the Revox World can be mirrored on practically every primary control system, whether that is an IT system, an EIB bus INPUT A-B or some other control system. Input voltage The Re:connect M200 can also carry out secondary control duties such as dimming Threshold voltage the lights or lowering the blind when a DVD is being played or muting the M51 Input resistance when the telephone rings. OUTPUT Output voltage Output current This interface fulfils a whole range of tasks. It can, for example, control most of the Revox video products. The Re:connect M200 is connected to Re:system M51 source management and a Re:ception plasma 42 is then connected, for example. In this way, each input made at the Re:system M51 is passed on to the Re:ception plasma 42. Both audio and video signals are correctly transmitted with a single press on a button at the Re:system M51. Re:connect M200 140 x 65 x 40 mm (W x H x D) 330 g 100m (M200-M51) 30m (M200-IR receiver) Max. 42 Volt 8 A (ohmic or inductive load) 8 A (ohmic load)/4 A (inductive load) Max. 24 VDC 5 VDC 2 kOhm 0­10 VDC 10 mA M201 Re:connect M201 Technical data Dimensions External Revox IR receivers can be connected using this interface. This is particularly relevant if the IR signal can`t reach the system directly, as with larger rooms for Weight example, or if the M51 has been built into a piece of furniture. VCC voltage The Re:connect M204 ir or the wall-mounted Re:control M218 are used as IR receivers. Up to 5 receivers can be connected to the M201, which guarantees perfect Power consumption operation even in very large or L-shaped rooms or on stairwells. Max. cable length Thanks to its compact size, the Re:connect M201 can be integrated just about any- Max. cable length where. As with all other interfaces, the Re:connect M201 is a component of the Re:system M51 source management and is controlled by it. 43 x 21 x 52 mm (W x H x D, without plug) 25g 12­24 VDC, depending on the operational state of the M51 36 mA (without IR receiver) 100m (M201-M51) 30m (M201-IR receiver) M202 Re:connect M202 Technical data Dimensions The Re:system M51 source management can be integrated into an IT network with the Re:connect M202. It is given its own IP address through the Configuration menu Weight and is this an identifiable element in the network. Max. cable length Control, including control of the Revox Multiroom system can now be carried out through the Re:connect M202. This allows PCs or Palmtops to access and control the Revox system, through a WLAN as well of course. A constituent part of the Re:connect M202 is the Re:control M230 software for Windows 2000/XP or the Re:control M231 for Windows CE for Palmtops. Both softwares show the Re:system M51 display 1:1, guaranteeing you uniform operation. Using the Re:control software, the Revox Multiroom system can also access all additional rooms from one central location. All the rooms are shown with their defined names in a selection menu. Other house management systems that have their own IP address can also control the Revox system through the M51 Link protocol. 140 x 65 x 40 mm (W x H x D) 250 g 100m (M202-M51) M204 Re:connect M204 ir Technical data Dimensions Revox offers a wide choice of different IR receivers; flange-mounting for integration into furniture, in a small aluminium housing for positioning on a shelf, for example, M204 Aluminium housing (incl. cable) in kit form for assembly into light switch housings or for building into Revox build-in M204 Flange speakers. The Re:connect M204 ir can be used everywhere, where a discrete and unobtrusive installation is called for. Connection options If required, Revox can deliver the Re:sound I inwall speaker with a Re:connect Re:connect M200 M204 IR receiver already integrated. Commands are sent to the Re:system M51 using the Re:control M207 or another Revox remote control unit. This type of IR Re:connect M201 receiver is particularly useful in external applications as it is completely hidden Re:connect M219 behind the metal grille. The Re:connect M204 ir is always used if the Re:system M51 source management is installed concealed and the integrated IR receiver cannot be reached or if control from an additional room in the Revox Multiroom system should only be done using a remote control. 