User manual ROLAND JUNO-G

Owner's Manual Thank you, and congratulations on your choice of the Roland JUNO-G. 201a Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. 2; p. 4). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Conventions Used in This Manual Operating buttons are enclosed by square brackets [ ]; e.g., [REC]. Reference pages are indicated by (p. **). The following symbols are used. This indicates an important note; be sure to read it. This indicates a memo regarding the setting or function; read it as desired. This indicates a useful hint for operation; read it as necessary. This indicates information for your reference; read it as necessary. This indicates an explanation of a term; read it as necessary. 985 * The explanations in this manual include illustrations that depict what should typically be shown by the display. Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer sounds), so what you actually see in the display may not always match what appears in the manual. 202 Copyright © 2006 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. For the U.K. IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug. USING THE UNIT SAFELY Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. * Material damage refers other adverse effects respect to the home furnishings, as well animals or pets. to damage or caused with and all its to domestic The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled. The symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet. 001 006 · Before using this unit, make sure to read the instructions below, and the Owner's Manual. · .......................................................................................................... 002d · Do not open or perform any internal modifications on the unit or its AC adaptor. (The only exception would be where this manual provides specific instructions which should be followed in order to put in place userinstallable options; see p. 174, p. 176.) Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the "Information" page. Never use or store the unit in places that are: · Subject to temperature extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are · Damp (e.g., baths, washrooms, on wet floors); or are · Humid; or are · Exposed to rain; or are · Dusty; or are · Subject to high levels of vibration. This unit should be used only with a stand (KS-12) that is recommended by Roland. When using the unit with a stand (KS-12) recommended by Roland, the rack or stand must be carefully placed so it is level and sure to remain stable. If not using a rack or stand, you still need to make sure that any location you choose for placing the unit provides a level surface that will properly support the unit, and keep it from wobbling. Be sure to use only the AC adaptor supplied with the unit. Also, make sure the line voltage at the installation matches the input voltage specified on the AC adaptor's body. Other AC adaptors may use a different polarity, or be designed for a different voltage, so their use could result in damage, malfunction, or electric shock. Use only the attached power-supply cord. Also, the supplied power cord must not be used with any other device. Do not excessively twist or bend the power cord, nor place heavy objects on it. Doing so can damage the cord, producing severed elements and short circuits. Damaged cords are fire and shock hazards! This unit, either alone or in combination with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level, or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should immediately stop using the unit, and consult an audiologist. .......................................................................................................... 008c · .......................................................................................................... 003 · .......................................................................................................... 008e .......................................................................................................... 004 · · .......................................................................................................... 009 · .......................................................................................................... 010 · .......................................................................................................... 005 · 2 011 101b · Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the unit. When you install the Wave Expansion Board (SRX series) or memory (DIMM), please be careful particularly. · The unit and the AC adaptor should be located so their location or position does not interfere with their proper ventilation. This (JUNO-G) for use only with Roland stand (KS-12). Use with other stands is capable of resulting in instability causing possible injury. Always grasp only the plug on the AC adaptor cord when plugging into, or unplugging from, an outlet or this unit. At regular intervals, you should unplug the AC adaptor and clean it by using a dry cloth to wipe all dust and other accumulations away from its prongs. Also, disconnect the power plug from the power outlet whenever the unit is to remain unused for an extended period of time. Any accumulation of dust between the power plug and the power outlet can result in poor insulation and lead to fire. Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children. Never climb on top of, nor place heavy objects on the unit. .......................................................................................................... 101c · .......................................................................................................... 012b · Immediately turn the power off, remove the AC adaptor from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the "Information" page when: · The AC adaptor, the power-supply cord, or the plug has been damaged; or · If smoke or unusual odor occurs · Objects have fallen into, or liquid has been spilled onto the unit; or · The unit has been exposed to rain (or otherwise has become wet); or · The unit does not appear to operate normally or exhibits a marked change in performance. In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit. Protect the unit from strong impact. (Do not drop it!) .......................................................................................................... 102c · .......................................................................................................... 103b · .......................................................................................................... 013 .......................................................................................................... 104 · · .......................................................................................................... 