551/700 Operating Instructions COPY REFERENCE Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. RICOH COMPANY, LTD. 15-5, 1 chome, Minami-Aoyama, Minato-ku, Tokyo Telephone: Tokyo 3479-3111 551/700 Operating Instructions Overseas Affiliates U.S.A. RICOH CORPORATION 5 Dedrick Place West Caldwell, New Jersey 07006 Phone: +1-973-882-2000 The Netherlands RICOH EUROPE B.V. Groenelaan 3, 1186 AA, Amstelveen Phone: +31-(0)20-5474111 United Kingdom RICOH UK LTD. Ricoh House, 1 Plane Tree Crescent, Feltham, Middlesex, TW13 7HG Phone: +44-(0)181-261-4000 Germany RICOH DEUTSCHLAND GmbH Mergenthalerallee 38-40, 65760 Eschborn Phone: +49-(0)6196-9060 France RICOH FRANCE S.A. 383, Avenue du Général de Gaulle BP 307-92143 Clamart Cedex Phone: +33-(0)1-40-94-38-38 Spain RICOH ESPAÑA S.A. Avda. Litoral Mar, 12-14, 08005 Barcelona Phone: +34-(0)93-295-7600 Italy RICOH ITALIA SpA Via della Metallurgia 12, 37139 Verona Phone: +39-045-8181500 Hong Kong RICOH HONG KONG LTD. 23/F., China Overseas Building, 139, Hennessy Road, Wan Chai, Hong Kong Phone: +852-2862-2888 Singapore RICOH ASIA PACIFIC PTE.LTD. 260 Orchard Road, #15-01/02 The Heeren, Singapore 238855 Phone: +65-830-5888 Printed in Japan UE USA A293-7207 Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. Notes Some illustrations may be slightly different from your machine. Certain options may not be available in some countries. For details, please contact your local dealer. Operator Safety This machine is considered a CDRH class 1 laser device, safe for office/EDP use. The machine contains two GaAIAs laser diodes, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety precautions and interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator. Laser Safety: The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis and laser subsystems to the factory or service depot when replacement or the optical subsystem is required. Warning: Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. Notes: The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, see P.1 "Machine Types".) · · Type1: Aficio 551 Type2: Aficio 700 Certain types might not be available in some countries. For details, please contact your local dealer. Two kinds of size notation are employed in this manual. With this machine refer to the inch version. For good copy quality, Ricoh recommends that you use genuine Ricoh toner. Ricoh shall not be responsible for any damage or expense that might result from the use of parts other than genuine Ricoh parts in your Ricoh office product. Power Source 120V, 60Hz, 20A or more Please be sure to connect the power cord to a power source as above. For details about power source, see P.335 "Power Connection". In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a means POWER ON. c means STAND BY. Copyright © 2000 Ricoh Co., Ltd. Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. Notes Some illustrations may be slightly different from your machine. Certain options may not be available in some countries. For details, please contact your local dealer. Operator Safety This machine is considered a CDRH class 1 laser device, safe for office/EDP use. The machine contains two GaAIAs laser diodes, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety precautions and interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator. Laser Safety: The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis and laser subsystems to the factory or service depot when replacement or the optical subsystem is required. Warning: Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. Notes: The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, see P.1 "Machine Types".) · · Type1: 2055DP, 3355 Type2: 2070DP, 3370 Certain types might not be available in some countries. For details, please contact your local dealer. Two kinds of size notation are employed in this manual. With this machine refer to the inch version. For good copy quality, Savin recommends that you use genuine toner. Savin shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts in your office product. Power Source 120V, 60Hz, 20A or more Please be sure to connect the power cord to a power source as above. For details about power source, see P.335 "Power Connection". Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a means POWER ON. c means STAND BY. SAVIN CORPORATION 333 Ludlow Street, Stamford, CT 06904 203-967-5000 Safety Information When using your equipment, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: R WARNING: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. R CAUTION: Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. R WARNING: · Connect the power cord directly into a wall outlet and never use an extension cord. · Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or otherwise damaged. · To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or screws other than those specified in this manual. · Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of the following conditions exists: · You spill something into the equipment. · You suspect that your equipment needs service or repair. · Your equipment's cover has been damaged. · Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open flame. · Disposal can take place at our authorized dealer or at appropriate collection sites. · Dispose of the used toner bottle in accordance with the local regulation. i R CAUTION: · Protect the equipment from dampness or wet weather, such as rain, snow, and so on. · Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment. · When you disconnect the power plug from the wall outlet, always pull the plug (not the cable). · Do not allow paper clips, staples, or other small metallic objects to fall inside the equipment. · Keep toner (used or unused) and toner bottle out of the reach of children. · For environmental reasons, do not dispose of the equipment or expended supply waste at household waste collection points. Disposal can take place at an authorized dealer or at appropriate collection sites. · The inside of the machine could be very hot. Do not touch the parts with a label indicating the "hot surface". Otherwise it could cause a personal burn. · Our products are engineered to meet high standards of quality and functionality, and we recommend that you only use the expendable supplies available at an authorized dealer. ii How to Read this Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are included in the Safety Information section. R CAUTION: This symbol indicates a potentially hazardous situation that might result in minor or moderate injury or property damage that does not involve personal injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are included in the Safety Information section. · WARNINGS and CAUTIONS are notes for your safety. Important If this instruction is not followed, paper might be misfeed, originals might be damaged, or data might be lost. Be sure to read this. Preparation This symbol indicates the prior knowledge or preparations required before operating. Note This symbol indicates precautions for operation or actions to take after misoperation. Limitation This symbol indicates numerical limits, functions that cannot be used together, or conditions in which a particular function cannot be used. Reference This symbol indicates a reference. [ ] Keys that appear on the machine's display panel. { } Keys built into the machine's control panel. iii TABLE OF CONTENTS Machine Types........................................................................................... 1 What You Can Do with This Machine (Copy Mode)................................ 2 Guide To Components .............................................................................. 4 Output Tray Guide......................................................................................... 6 Options ....................................................................................................... 7 Control Panel ............................................................................................. 8 Display Panel ........................................................................................... 10 Displays and Key Operations ...................................................................... 10 Function List Based on Options ............................................................ 13 1. Basics Turning On the Power ............................................................................. Turning On the Main Power ........................................................................ Starting the Machine ................................................................................... Shutting Down the Machine ........................................................................ Turning Off the Main Power ........................................................................ Originals ................................................................................................... Sizes and Weights of Recommended Originals .......................................... Sizes Detectable by the Auto Paper Select ................................................ Missing Image Area .................................................................................... Copy Paper............................................................................................... Recommended Paper Sizes and Types...................................................... Non-recommended Paper............................................ ...