Restoring the original settings (Factory Reset) When you carry out a Factory Reset, the user patches, phrases, and arpeggio settings you've created will disappear. 1. While together holding down both the PRESET and USER buttons, switch on the SH-201. 2. Press the blinking WRITE button. If you decide to cancel, press the CANCEL button. 1. 2. Patch list PRESET A-1 A-2 A-3 A-4 A-5 A-6 A-7 A-8 B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 C-1 C-2 C-3 C-4 C-5 C-6 C-7 C-8 D-1 D-2 D-3 D-4 D-5 D-6 D-7 D-8 Name Reso Bass Fat Saw Lead SilkyStrings RingModBell OSC SyncLead SuperSawBrs Electro Seq Logic Noize Fat Bass 201 Lead SlowSoft Pad SuperSawKey FB OSC Lead Poly Synth Sweep Arp S&H FX 1 Deep Bass Soft Lead BriteStrings SH-201 EP Sweep Up Trancy 201 Sliced Pd/Bs NoiseWhistle SH Bass 101 JP 5th Lead JP-8 SoftPAD JP-8 Clav JP-8SweepPad JUNO Brass S&H FX 2 INIT PATCH Bank Select MSB LSB Program Change 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 USER A-1 A-2 A-3 A-4 A-5 A-6 A-7 A-8 B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 C-1 C-2 C-3 C-4 C-5 C-6 C-7 C-8 D-1 D-2 D-3 D-4 D-5 D-6 D-7 D-8 Name TB Dist Lead SoftSaw Lead StackStrings RingBellStk SBF FeedBack Stack Brass Trance Seq FormantMover Brite Bass OnlyTimeLead SquPadSplit OD Glass Pad Club Split modest PolyChordArp mod-e-rate Angry Bass Simple SquLd Alaska Pad Soft Keys 5th Pad ProfessorKey Trance Keys AsteroidBelt d&b Bass Cheesy Lead Retro Str Distant Ring FB Ring Lead Stack Saws Mayhem Gamelan Bell Bank Select MSB LSB Program Change 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 87 64 87 0 87 64 87 0 87 64 87 0 87 64 87 0 Effect template list DELAY 1 2 3 4 Name Simple Delay 1 Shot Delay Medium Delay Long Delay DELAY 5 6 7 8 Name Analog Delay Mod Delay Chorus 1 Chorus 2 REVERB 1 2 3 4 Name Room 1 Room 2 Studio 1 Studio 2 REVERB 5 6 7 8 Name Hall 1 Hall 2 Plate 1 Plate 2 For details on selecting an effect template, refer to p. 45 of the SH-201 owner's manual. SH-201 LEAFLET Notice of changed specifications Effect Due to a change in the specifications of this product, it operates differently than described in the owner's manual. Please accept our apologies, and make the following correction to the manual. INTERVAL buttons (p. 30) Change: -5 button 5th button template list When you press the 5th button, the pitch of OSC 2 is raised 7 semitones (a perfect fifth) above OSC 1. * Parameters other than PITCH will not be changed. * The INTERVAL button will not light. Selecting a tone when using DUAL/SPLIT (p. 46, 47) If you press the UPPER button or LOWER button while using Dual or Split, the indicator of the button you pressed will blink, and the indicator of the other button will light. Now when you operate the panel buttons or knobs, your changes will affect the tone whose indicator is blinking. Functionality added to the recorder Now you can choose the type of data that will be recorded (p. 24) or erased (p. 25). From the REC standby state or while recording a phrase, press a BANK button (A­D). All of the following (B, C, D) listed below (Default state) · B (Bender): Pitch bender lever operations only · C (Controller): Knob operations (only parameters in the table on p. 72) · D (notes): Keyboard's performance data only · A (All): · · · · Other notes · Don't set the CLOCK SOURCE parameter (p. 68) to "MIDI" or "USB" unless you're synchronizing the SH201 to MIDI clock received from an external device. With these settings, the arpeggiator, recorder, and tempo-synchronized LFO will not operate correctly. · If, while recording (p. 24), you specify the length of the phrase to be recorded, all performance data previously recorded for that phrase will be erased. · If you want to control Active Expression (p. 20) from the D Beam controller, turn the ACTIVE EXPRESSION parameter (p. 65) "ON." (Hold down the CANCEL button and press the EXPRESS button.) · · · Copyright © 2006 ROLAND CORPORATION No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. © 40674656 2MP 2 ...