106 .......................................................................................................... 014 · · .......................................................................................................... 107c .......................................................................................................... 015 · · Do not force the unit's power-supply cord to share an outlet with an unreasonable number of other devices. Be especially careful when using extension cords--the total power used by all devices you have connected to the extension cord's outlet must never exceed the power rating (watts/amperes) for the extension cord. Excessive loads can cause the insulation on the cord to heat up and eventually melt through. Before using the unit in a foreign country, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the "Information" page. Always turn the unit off and unplug the AC adaptor before attempting installation of the circuit board (SRX series; p. 174, DIMM; p. 176). DO NOT play a CD-ROM disc on a conventional audio CD player. The resulting sound may be of a level that could cause permanent hearing loss. Damage to speakers or other system components may result. Never handle the AC adaptor or its plugs with wet hands when plugging into, or unplugging from, an outlet or this unit. Before moving the unit, disconnect the AC adaptor and all cords coming from external devices. .......................................................................................................... 108b · .......................................................................................................... 109b .......................................................................................................... 016 · Before cleaning the unit, turn off the power and unplug the AC adaptor from the outlet (p. 15). · .......................................................................................................... 110b · Whenever you suspect the possibility of lightning in your area, disconnect the AC adaptor from the outlet. .......................................................................................................... 022b .......................................................................................................... 115a · · .......................................................................................................... 023 Install only the specified circuit board(s) (SRX series, DIMM). Remove only the specified screws (p. 174, p. 176). Should you remove the ground terminal screw or screws that fasten the bottom cover or the PC card protector, keep them in a safe place out of children's reach, so there is no chance of them being swallowed accidentally. .......................................................................................................... 118a · · 3 IMPORTANT NOTES 291a In addition to the items listed under "USING THE UNIT SAFELY" on page 2­3, please read and observe the following: Power Supply 301 Repairs and Data 452 · Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on the way in which the electrical appliance is used, power supply noise may cause this unit to malfunction or may produce audible noise. If it is not practical to use a separate electrical outlet, connect a power supply noise filter between this unit and the electrical outlet. 302 · Please be aware that all data contained in the unit's memory may be lost when the unit is sent for repairs. Important data should always be backed up on a memory card, or written down on paper (when possible). During repairs, due care is taken to avoid the loss of data. However, in certain cases (such as when circuitry related to memory itself is out of order), we regret that it may not be possible to restore the data, and Roland assumes no liability concerning such loss of data. · The AC adaptor will begin to generate heat after long hours of consecutive use. This is normal, and is not a cause for concern. 307 Additional Precautions 551 · Before connecting this unit to other devices, turn off the power to all units. This will help prevent malfunctions and/or damage to speakers or other devices. Placement 351 · Please be aware that the contents of memory can be irretrievably lost as a result of a malfunction, or the improper operation of the unit. To protect yourself against the risk of loosing important data, we recommend that you periodically save a backup copy of important data you have stored in the unit's memory on a memory card. 552 · Using the unit near power amplifiers (or other equipment containing large power transformers) may induce hum. To alleviate the problem, change the orientation of this unit; or move it farther away from the source of interference. 352a · Unfortunately, it may be impossible to restore the contents of data that was stored on a memory card or unit's memory once it has been lost. Roland Corporation assumes no liability concerning such loss of data. 553 · This device may interfere with radio and television reception. Do not use this device in the vicinity of such receivers. 352b · Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off. 354a · Use a reasonable amount of care when using the unit's buttons, sliders, or other controls; and when using its jacks and connectors. Rough handling can lead to malfunctions. 554 · Never strike or apply strong pressure to the display. 556 · When connecting / disconnecting all cables, grasp the connector itself--never pull on the cable. This way you will avoid causing shorts, or damage to the cable's internal elements. 558a · Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit. 355b · To avoid disturbing your neighbors, try to keep the unit's volume at reasonable levels. You may prefer to use headphones, so you do not need to be concerned about those around you (especially when it is late at night). 559a · When moved from one location to another where the temperature and/or humidity is very different, water droplets (condensation) may form inside the unit. Damage or malfunction may result if you attempt to use the unit in this condition. Therefore, before using the unit, you must allow it to stand for several hours, until the condensation has completely evaporated. 358 · When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials. 561 · Use only the specified expression pedal (EV-5; sold separately). By connecting any other expression pedals, you risk causing malfunction and/or damage to the unit. 562 · Do not allow objects to remain on top of the keyboard. This can be the cause of malfunction, such as keys ceasing to produce sound. 