Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 1 TABLE OF CONTENTS 1. 1.1. 1.2. 2. 2.1. 2.2. 2.3. 2.4. 2.5. 3. Precautions Safety Maintenance Set Up Fitting and connecting the speakers (AXIUM HD-D45 only) Aerial connection Mains connection Switching on your SAGEM AXIUMTM Home Cinema Screen Switching off your SAGEM AXIUMTM Home Cinema Screen First Rapid Installation 2 2 3 4 4 4 4 4 5 5 1. 1.1. Safety Precautions Respect all maintenance advice, safety precautions and instructions recommended in this user manual booklet are for your safety and to prolong the working life of the equipment. · Definitions Warning about the risk of electric shocks. 6. 6.1. 6.2. 6.3. 6.4. 6.5. 6.6. 6.7. 6.8. 6.9. 6.10. 7. 7.1. 7.2. 7.3. 8. 8.1. 8.2. 8.3. 8.4. 8.5. 8.6. 8.7. 8.8. 8.9. 9. 10. 10.1. 10.2. 11. 12. 13. 14. 15. 15.1. 15.2. 16. 16.1. 16.2. 17. 17.1. 17.2. 18. HDCP Diagnosing problems and Trouble Shooting Changing the lamp unit Technical characteristics of AXIUM HD-D45 model Overview of AXIUM HD-D45 model Fitting and connecting speaker columns, SAGEM AXIUM HD-D45 model Technical characteristics of AXIUM HD-D45S model Overview of AXIUM HD-D45S model Fitting and connecting additionally purchased external speakers Technical characteristics of AXIUM HD-D56B model Overview of AXIUM HD-D56B model Fitting and connecting additionally purchased external speakers Index NexTView EPG (AXIUM HD-D45 only) Installation Navigation Compatibility with High Definition Television Personalised settings Changing the security code Return to initial configuration Searching TV programmes Selecting the MENU language Setting for the economy mode Setting for the SPDIF output Adjusting the headphone output Setting the speaker mode Adjusting the Hi-Fi output Exit standby mode tuning Connecting equipment and configurations Connection advice Source configuration Configuration of computer sources Day-to-day use Picture adjustment Sound adjustment Sleep timer Choice of sources Choice of format Programme information Double picture mode selection Choosing a TV programme Picture hold Teletext 8 8 8 8 10 10 11 11 11 12 12 13 13 14 15 15 15 16 17 17 17 18 18 18 18 19 20 20 21 21 21 22 23 24 25 26 27 28 28 29 30 30 31 Indicates a hot surface. Warning about the onset of lamp depreciation · Safety regulations This SAGEM AXIUMTM Home Cinema Screen is a class I appliance; it MUST be connected to an electrical wall socket equipped with an earth. Your SAGEM AXIUMTM Home Cinema Screen is designed to function: ­ with a 220-240 V~, 50 Hz, AC (alternating current) network; ­ at an ambient temperature between +5°C and +35°C; ­ in areas with humidity less than 85%. (For more details, see chapter 15, 16, 17 according to the model). Note: If your SAGEM AXIUMTM Home Cinema Screen has been in a damp or cold place, leave it for four hours in the room where it will normally be used before switching on. To avoid danger of overheating or electrocution: ­ avoid direct exposure to sunlight and do not put naked flames or any other heat source under the appliance; do not expose the appliance to water, drips or splashes do not place objects filled with liquid, such as flower vases, on the appliance; do not expose the appliance to very dusty environments; avoid shocks and vibrations. ­ ­ ­ ­ You are recommended to disconnect the appliance from the power supply and the aerial: ­ during thunder storms; ­ when not used for long periods of time; ­ when the appliance is malfunctioning (see chapter 13). Before connecting or changing any connections to an audio-video/computer source (DVD player, PC, etc.), disconnect the power cord from each appliance. Make sure that ventilation grills are not obstructed by objects such as newspapers, table cloths, curtains etc. To avoid electric shocks, do not insert foreign bodies, such as needles or coins into the ventilation grills. Leave a gap of at least 10 cm around the appliance to allow sufficient ventilation. Before disconnecting the power lead, you are recommended to let the cooling fans of your SAGEM AXIUMTM Home Cinema Screen work for a few minutes. This will increase its working life. 1 2 ENGLISH 4. 4.1. 4.2. 5. Description of the buttons and indicator lights Buttons located within the righthand side door Front panel indicator lights and remote control receiver Remote Control 6 6 6 7 Warning concerning user and equipment safety. Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 3 Your SAGEM AXIUMTM Home Cinema Screen utilises high voltage. Never attempt to access the interior of the apparatus, except when you are changing the lamp unit. Do not open or dismantle this product as this will expose you to the risk of electrocution. This appliance will auto-detect the end of the lamp's working life. Replace the lamp as soon as the bulb indicator lights up on the front panel. When the SAGEM AXIUMTM Home Cinema lamp reaches the end of its working life you may hear a loud, sharp sound indicating it has expired. The appliance will only function when you replace the bulb. To avoid burns or the lamp unit damage whilst it is being replaced, you must disconnect the mains lead from the wall socket. Wait at least one hour before attempting to change the lamp unit. Make sure that you follow the whole replacement procedure described in 'Changing the lamp unit' on page 23. 