Detailed instructions for use are in the User's Guide.
Gotcha®
Parts
Instruction Sheet
Gotcha 12G100
Gotcha Clip 12G100
V Clip 12G100
Jet Wire 12G100
Instructions for Hanging
Step 1
Place poster on a flat surface. Snap the Gotcha open and insert poster (top and bottom). To close, snap the Gotcha shut. Fig. 1 Note: It is easier to open and close the Gotcha by starting at one end, and working your way down the holder.
Step 2
Insert Gotcha Clips into slot on backside of the top Gotcha only. (You should hear a "SNAP" when the clips are inserted properly). Fig. 2 Note: For best results, place the clips 1/3 of the way in from each end on the top Gotcha holder.
Figure 1
Step 3
Attach V Clip to ceiling grid.
Step 4
Attach one end of Jet wire to V Clips and the other into the Gotcha clips. Fig. 2 & 3 Slowly pull sign down to desired level. Jet Wire stretches to 48".
Figure 2
Figure 3 Important note:
Please save and reuse the Gotcha Holder, V Clips and Gotcha clips for future projects.
The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #99INSGOVCLP
21 Lime Street, Marblehead, MA 01945 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays.com
Incept-3.1.99
Gotcha®
Parts
Instruction Sheet
Gotcha 12G100
Gotcha Clip 12G100
V Clip 12G100
Jet Wire 12G100
Instructions for Hanging
Step 1
Place poster on a flat surface. Snap the Gotcha open and insert poster (top and bottom). To close, snap the Gotcha shut. Fig. 1 Note: It is easier to open and close the Gotcha by starting at one end, and working your way down the holder.
Step 2
Insert Gotcha Clips into slot on backside of the top Gotcha only. (You should hear a "SNAP" when the clips are inserted properly). Fig. 2 Note: For best results, place the clips 1/3 of the way in from each end on the top Gotcha holder.
Figure 1
Step 3
Attach V Clip to ceiling grid.
Step 4
Attach one end of Jet wire to V Clips and the other into the Gotcha clips. Fig. 2 & 3 Slowly pull sign down to desired level. Jet Wire stretches to 48".
Figure 2
Figure 3 Important note:
Please save and reuse the Gotcha Holder, V Clips and Gotcha clips for future projects.
The Gotcha® is a registered trademark of Rose Displays, Ltd. Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage resulting from the use of these products. Part #99INSGOVCLP
21 Lime Street, Marblehead, MA 01945 Tel# 1- 800 631-9707 Fax# 1-800-560-2890 e-mail:signware@rosedisplays.com
Incept-3.1.99
...