360 · Depending on the material and temperature of the surface on which you place the unit, its rubber feet may discolor or mar the surface. You can place a piece of felt or cloth under the rubber feet to prevent this from happening. If you do so, please make sure that the unit will not slip or move accidentally. · Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions. · Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable. 566b Maintenance 401a · The sensitivity of the D Beam controller will change depending on the amount of light in the vicinity of the unit. If it does not function as you expect, adjust the sensitivity as appropriate for the brightness of your location. · For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth. 402 · Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation. 4 IMPORTANT NOTES Before Using Cards Using Memory Cards (p. 178) 704 220 * All product names mentioned in this document are trademarks or registered trademarks of their respective owners. 230 * SmartMedia is a trademark of Toshiba Corp. 234 · Carefully insert the memory card all the way in--until it is firmly in place. 705 · Never touch the terminals of the memory card. Also, avoid getting the terminals dirty. 707 * CompactFlash and are trademarks of SanDisk Corporation and licensed by CompactFlash association. 235 * Roland Corporation is an authorized licensee of the CompactFlashTM and CF logo ( ) trademarks. · This unit's PC card slot accepts CompactFlash memory cards. Microdrive storage media are not compatible. 708 · CompactFlash and SmartMedia (3.3 V) are constructed using precision components; handle the cards carefully, paying particular note to the following. · To prevent damage to the cards from static electricity, be sure to discharge any static electricity from your own body before handling the cards. · Do not touch or allow metal to come into contact with the contact portion of the cards. · Do not bend, drop, or subject cards to strong shock or vibration. · Do not keep cards in direct sunlight, in closed vehicles, or other such locations (storage temperature: -25 to 85° C). · Do not allow cards to become wet. · Do not disassemble or modify the cards. Handling CD-ROMs 801 · Avoid touching or scratching the shiny underside (encoded surface) of the disc. Damaged or dirty CD-ROM discs may not be read properly. Keep your discs clean using a commercially available CD cleaner. Copyright 851 · Unauthorized recording, distribution, sale, lending, public performance, broadcasting, or the like, in whole or in part, of a work (musical composition, video, broadcast, public performance, or the like) whose copyright is held by a third party is prohibited by law. 853 · Do not use this unit for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this unit. 5 Contents USING THE UNIT SAFELY......................................................................2 IMPORTANT NOTES ...............................................................................4 Main Features........................................................................................10 Panel Descriptions................................................................................11 Front Panel................................................................................................................................................. 11 Rear Panel .................................................................................................................................................. 13 Getting Ready........................................................................................14 Connections ............................................................................................................................................... 14 Turning On/Off the Power..................................................................................................................... 15 Adjusting the Display Contrast (LCD Contrast).................................................................................. 15 Listening to the Demo Songs .................................................................................................................. 15 Various Performance Features............................................................16 Overview of the JUNO-G ......................................................................17 How the JUNO-G Is Organized ............................................................................................................. 17 About Memory.......................................................................................................................................... 19 About the Onboard Effects ..................................................................................................................... 20 About the Song Recorder ........................................................................................................................ 21 About Audio Track Recording ............................................................................................................... 22 Basic Operation of the JUNO-G...........................................................23 Switching the Sound Generator Mode .................................................................................................. 23 About the Function Buttons.................................................................................................................... 23 Moving the Cursor ................................................................................................................................... 24 Changing a Value ..................................................................................................................................... 24 Assigning a Name .................................................................................................................................... 24 Playing in Patch Mode..........................................................................25 About the PATCH PLAY Screen............................................................................................................ 25 Selecting Patches in the Main Screen..................................................................................................... 26 Using the Category Group Buttons to Select Patches ......................................................................... 26 Selecting Patches from the List............................................................................................................... 27 Auditioning a Patch or Rhythm Set (Phrase Preview)........................................................................ 28 Transposing the Keyboard in Octave Units (Octave Shift) ................................................................ 28 Transposing the Keyboard in Semitone Steps (Transpose)................................................................ 29 Selecting the Tones That Will Sound (Tone On/Off).......................................................................... 29 Playing Percussion Instruments............................................................................................................. 