User manual RICOH JP1030

JP1030 OPERATING INSTRUCTIONS TSLH02HE Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. Notes: Some illustrations may be slightly different from your machine. Certain options may not be available in some countries. For details, please contact your local dealer. Two kinds of size notation are employed in this manual. With this machine refer to the Inch version. For good print quality, Ricoh recommends that you use genuine Ricoh master and ink. Ricoh shall not be responsible for any damage or expense that might result from the use of parts other than genuine Ricoh parts in your Ricoh office product. Power Source: 120 V, 60 Hz, 2.5 A or more Please be sure to connect the power cord to a power source as above. For details about power source, see P.110 "Power connection". Note to users in the United States of America Notice: This equipment has been tested and found to comply with the limits for a Class A digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note to users in Canada Note: This Class A digital apparatus complies with Canadian ICES-003. Remarque concernant les utilisateurs au Canada Avertissement: Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. In accordance with ISO Standard 7001, this machine uses the following symbols for the main switch: a means POWER ON. b means POWER OFF. Copyright © 1998 Ricoh Co., Ltd. RICOH COMPANY, LTD. 15-5, 1 chome, Minami-Aoyama, Minato-ku, Tokyo 107, Japan Telephone: Tokyo 3479-3111 JP1030 OPERATING INSTRUCTIONS Overseas Affiliates U.S.A. RICOH CORPORATION 5 Dedrick Place West Caldwell, New Jersey 07006 Phone: +1-973-882-2000 The Netherlands RICOH EUROPE B.V. Groenelaan 3, 1186 AA, Amstelveen Phone: +31-(0)20-5474111 United Kingdom RICOH UK LTD. Ricoh House, 1 Plane Tree Crescent, Feltham, Middlesex, TW13 7HG Phone: +44-(0)181-261-4000 Germany RICOH DEUTSCHLAND GmbH Mergenthaler Allee 38-40, 65760 Eschborn Phone: +49-(0)6196-9060 France RICOH FRANCE S.A. 383, Avenue du Général de Gaulle BP 307-92143 Clamart Cedex Phone: +33-(0)1-40-94-38-38 Spain RICOH ESPAÑA S.A. Av.Litoral Mar, 12-14, 08005 Barcelona Phone: +34-(0)93-295-7600 Italy RICOH ITALIA SpA Viale Della Metallurgia 12, Zona Basson 37139 Verona Phone: +39-(0)45-8181500 Hong Kong RICOH HONG KONG LTD. 23/F., China Overseas Building, 139, Hennessy Road, Wan Chai, Hong Kong Phone: +852-2862-2888 Singapore RICOH ASIA PACIFIC PTE.LTD. 260 Orchard Road, #15-01/02 The Heeren, Singapore 238855 Phone: +65-830-5888 Printed in Japan UE USA C231-8607A Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. Notes: Some illustrations may be slightly different from your machine. Certain options may not be available in some countries. For details, please contact your local dealer. Two kinds of size notation are employed in this manual. With this machine refer to the Inch version. For good print quality, Gestetner recommends that you use genuine Gestetner master and ink. Gestetner shall not be responsible for any damage or expense that might result from the use of parts other than genuine Gestetner parts in your Gestetner office product. Power Source: 120 V, 60 Hz, 2.5 A or more Please be sure to connect the power cord to a power source as above. For details about power source, see P.110 "Power connection". Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Please read the Safety Information before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. Notes: Some illustrations may be slightly different from your machine. Certain options may not be available in some countries. For details, please contact your local dealer. Two kinds of size notation are employed in this manual. With this machine refer to the Inch version. For good print quality, Savin recommends that you use genuine Savin master and ink. Savin shall not be responsible for any damage or expense that might result from the use of parts other than genuine Savin parts in your Savin office product. Power Source: 120 V, 60 Hz, 2.5 A or more Please be sure to connect the power cord to a power source as above. For details about power source, see P.110 "Power connection". Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. Note to users in the United States of America Notice: This equipment has been tested and found to comply with the limits for a Class A digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, might cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note to users in Canada Note: This Class A digital apparatus complies with Canadian ICES-003. Remarque concernant les utilisateurs au Canada Avertissement: Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. In accordance with ISO Standard 7001, this machine uses the following symbols for the main switch: a means POWER ON. b means POWER OFF. SAVIN CORPORATION 333 Ludlow Street Stamford CT06904 203­967­5000 Safety Information When using your machine, the following safety precautions should be always be followed. Safety During Operation In this manual, the following important symbols are used: R WARNING: Ignoring this warning could cause serious injury or even death. R CAUTION: Ignoring this caution could cause injury or damage to property. Examples Of Indications Symbols R mean a situation that requires you take care. Do NOT carry out the operation represented by this symbol m. This example means "Do not take apart". Symbols $ mean you MUST perform this operation. This example means "You must remove the wall plug". i R