02897712 © 1*KGS 2 3 · · · · 4 · · 1. 2. 3. 4. 5. 6. 7. 8. 5 Owner's Manual Thank you and congratulations on your choice of the Roland V-Practice Pad RP-2. Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" (p. 2) and "IMPORTANT NOTES" (p. 3). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Be sure to adjust the head tension before using the RP-2. Striking the pad while the head is loosened may damage the sensor and head. 02897712 1*KGS 202 Copyright © 2002 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. USING THE UNIT SAFELY Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. * Material damage refers other adverse effects respect to the home furnishings, as well animals or pets. to damage or caused with and all its to domestic The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled. The q symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet. 001 · Before using this unit, make sure to read the instructions below, and the Owner's Manual. Do not open or perform any internal modifications on the unit. 006 · ................................................................................................ 002a · ................................................................................................ 003 When using the unit with the stand recommended by Roland (PDS-2), the PDS-2 must be carefully placed so it is level and sure to remain stable. If not using a stand, you still need to make sure that any location you choose for placing the unit provides a level surface that will properly support the unit, and keep it from wobbling. Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the unit. · Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the "Information" page. ................................................................................................ 011 · ................................................................................................ 013 ................................................................................................ 004 · · Never use or store the unit in places that are: · Subject to temperature extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are · Damp (e.g., baths, washrooms, on wet floors); or are · Humid; or are · Exposed to rain; or are · Dusty; or are · Subject to high levels of vibration. ................................................................................................ 005 In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit. Protect the unit from strong impact. (Do not drop it!) ................................................................................................ 014 · 104 · Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children. Never climb on top of, nor place heavy objects on the unit. Should you remove tuning bolts and washers, make sure to put them in a safe place out of children's reach, so there is no chance of them being swallowed accidentally. ................................................................................................ 106 · This unit should be used only with the stand that is recommended by Roland (PDS-2). · ................................................................................................ ................................................................................................ 118 · ................................................................................................ 2 IMPORTANT NOTES In addition to the items listed under "USING THE UNIT SAFELY" on page 2, please read and observe the following: 291a Placement 354a 562 · Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit. 355 · Use the supplied cable or a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions. · Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable. 921 · To avoid possible breakdown, do not use the unit in a wet area, such as an area exposed to rain or other moisture. Maintenance 401a · For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth. 402 · To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. add1 · Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation. Additional Precautions 553 · The hoop's rubber portion is an expendable item, whose performance deteriorates with extended use. Continued use of this rubber component beyond its useful service life may result in malfunction or damage to the hoop. If this occurs, replace the hoop and insert. For more on replacing the hoop rubber, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the "Information" page. add2 · Use a reasonable amount of care when using its output jack. Rough handling can lead to malfunctions. 556 · Do not apply excessive force to the sensor located below the center of the head. Doing so can interfere with accurate detection, and may damage it. add3 · When connecting / disconnecting all cables, grasp the connector itself--never pull on the cable. This way you will avoid causing shorts, or damage to the cable's internal elements. 