29 Adjusting the Volume Balance between the Keyboard Performance and the Rhythm Pattern ... 29 Creating a Patch....................................................................................30 How to Make Patch Settings................................................................................................................... 30 Saving Patches You've Created (Write) ................................................................................................ 32 Functions of Patch Parameters ............................................................................................................... 34 Creating a Rhythm Set .........................................................................49 How to Make Rhythm Set Settings ........................................................................................................ 49 Saving Rhythm Sets You've Created (Write) ....................................................................................... 51 Functions of Rhythm Set Parameters .................................................................................................... 52 Playing in Performance Mode..............................................................58 Displaying PERFORM PLAY Screen..................................................................................................... 58 6 Displaying PART MIXER Screen ........................................................................................................... 58 Functions in the PERFORMANCE PLAY/MIXER Screen................................................................. 58 Selecting a Performance........................................................................................................................... 59 Using the PLAY Screen............................................................................................................................ 60 Combining and Playing Sounds Together (Layer).............................................................................. 60 Playing Different Sounds in Different Areas of the Keyboard (Split) .............................................. 61 Using the MIXER Screen ......................................................................................................................... 61 Creating a Performance .......................................................................63 Adjusting the Parameters of Each Part ................................................................................................. 63 Changing the Settings of the Patch Assigned to a Part....................................................................... 63 Saving a Performance You've Created (Write) .................................................................................... 63 Functions of Parameters of Each Part (Performance Parameters)..................................................... 64 MIDI Settings ............................................................................................................................................ 67 Settings for the D Beam and the Controller.......................................................................................... 68 Modifying the Sound in Real Time ......................................................69 D Beam Controller.................................................................................................................................... 69 Control Pedal ............................................................................................................................................ 72 Playing Arpeggios ................................................................................73 About Arpeggio ........................................................................................................................................ 73 Playing Arpeggios .................................................................................................................................... 73 Arpeggio Settings ..................................................................................................................................... 74 Creating an Arpeggio Style (Arpeggio Style Edit) .............................................................................. 75 Saving the Styles You Have Created (Write)........................................................................................ 76 Using the Chord Memory Function .....................................................77 About the Chord Memory Function...................................................................................................... 77 Performing with the Chord Memory Function.................................................................................... 77 Creating Your Own Chord Forms ......................................................................................................... 78 Saving the Chord Forms You Have Created (Write) .......................................................................... 78 Playing Rhythms...................................................................................79 About Rhythm Patterns........................................................................................................................... 79 Using Rhythm Groups............................................................................................................................. 79 Playing Rhythm ........................................................................................................................................ 79 Rhythm Pattern Settings.......................................................................................................................... 80 Creating a Rhythm Pattern (Rhythm Pattern Edit) ............................................................................. 81 Saving the Rhythm Pattern You Have Created (Write)...................................................................... 81 Creating a Rhythm Group (Rhythm Group Edit)................................................................................ 82 Saving the Rhythm Group You Have Created (Write) ....................................................................... 82 Creating a List of Frequently Used Patches, Performances, or Songs (Live Setting) .........................................................................................83 Recalling Sounds ...................................................................................................................................... 83 Registering a Sound ................................................................................................................................. 83 Registering a Song .................................................................................................................................... 