30 x 30 x 55 mm (W x H x D) 30 mm external diameter 20 mm drilling diameter M219 Re:connect M219 Amplifier part Music power Every additional room in the Revox Multiroom system needs a Re:connect M219 Additional room amplifier. This is connected to the Multiroom network with CAT7 Frequency response cable and then when requested, the Re:system M51 source management makes the Suppression factor audio signal available to the corresponding room. Harmonic distortion The Re:connect M219 has two powerful outputs with 2 x 100 watt power in Class D technology. These outputs developed by Revox produce audio data equivalent to that produced by analogue outputs, enabling you to provide sound for larger rooms General M219 data without any problems. Supply voltage The Re:control M217 or M218 jung, feller or gira control units are also connected to Fuse rating the Re:connect M219. They give you an intuitive and uniform operation whilst at Power consumption: the same time giving feedback about the active sources. The tuner station name, the - Operation number of the track currently being played from a CD or, when you are using a Re:source M37 or M57 audio server, even the name of the artist and the track can all be called up. - Standby Up to three local sources can be connected in each room using the Re:connect M219, Operating conditions which are then only available in the corresponding room. This enables you to connect a television or a PC in your home office, for example. Dimensions Weight 2 x 100 Watt at 4 Ohm 10 Hz­25 kHz­3 dB > 200 at 8 Ohm/1 kHz 0.03 % at 10 Watt 230 V, 115 V 0.5 A slow-acting, 1 A slow-acting Max. 115 Watt 7W (Room speaker without additional device) 2W +10­+40 °C (Humidity rating in accordance with DIN 40040) W: 225 mm, H: 60 mm, D: 160 mm 2.4 kg M300/301 Re:connect M300/301 Up to seven video sources can be controlled with the Re:connect M300/301 video switch. One is reserved exclusively for Re:source dvd Re:system M51 module, which also controls the video switch. Other third-party devices such as a SAT receiver, Video recorder, DVD receiver or Playstation can be connected to the other inputs. The Re:system M51 controller permanently feeds the audio signal to the DVD module and thus to the amplifier through as well as providing the video signal on the video track output for different Replay formats picture screen devices. S-VHS The Re:connect M300/301 has different inputs. Inputs 1 and 2 have integrated out- CVBS puts and a video source with a YUV component output can also be connected RGB through inputs 5 and 6. YCrCb The feed signal is permanently available at the Re:connect M300/301 output for further transmission. In addition to this, the output area has an audio input, in order Systems to be able to feed the audio signal from a TV tuner into the video switch. PAL Operation of a large home cinema is made very much easier by this interface. All signals are switched with the press of a button at the Re:system M51, such that you NTSC don`t have bother about switching the inputs between the amplifier and the amplifier. Audio data Revox offers two version of the Re:connect M300/301. The M300 has a SCART Audio bandwidth input while the M301 has various phono inputs. Unweighted signal-to-noise ratio Channel separation Distortion factor (THD) Signal amplification Technical data Video data Video bandwidth Distortion factor SN ratio Up to 10 MHz/± 3 dB (HDTV-enabled) < 0.1 % > 60 dB (typ. 5 MHz) 20 Hz­20 kHz/± 1 dB > 100 dB (typ. 1 Vpp) > 70 dB < 0.02 % 1 Summary Re:connect M51 interfaces Re:system M51 source management offers a completely new concept in Home Entertainment. All audio and video components are controlled from a single device. It can be integrated with other systems through the Re:connect interfaces, ranging from the connection of video and audio sources right up to integration into complex IT or house management systems. Re:system M51 source management outputs are offered as analogue or digital versions. Dominating Entertainment. Renowned for its unique design and ingeniously constructed products, the Revox brand offers the ultimate in multi-system compatibility, adhering to the simple underlying philosophy that whatever the function, whatever the technology, anything is possible. Pivotal to this Revox philosophy is a drive to create no-fuss, minimalistic solutions, unique the world over in terms of technological edge and unparalleled Revox professionalism. Revox: putting function and fascination into entertainment. Art.-Nr. 10.29.6070 The colours shown can be derived from the original. Product subject to modification. Errors and omissions excepted. Printed in Germany. Revox GmbH Am Krebsgraben 15 D-78048 VS-Villingen Tel.: +49 7721 8704-0 info@revox.de Revox (Schweiz) AG Althardstrasse 146 CH-8105 Regensdorf Tel.: +41 44 871 66 11 info@revox.ch