GotchaClipTM for Pegboard Parts Instruction Sheet Gotcha 12G100 GotchaClips for Pegboard Instructions for Hanging Step 1 Place poster on a flat surface. Snap the Gotcha Holder open and insert poster (top and bottom). To close, snap the Gotcha Holder shut. Fig. 1 Note: It is easier to open and close the Gotcha Holder by starting at one end and working your way down the holder. Figure 1 Step 2 Insert the GotchaClips into the holes in the pegboard. For best results, place the GotchaClips in holes separated by a difference equal to half of the length of Gotcha Holder. ( i.e. If holder is 12" place clips 6" apart). Fig. 2 Step 3 Push Gotcha onto clips, you will hear a "SNAP". Fig. 3 Figure 2 Important note: Please save and reuse the Gotcha Holder and GotchaClips for future projects. Figure 3 The Gotcha® is a registered trademark and GotchaClip is a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #00INSGotchaClip/Pegboard Incept-10.5.00 35 Congress Street, Salem, MA 01970 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays.com GotchaClipTM for Pegboard Parts Instruction Sheet Gotcha 12G100 GotchaClips for Pegboard Instructions for Hanging Step 1 Place poster on a flat surface. Snap the Gotcha Holder open and insert poster (top and bottom). To close, snap the Gotcha Holder shut. Fig. 1 Note: It is easier to open and close the Gotcha by starting at one end and working your way down the holder. Figure 1 Step 2 Insert the GotchaClips into the holes in the pegboard. For best results, place the GotchaClips in holes separated by a difference equal to half of the length of Gotcha Holder. ( i.e. If holder is 12" place clips 6" apart). Fig. 2 Step 3 Push Gotcha onto clips, you will hear a "SNAP". Fig. 3 Figure 2 Important note: Please save and reuse the Gotcha Holder and GotchaClips for future projects. Figure 3 The Gotcha is a registered trademark and GotchaChips are a trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #00INSGotchaClip/Pegboard Incept-10.5.00 ...