558d · Due to the nature of the materials used in the sensor, changes in room temperature may affect the sensitivity of the sensor. add3 · This instrument is designed to minimize the extraneous sounds produced when it's played. However, since sound vibrations can be transmitted through floors and walls to a greater degree than expected, take care not to allow these sounds to become a nuisance to neighbors, especially when performing at night and when using headphones. 559a · Be sure to adjust the head tension before using the RP-2. Striking the pad while the head is loosened may damage the sensor and head. · When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials. 3 Features · Uses the same type of mesh head as used with Roland's V-Drums Series. Superior feel and quiet striking make it an excellent choice for practice. · The head can be adjusted to the desired tension. · When used in combination with the RM-2 (optional), you can practice while listening to the metronome sound, and enjoy use of the realistic, onboard sounds in performing anything from the slightest nuances to the most dynamic solos. · A special practice stand (the optional PDS-2) is also available, which allows you to play the pad either sitting or standing, since the height and angle is readily adjustable. RM-2 (Option) RP-2 PDS-2 (Option) Contents of the Package V-PRACTICE PAD (pad unit) Owner's manual (this manual) Connection cable (1 m or 39-3/8 inches) Tuning key Names of Components fig.01-01.e Head Output Jack Washer Frame Tuning Bolt Security Slot Rubber Feet Hoop (Rim) Mount the RM-2 here. 988 Sensor Stand Fixing Nut (M8) Security Slot ( ) http://www.kensington.com/ 4 Adjusting/Replacing the Head Adjusting the Head Tension When adjusting, use the included tuning key. * Striking the pad while the head is loose may damage the sensor. Furthermore, if you use the pad without it being properly adjusted, you could likely experience problems such as the following. · Sometimes it does not sound (uneven volume). · The volume is too low (reduced sensitivity). fig.01-03 The proper tension is achieved when the feel and response of the head as you strike the pad is about the same as that of an acoustic drum. While continuing to check the feel and response, use the tuning key to adjust all eight tuning bolts until the tension is properly adjusted. Always tighten the tuning bolts in the order shown in the figure. Do not tighten any one tuning bolt too firmly all at once. Doing so prevents uniform stretching throughout the head, which is one cause of malfunction. Replacing the Head The head is an expendable item, whose performance deteriorates with extended use. If the head has torn out or remains slack even after proper adjustment, then replace the head. Head tension may change with extended use of the pad. Make adjustments as needed. Replacement heads (optional) MH-8 Mesh Head Replacing the Head When replacing, use the included tuning key. 1. Remove all tuning bolts and washers. Go around and gradually loosen each one in order (by turning it counterclockwise). 2. Remove the hoop. 3. Remove the old head. 4. Place the new head on the frame. 5. Place the hoop onto the head. 6. Pass the tuning bolts through the washers, then attach them to the hoop and frame. 7. Tighten all eight tuning bolts until they lightly contact the hoop. 8. Next, adjust the tension of the head. Refer to "Adjusting the Head Tension." On the V-PRACTICE PAD (RP-2), adjusting the head tension affects only the head response, and does not change the pitch of the sound, as it would on an acoustic drum. Be careful not to lose the tuning bolts and washers that you removed. Specifications Pad size: 8 inches Trigger: 1 (Head) Dimensions 264 (W) x 297 (D) x 60 (H) mm 10-7/16(W) x 11-3/4 (D) x 2-3/8(H) inches Weight: 890 g or 2 lbs Stand screw size: M8 962a Accessories Owner's manual, Connection cable (1 m or 39-3/8 inches), Tuning key Options RHYTHM COACH (RM-2) Pad Stand (PDS-2) Mesh Head (MH-8) * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. 5 When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. Information AFRICA EGYPT Al Fanny Trading Office P.O. Box 2904, El Horrieh Heliopolos, Cairo, EGYPT TEL: (02) 4185531 SINGAPORE Swee Lee Company 150 Sims Drive, SINGAPORE 387381 TEL: 846-3676 PANAMA SUPRO MUNDIAL, S.A. Boulevard Andrews, Albrook, Panama City, REP. DE PANAMA TEL: (507) 315-0101 ITALY Roland Italy S. p. A. Viale delle Industrie 8, 20020 Arese, Milano, ITALY TEL: (02) 937-78300 ISRAEL Halilit P. Greenspoon & Sons Ltd. 8 Retzif Ha'aliya Hashnya St. Tel-Aviv-Yafo ISRAEL TEL: (03) 6823666 CRISTOFORI MUSIC PTE LTD Blk 3014, Bedok Industrial Park E, #02-2148, SINGAPORE 489980 TEL: 243 9555 PARAGUAY Distribuidora De Instrumentos Musicales J.E. Olear y ESQ. Manduvira Edeficio, El Dorado Planta Baja Asuncion PARAGUAY TEL: 595-21-492147 NORWAY Roland Scandinavia Avd. Kontor Nor ...