WARNING: · Only connect the machine to the power source described on the inside front cover of this manual. · Avoid multi-wiring. · Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it, pull it hard or bend it more than necessary. These actions could cause an electric shock or fire. · Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might occur. · Make sure the wall outlet is near the machine and freely accessible so that in event of an emergency it can be unplugged easily. · Do not remove any covers or screws other than those specified in this manual. Some parts of the machine are at a high voltage and could give you an electric shock. When the machine needs to be checked, adjusted, or repaired, contact your service representative. · Do not take apart or attempt any modifications to this machine. There is a risk of fire, electric shock, explosion or loss of sight. · If the machine looks damaged or breaks down, smoke is coming out, there is a strange smell or anything looks unusual, immediately turn off the main switch then unplug the power cord from the wall. Do not continue using the machine in this condition. Contact your service representative. · If metal, liquid or foreign matter falls into the machine, turn off the main switch and unplug the main power cord. Contact your service representative. Do not keep using the machine with a fault or defect. · Do not put any metal objects or containers holding water (e.g. vases, flowerpots, glasses) on the machine. If the contents fall inside the machine, a fire or electric shock could occur. ii R CAUTION: · Keep the machine away from humidity and dust. A fire or an electric shock might occur. · Do not place the machine on an unstable or tilted surface. If it topples over, it could cause injury. · After you move the machine, fix it with the caster fixture. Otherwise, the machine might move or come down to cause a personal injury. · When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric shock. · When the machine will not be used for a long time, unplug the power cord. · When you pull out the plug from the socket, grip the plug to avoid damaging the cord and causing fire or electric shock. · If you use the machine in a confined space, make sure there is a continuous air turnover. · Do not reuse stapled paper. Do not use aluminum foil, carboncontaining paper or other conductive paper. Otherwise, a fire might occur. · This machine has been tested for safety using this supplier's parts and consumables. We recommend you only use these specified supplies. · This equipment is only to be installed by a qualified service personnel. · Deliver to collection point for waste products. Do not be disposed of via domestic refuse collection. · If ink comes into contact with your eyes, rinse immediately in running water. In the case of any abnormal symptoms, consult a doctor. iii · Keep the ink or ink container out of reach of children. · If ink is ingested, force vomiting by drinking a strong saline solution and consult a doctor immediately. · Be careful not to cut yourself on any sharp edges when you reach inside the machine to remove misfed sheets of paper or masters. · Do not touch the belt at the end of the paper delivery table. Do not insert your hands under the paper feed table or the paper delivery table. You might be injured. iv How To Read This Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section. R CAUTION: This symbol indicates a potentially hazardous situation that might result in minor or moderate injury or property damage that does not involve personal injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section. * The statements above are notes for your safety. Important If this instruction is not followed, paper might be misfed, originals might be damaged, or data might be lost. Be sure to read this. Preparation This symbol indicates the prior knowledge or preparations required before operating. Note This symbol indicates precautions for operation, or actions to take after misoperation. Limitation This symbol indicates numerical limits, functions that cannot be used together, or conditions in which a particular function cannot be used. Reference This symbol indicates a reference. [ ] Keys that appear on the machine's panel display. { } Keys built into the machine's operation panel. v What You Can Do With This Machine y Standard Printing See P.5 "Standard Printing". y Adjusting The Print Image Position See P.8 "Adjusting The Print Image Position". y Adjusting The Print Image Density See P.10 "Adjusting The Print Image Density". y Making Half-tone Prints See P.11 "Tint Mode--Making Half-tone Prints". y Making Clear Prints See P.12 "Fine Mode--Making Clear Prints". y Changing The Print Speed See P.13 "Changing The Printing Speed". y Reducing And Enlarging Using Preset Ratios See P.15 "Preset Reduce/Enlarge--Reducing And Enlarging Using Preset Ratios". GRREDU0E GRENLA0E y Erasing Center And Edge Margins See P.17 "Center/Edge Erase--Erasing Center And Edge Margins". GRMARG0E vi y Erasing Edge Margins See P.19 "Edge Erase--Erasing Edge Margins". y Erasing The Shadow Of Pasted Originals See P.21 "Paste Shadow Erase--Erasing The Shadow Of Pasted Originals". y Printing On Thick Or Thin Paper See P.22 "Printing On Thick Or Thin Paper". y Selecting Original Type See P.23 "Selecting Original Type". y Ink Saving See P.24 "Economy Mode--Ink Saving". y Printing From Several Originals At Once See P.25 "Auto Cycle--Printing From Several Originals At Once". y Group Printing From The Same Original See P.27 "Class Mode--Group Printing From The Same Original". R R R R R R R GRCLAS0E y Group Printing From Different Originals See P.29 "Memory Mode--Group Printing From Different Originals". A B C D A C B D GRCLAS1E vii y Combining Originals Into One Print See P.32 "Combine Copies--Combining 2 Originals Into One Print". 