83 Removing a Registration ......................................................................................................................... 83 Removing all Registrations from a Bank............................................................................................... 83 Playing Back a Song.............................................................................84 Loading and Playing a Song (Load Play).............................................................................................. 84 Playing MIDI Tracks Immediately (Quick Play) ................................................................................. 84 Various Playback Methods ..................................................................................................................... 85 Recording a Song (MIDI Track)............................................................87 Before You Record a New MIDI Track.................................................................................................. 87 Recording Your Performance as You Play It (Realtime Recording) ................................................. 88 Inputting Data One Step at a Time (Step Recording).......................................................................... 92 7 Editing a Song (MIDI Track) .................................................................94 Loading the Song You Want to Edit ...................................................................................................... 94 Editing Sequencer Data Over the Specified Range (Track Edit) ....................................................... 97 Editing Individual Items of Sequencer Data (Micro Edit).................................................................. 99 Assigning a Name to a Song (Song Name)......................................................................................... 103 Recording a Song (Audio Track) .......................................................104 Before You Record Audio via the AUDIO INPUT Jacks .................................................................. 104 Recording an Audio Track (SOLO/RE-SAMPLING) ....................................................................... 105 Combining Multiple Audio Tracks into One Track (AUDIO MERGE) ......................................... 106 Editing a Song (Audio Track).............................................................108 Items in the AUDIO TRACK Screen.................................................................................................... 108 Editing Audio Tracks (AUDIO TRACK Screen)................................................................................ 108 Items in the AUDIO MIXER Screen..................................................................................................... 111 Controlling the Audio Tracks (AUDIO MIXER screen) ................................................................... 111 Saving/Loading a Song (Save/Load).................................................113 Saving a Song (Save) .............................................................................................................................. 113 Saving a Song as an SMF File (Save as SMF)...................................................................................... 114 Loading a Song (Load)........................................................................................................................... 115 Editing a Audio Phrase (Sample) ......................................................117 Sample List .............................................................................................................................................. 117 Sample Edit ............................................................................................................................................. 119 Saving a Sample (Write) ........................................................................................................................ 124 Adding Effects.....................................................................................125 Turning Effects On and Off................................................................................................................... 125 Making Effect Settings ........................................................................................................................... 125 Applying Effects in Patch Mode .......................................................................................................... 126 Applying Effects in Performance Mode.............................................................................................. 127 Making Multi-Effects Settings (MFX1­3) ............................................................................................ 129 Making Multi-Effects Settings (MFX Control) ................................................................................... 129 Specifying the Multi-Effects Structure (MFX Structure)................................................................... 130 Multi-Effects Parameters ....................................................................................................................... 131 Making Chorus Settings ........................................................................................................................ 154 Making Reverb Settings......................................................................................................................... 155 Mastering Effect...................................................................................................................................... 156 Settings Common to All Modes (System Function) ........................157 How to Make System Function Settings ............................................................................................. 157 Saving the System Settings (System Write) ........................................................................................ 157 System Information ................................................................................................................................ 157 Functions of System Parameters .......................................................................................................... 158 Data Management Functions/ Reset to Factory Settings (Factory Reset) .......................................164 Backing Up User Data (User Backup) ................................................................................................. 164 Restoring User Data that You Backed Up (User Restore) ................................................................ 164 Factory Reset ........................................................................................................................................... 164 Initializing a Memory Card (Card Format) ........................................................................................ 164 File-Related Functions (File Utility)...................................................165 Basic Procedure....................................................................................................................................... 165 Copying a File (Copy)............................................................................................................................ 166 Deleting a File (Delete) .......................................................................................................................... 166 Moving a File (Move)............................................................................................................................. 166 Initializing a Memory Card (Card Format) ........................................................................................ 166 8 Connecting to Your Computer via USB ............................................167 About USB Functions............................................................................................................................. 167 Selecting the USB Operating Mode ..................................................................................................... 167 Transferring Files to or from Your Computer (Storage Mode) ....................................................... 167 Exchanging MIDI Messages with Your Computer (MIDI Mode)................................................... 169 Using JUNO-G Editor/Librarian .........................................................170 Installing JUNO-G Editor/Librarian into Your Computer .............................................................. 170 Making Connections .............................................................................................................................. 170 About PC Mode ...................................................................................................................................... 170 JUNO-G Editor/Librarian System Requirements ............................................................................. 170 About V-LINK.......................................................................................172 What is V-LINK? .................................................................................................................................... 172 Connection Example .............................................................................................................................. 172 Turning the V-LINK ON/OFF ............................................................................................................. 172 V-LINK Settings (V-LINK SETUP) ...................................................................................................... 173 Installing the Wave Expansion Board...............................................174 Cautions When Installing a Wave Expansion Board ........................................................................ 174 How to Install a Wave Expansion Board ............................................................................................ 174 Checking the Installed Wave Expansion Board................................................................................. 175 Expanding the Memory ......................................................................176 Precautions for Expanding Memory ................................................................................................... 176 How to Expand the Memory ................................................................................................................ 176 Checking that memory is installed correctly...................................................................................... 177 Using a Memory Card .........................................................................178 Before Using the Memory Card ........................................................................................................... 178 Writing data to the card......................................................................................................................... 178 Installing the PC Card Protector .......................................................................................................... 178 Troubleshooting..................................................................................179 Error Messages ...................................................................................186 Performance List.................................................................................187 Patch List.............................................................................................188 Rhythm Set List...................................................................................193 Waveform List .....................................................................................202 Arpeggio Style List .............................................................................205 Rhythm Group List .............................................................................206 Rhythm Pattern List............................................................................207 About MIDI ...........................................................................................209 MIDI Implementation...........................................................................210 MIDI Implementation Chart ................................................................241 Specifications......................................................................................243 Index.....................................................................................................244 9 Main Features The JUNO-G is a high-quality synthesizer with professional sounds and playability. It features the latest sound generator, a variety of effects, and a song recorder with audio tracks, all combined into an easy-to-use instrument. The features listed below make the JUNO-G a great choice for any style of music, in applications ranging from stage performance to composition and arranging. Versatile sound control functionality In addition to a D Beam controller, the JUNO-G provides a wide range of controllers, such as the sound modify knobs and a hold pedal jack that can detect half-damper operations. The JUNO-G gives you complete control over your on-stage sound. The latest sound engine with 128voice polyphony The JUNO-G provides 128 voices of polyphony--the standard for the new era. You can layer complex sounds and enjoy multitrack recording using the song recorder. Plenty of external interfacing The rear panel USB connector supports both file transfer and USBMIDI, and can be switched as desired. There's also a PC card slot that can accommodate