1 2 12 GRCOMB0E y Skip Feed Printing See P.35 "Skip Feed Printing". y Storing Your Print Settings In Memory See P.36 "Program--Storing Your Print Settings In Memory". y Printing Secret Documents See P.40 "Security Mode--Printing Secret Documents". y Making Color Prints See P.49 "Making Color Prints". y Printing In Two Colors See P.51 "Printing In Two Colors". viii Guide To Components Machine Exterior 10 2 3 4 5 6 7 1 8 9 TSLH01EE 1. Front Door Open for access to the inside of the machine. 5. Feed Roller Pressure Lever Use to adjust the contact pressure of the paper feed roller according to paper thickness. 2. Operation Panel Operator controls and indicators are located here. See P.xii "Operation Panel". 6. Paper Feed Side Plates Use to prevent paper skew. 3. Platen Cover Lower this cover over an original before printing. 7. Paper Feed Table Set paper on this table for printing. 4. Original Table Release Lever Use to open the original table unit when installing the master. 8. Side Table Fine Adjusting Dial Use to shift the paper feed table sideways. 9. Paper Feed Table Down key Press to lower the paper feed table. ix 10. Behind Cover Flip up when you use the keys underneath. Machine Interior 1 8 2 3 7 4 TSLH01DE 5 6 1. Document Feeder (Option) Original inserted into the document feeder are individually and automatically fed onto and removed from the exposure glass. See P.41 "Printing Using The Optional 30 Originals Document Feeder". 5. Main Switch Use to turn the power on or off. 6. Drum Unit The master is wrapped around this unit. 7. Drum Unit Lock Lever Lift to unlock and pull out the drum unit. 2. Paper Delivery Side Plates Use to align the prints on the paper delivery table. 8. Ink Holder Set the ink cartridge in this holder. 3. Paper Delivery End Plate Use to align the leading edge of prints. 4. Paper Delivery Table Completed prints are delivered here. x Options y 30 Originals Document Feeder TSLP015E Note Ì Other options: · Color Drum: LG drum · Color Drum: B4 drum · Tape Dispenser · Key Counter xi Operation Panel Keys 1 2 3 45 15 6 7 8 9 10 11 12 13 14 20 21 1. {Security} key } Press to make prints of secret documents. See P.40 "Security Mode--Printing Secret Documents". 6. {Skip Feed} key } Press to select skip feed printing. See P.35 "Skip Feed Printing". 2. {Paste Shadow Erase} key } Press to erase the shadow of pasted originals. See P.21 "Paste Shadow Erase-- Erasing The Shadow Of Pasted Originals". 7. {Center/Edge Erase} key } Press to print book originals that have a solid image on the center or edges. See P.17 "Center/Edge Erase--Erasing Center And Edge Margins". 3. {Tint} key } Press to make half-tone prints. See P.11 "Tint Mode--Making Half-tone Prints". 8. { } and { } keys ( Scroll keys) Press to select size and direction of paper or original in Center/Edge Erase. 4. {Image Density} key } Press to make prints darker or lighter. See P.10 "Adjusting The Print Image Density". 9. {Reduce} key } Press to reduce the image. See P.15 "Preset Reduce/Enlarge--Reducing And Enlarging Using Preset Ratios". 5. Check Indicator This indicator lights when you have selected one or more of the functions accessed by lifting the flip up cover and pressing the keys underneath (e. g. {Security} key, {Paste Shadow Erase} key etc.). This lets you know whether one or more of these functions is selected, even if the cover is lowered. 10. {Full Size} key } Press to make full size prints. 11. {Enlarge} key } Press to enlarge the image. See P.15 "Preset Reduce/Enlarge--Reducing And Enlarging Using Preset Ratios". Press to save ink. See P.24 "Economy Mode--Ink Saving". 12. {Economy} key } xii 16 17 18 19 22 23 24 25 26 TSLS021N 13. {Type of Original} key } Press to select Letter, Photo, or Letter/ Photo mode. See P.23 "Selecting Original Type". 20. {W} and {V} keys (Speed keys) Press to adjust the printing speed. See "Print Speed" in P.115 "Main Frame". 14. {Fine} key } 21. {Memory/Class} key } Press to select Memory or Class mode. See P.27 "Class Mode--Group Printing From The Same Original" or P.29 "Memory Mode--Group Printing From Different Originals". Press to select the fine image. See P.12 "Fine Mode--Making Clear Prints". 15. {Image Position} key } Press to shift the image forwards or backwards. See P.8 "Adjusting The Print Image Position". 22. {Number} keys } Press to enter the desired number of prints and data for selected modes. 16. {Program} key } Press to input or recall user programs. See P.36 "Program--Storing Your Print Settings In Memory". 23. {#} key } Use to enter data in selected modes. 17. {Clear Modes} key } Press to clear the previously entered job settings. 24. {Clear/Stop} key } While entering numbers, press to cancel a number you have entered. While copying, press to stop copying. 18. {Auto Cycle} key } Use to process the master and make prints automatically. See P.25 "Auto Cycle--Printing From Several Originals At Once". 25. {Start} key } Press to make a master. 26. {Print} key } Press to start printing. 19. {Proof} key } Press to make proof prints. xiii