SmartMedia or CompactFlash via a commercially available adaptor. You can use a card to store as much as 1 GB of data (when using CompactFlash). Support for wave expansion boards To supplement the numerous patches that use the carefully selected high quality waves built into the JUNO-G, you can install one wave expansion board to add more waveform data. Depending on your needs and your favorite musical styles, you can choose one board from the wide variety of professionally acclaimed Roland SRX series boards now available. JUNO-G Editor/Librarian is included Dedicated editor/librarian software is included, letting you edit and manage JUNO-G sounds from the large screen of your computer. V-LINK functionality V-LINK allows you to synchronize music and video, opening up completely new performance possibilities. If you use the JUNO-G in conjunction with a V-LINK compatible video device (such as the Edirol motion dive .tokyo Performance Package, DV-7PR, PR-50, or V-4), you'll be able to control the images using the same operations as when playing music on the JUNO-G. Song recorder with audio tracks The built-in song recorder provides four dedicated audio tracks (stereo) in addition to the MIDI tracks (16 parts). This lets you create songs that contain audio acquired from a performing vocalist or guitarist in combination with the music produced by the internal sound generator. The MIDI track section provides a high-resolution 16-part (MIDI) sequencer that's designed with features like loop recording so that you can record non-stop without interrupting your musical imagination. The audio track section contains 4 MB of memory as standard (corresponding to approximately 23.5 seconds of stereo recording). You can add DIMM memory (up to 512 MB) to expand the recording capacity to a maximum of 51 minutes (stereo). In addition to audio phrases you record on the JUNO-G, you can also import audio files (in WAV or AIFF format) from your PC and use them as audio track phrases. General MIDI/GM2 compatibility The JUNO-G is compatible with General MIDI/GM2, and is able to play back music data that complies with the General MIDI/GM2 standard (General MIDI scores). Live Setting function The Live Setting function allows you to memorize settings and recall them as your live set progresses, guaranteeing that your performance will go smoothly. Sample Patch function This function lets you recall audio phrases from the audio tracks and play them on the keyboard just like patches or rhythm sets. Powerful effects including mastering functionality The JUNO-G provides three multi-effects processors (78 types), plus independent chorus and reverb processors. There's a mastering effect, indispensable for adding the final touch to your production, bringing your sound CD-master level impact and audio quality. 10 Panel Descriptions Front Panel fig.Front 1 2 3 4 5 6 7 8 9 10 1 or lower the keyboard range in steps of a semitone (p. 29). D BEAM Switches D Beam function on/off. You can apply a variety of effects to sounds simply by moving your hand (p. 69). OCTAVE [UP] [DOWN] Transposes the pitch of the keyboard in 1 octave units (p. 28). [SOLO SYNTH] Play the JUNO-G as a monophonic synthesizer (p. 70). 4 EDIT [ACTIVE EXPRESS] Play the JUNO-G as a active expression (p. 71). [PATCH] Make patch-related settings (p. 30). [ASSIGNABLE] You can assign a variety of parameters and functions to D Beam to modify the sound in realtime (p. 71). * Hold down [SHIFT] and press one of the corresponding buttons to access the D BEAM setting screen. [EFFECTS] Make effect-related settings (p. 125). [MENU] Opens the MENU. The contents of the menu will depend on the current mode. 2 VOLUME Knob Adjusts the overall volume that is output from the rear panel OUTPUT A (MIX) jacks and PHONES jack (p. 15). [SONG] Press this button to edit the entire song or to edit MIDI tracks. Also, this button is pressed to toggle between the Song Edit screen and the Song List screen (p. 84, p. 87, p. 94). [AUDIO] This button accesses the Sample Edit screen. Also, this button is pressed to toggle between the Sample Edit screen and the Sample List screen (p. 117). [V-LINK] Switches the V-LINK function on/off (p. 172). Press this button to access the V-LINK setting screen. [WRITE] Save edited settings into internal memory or a memory card (p. 32, p. 51, p. 63, p. 76, p. 78, p. 124). 3 MODE [PATCH] Enter Patch mode (p. 25). 5 [ARPEGGIO] Switches the ARPEGGIO on/off. The arpeggio setting screen will appear when you turn this on (p. 73). [PERFORM] View the Performance mode's Play screen (p. 58). [LIVE SETTING] View the LIVE SETTING screen (p. 83). [CHORD MEMORY] Switches the CHORD MEMORY on/off. The chord memory setting screen will appear when you turn this on (p. 77). [USB] Accesses the USB function select screen (p. 167). [PART MIXER] View the Performance mode's Mixer screen (p. 58). 6 Display This displays information regarding the operation you are performing. [AUDITION] Hold down this button to audition the currently selected sound (p. 28). [TRANSPOSE] By holding down [TRANSPOSE] and pressing [+] [-], you can raise 11 Panel Descriptions [RHYTHM PATTERN] This button accesses the Rhythm Pattern playback screen (p. 79). [STOP] Controls song recorder stop. [PART SELECT/TONE SW/SEL] When you press this button so it's lit, the category group buttons will operate as part select, tone switch, or tone select buttons. [PLAY] Controls song recorder play. * While stopped, you can hold down [SHIFT] and Press [PLAY] to perform MIDI Update (p. 86). [RHYTHM]­[BASS] These are the category group buttons (only in Patch mode). [REC] The display changes to the Recording Standby window (p. 88, p. 92, p. 105). If you press this button while recording a MIDI track, the Rehearsal function will be activated (p. 92). Function Buttons ([F1 (KBD/ORG)]­[F6 (VOCAL/PAD)]) The row of six buttons below the display are used to carry out various functions during editing and other tasks. The functions of these buttons will depend on the screen that you've selected (p. 23). 9 SOUND MODIFY 7 VALUE Dial This is used to modify values. If you hold down [SHIFT] as you turn the VALUE dial, the value will change in greater increments (p. 24). Turn these knobs to adjust the sound in real time or to edit parameter values. Pressing the button located at the left of knobs 1­4 will change the illumination status of the indicators located above the button, and will change the function of knobs 1­4 (p. 30). * In the performance mode, this button doesn't function. [DEC], [INC] This is used to modify values. If you keep on holding down one button while pressing the other, the value change accelerates. If you press one of these buttons while holding down [SHIFT], the value will change in bigger increments (p. 24). The CUTOFF knob and RESONANCE knob are dedicated to controlling Cutoff Frequency and Resonance (p. 30). 10 Pitch Bend/Modulation Lever This allows you to control pitch bend or apply vibrato (p. 16). [ ], [ ], [ ], [ ] Moves the cursor location up/down/left/right (p. 24). [SHIFT] This button is used in conjunction with other buttons to execute various functions. [EXIT] Return to the previous screen, or close the currently open window. In some screens, this causes the currently executing function to be aborted. [ENTER] Use this button to execute an operation. 8 SONG RECORDER [AUDIO TRACK] This button accesses the Audio Track screen (p. 104, p. 108). [TEMPO] Sets the tempo (BPM) (p. 73, p. 79, p. 85, p. 88). [LOOP] Turns Loop Play on/off. The loop setting screen will appear when you turn this on (p. 86, p. 95). AUDIO IN Slider This adjusts the AUDIO INPUT level. If you hold down [SHIFT] while operating this slider, the Input Setting screen will appear (p. 104). TRACK A1­A4 Sliders These sliders adjust the volume of each audio track (stereo). [BWD], [FWD] Moves the song position to the first beat of the previous or next measure (p. 85). * While playback is stopped, you can hold down [STOP] and press [BWD] to return the song position to the beginning of the song. If you press this during playback, you will return to the beginning of the song and stop. 12 Panel Descriptions Rear Panel fig.Rear 1 2 3 4 5 1 LCD CONTRAST Knob This knob adjusts the contrast of the top panel display. AUDIO INPUT Jacks (L (MONO)/MIC, R) Accept input of audio signals in stereo (L/R) from external devices. If you want to use mono input, connect to the L jack. When recording from a mic, connect it to the L jack 926a USB Connector This connector lets you use a USB cable to connect your computer to the JUNO-G (p. 167, p. 170). * When connection cables with resistors are used, the volume level of equipment connected to the AUDIO INPUT jacks may be low. If this happens, use connection cables that do not contain resistors, such as those from the Roland PCS series. 2 PC CARD Slot A memory card can be inserted here (p. 178). 930 OUTPUT A (MIX) Jacks (L (MONO)/1, R/2) These jacks output the audio signal to the connected mixer/amplifier system in stereo. For mono output, use the L jack (p. 14). * You can also use these to output each part independently. * 931 Never insert or remove a memory card while this unit's power is on. Doing so may corrupt the unit's data or the data on the memory card. Carefully insert the memory card all the way in--until it is firmly in place. OUTPUT B Jacks (L/3, R/4) These jacks output the audio signal to the connected mixer/amplifier system in stereo. * You can also use these to output each part independently. * PHONES Jack 3 MIDI Connectors (OUT, IN) These connectors can be connected to other MIDI devices to receive and transmit MIDI messages. This is the jack for connecting headphones (sold separately) (p. 14). 5 Cord Hook Anchor the cord of the AC adaptor (p. 14). CONTROL PEDAL Jack You can connect optional expression pedals (EV-5, etc.) to these jacks. By assigning a desired function to a pedal, you can use it to select or modify sound or perform various other control. You can also connect optional pedal switches (DP series etc.) to sustain sound (p. 16). 925 DC IN Jack Connect the AC adaptor here (p. 14). Be sure to use only the supplied AC adaptor. POWER ON Switch Press to turn the power on/off (p. 15). * Use only the specified expression pedal (EV-5; sold separately). By connecting any other expression pedals, you risk causing malfunction and/or damage to the unit. Ground Terminal 927 HOLD PEDAL Jack An optional pedal switch (DP series etc.) can be connected to this jack for use as a hold pedal (p. 16). This can also be set so it supports the use of half-pedaling techniques. So, after connecting an optional expression pedal (DP-8/ 10), you can employ pedal work to achieve even finer control in performances in which piano tones are used. 4 AUDIO INPUT LEVEL Knob This knob adjusts the volume of the input to the AUDIO INPUT. Use this knob to make adjustments if the sound is still distorted even after you lower the top panel AUDIO IN slider, or conversely if the volume is insufficient even after setting the slider to the maximum position (p. 104). Depending on the circumstances of a particular setup, you may experience a discomforting sensation, or perceive that the surface feels gritty to the touch when you touch this device, microphones connected to it, or the metal portions of other objects, such as guitars. This is due to an infinitesimal electrical charge, which is absolutely harmless. However, if you are concerned about this, connect the ground terminal (see figure) with an external ground. When the unit is grounded, a slight hum may occur, depending on the particulars of your installation. If you are unsure of the connection method, contact the nearest Roland Service Center, or an authorized Roland distributor, as listed on the "Information" page. Unsuitable places for connection · Water pipes (may result in shock or electrocution) · Gas pipes (may result in fire or explosion) · Telephone-line ground or lightning rod (may be dangerous in the event of lightning) 13 Getting Ready Connections Since JUNO-G contains no amplifier or speakers, you'll need to connect it to audio equipment such as a keyboard amplifier, monitor speaker system or home stereo, or use headphones to hear its sound. In order to fully experience the JUNO-G's sound, we recommend using a stereo amp/speaker system. If you're using a mono system, however, make your connections to the JUNO-G's OUTPUT A (MIX) jack L (MONO). * 921 Audio cables are not included with the JUNO-G. You'll need to provide them. To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. fig.Connect.e to the Power Outlet AC adaptor Stereo headphones Mixer etc. Monitor speakers (powered) Power amp 924 To prevent the inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and to avoid applying undue stress to the AC adaptor jack, anchor the power cord using the cord hook, as shown in the illustration. 14 Getting Ready Turning On/Off the Power 941 * Once the connections have been completed (p. 14), turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. Adjusting the Display Contrast (LCD Contrast) The characters in the display may be difficult to view immediately after turning on the JUNO-G's power or after extended use. If this occurs, turn the rear panel LCD CONTRAST knob to make the display legible. 1. Before turning on the JUNO-G's power, consider these two questions: · Are all devices connected properly? · Have the volume controls of the JUNO-G and all connected audio devices been turned to their lowest settings? Listening to the Demo Songs The internal demo songs will feature the JUNO-G's exceptional sounds and effects. 2. Turn on the POWER ON switch located on the rear panel of the JUNO-G. 942 1. Press EDIT [MENU] to open the Top Menu Window. fig.TopMenu * *