2. Set Up 2.1. Fitting and connecting the speakers (AXIUM HD-D45 only) Model AXIUM HD-D45 see § 15.2 Model AXIUM HD-D45S see § 16.2 Model AXIUM HD-D56B see § 17.2 According to the model of your SAGEM AXIUMTM Home Cinema Screen, refer to the following paragraphs: 2.2. Aerial connection AXIUM HD-D45S only SPDIF IN SUB WF HI-FI OUT AUDIO AUDIO L R AV1 AV5 SERVICE AV4 ENVIRONMENT Preservation of the environment as part of a sustainable development logic is an essential concern of SAGEM SA. The desire of SAGEM SA is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, use and elimination. PACKAGING The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve packaging recovery and recycling infrastructures. To facilitate recycling, please respect the sorting rules set up locally for this kind of waste. BATTERIES If your product contains batteries, they must be disposed of at appropriate collection points. THE PRODUCT The crossed-out waste bin stuck on the product means that the product belongs to the family of electrical and electronic equipment. In this respect, the European regulations ask you to dispose of it selectively: · At sales points in the event of the purchase of similar equipment. · At the collection points made available to you locally (drop-off centre, selective collection, etc.). In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste, which can have an effect on the environment and human health. LAMP UNIT The worn-out lamp unit must be recycled. (Contact your waste recycling agency to obtain the address of the nearest depot). PC IN (AXIUM HD-D45S) S INTERLACED OR PROGRESSIVE Y AV2 Pb C Pr ANT DVI-D PC2 IN L L L AV3 R R R Insert the end of the coaxial cable leading from your aerial into the aerial input socket at the back of your SAGEM AXIUMTM Home Cinema Screen. Your SAGEM AXIUMTM Home Cinema Screen has two internal tuners (except model AXIUM HD-D45S, which only has one tuner) and one cable is sufficient to feed them both. 2.3. Mains connection Insert the mains plug into a 220-240V~ 50H zelectrical wall socket. 2.4. Switching on your SAGEM AXIUMTM Home Cinema Screen Switch the Home Cinema Screen on by pressing the ON/OFF switch on the lefthand side of your appliance (See § 15.1, 16.1, 17.1 according to the model). Setting up your remote control: Open the battery compartment cover and insert the two R6-1.5V type batteries. Make sure that the batteries are installed correctly. Do not use batteries of different types or rechargeable batteries. Switching on your SAGEM AXIUMTM Home Cinema Screen: Press the 1.2. Maintenance · · · · Before doing anything, disconnect the mains lead from the wall socket. Clean the cabinet using a soft, slightly damp cloth and a cloth with a non-abrasive, non wax detergent. Clean the screen carefully using a soft, damp cloth lightly impregnated with a soap solution. Never use benzene, alcohol or petroleum-based cleaning products as these could damage the finish and the screen. standby button on the remote control or righthand side door. NB: The on/off indicator light located on the front panel of your SAGEM AXIUMTM Home Cinema Screen flashes orange whilst the lamp is warming up, then goes out when the lamp is functioning. When you set up your SAGEM AXIUMTM Home Cinema Screen for the first time, you can take advantage of a rapid installation procedure after this warm-up phase (see chapter 3). Connecting other audio/video or computer appliances is covered in chapter 7. Before looking at this, proceed to the rapid installation. 3 4 Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 5 2.5. Switching off your SAGEM AXIUMTM Home Cinema Screen To put your SAGEM AXIUMTM Home Cinema Screen into standby mode, press the remote control or the standby button on the righthand side door. You can cancel standby mode within 5 seconds (indicator light flashes green) by pressing the standby button again on the remote control or the righthand side door. After this time, standby mode cannot be stopped. During the standby phase (approximately 1 minute), the indicator light on the front panel starts flashing orange. The state of real standby is only effective when this indicator light changes to red. In order to prolong the lamp's working life, do not interrupt the standby procedure, NEVER switch off your appliance using the mains switch or disconnect the wall plug unless the front panel LED is red. If you want to switch on your television set again, wait at least 10 seconds before pressing the switch on the left. standby button on the Frequency : Channels found : AUTO TUNING Searching 237 1 After accepting with the OK button, the automatic search begins and the channels are identified and saved automatically. The most current channels are automatically put in order according to the country that you chose. You can also interrupt the search at any time by pressing the MENU button. MENU key to stop searching 4. Description of the buttons and indicator lights 4.1. Buttons located within the righthand side door OK STBY Validation button (in menus). V- V+ 3. First Rapid Installation Your SAGEM AXIUMTM Home Cinema Screen is not preset to receive the wireless channels for your region. This rapid installation is automatically offered when you set up the appliance. It allows you to configure the basic elements of your product (menu languages, country, and channel reception). You can return to these settings at any time (see chapter 6). Select the menu language using the buttons key. OSD LANGUAGE ENGLISH ELLHNIKA FRANCAIS DEUTSCH ESPANOL ITALIANO NEDERLANDS PORTUGUES On/off button. Programme change button. PP+ Buttons for adjusting the volume. When the menu is called up, the buttons and , validate using the OK and then validate , , and are used for moving within the screens. 4.2. Front panel indicator lights and remote control receiver Select the country where you are by using the buttons with the OK button. Country France Germany Austria Italy Spain Netherlands Denmark Sweden Norway Finland Belgium Switzerland UK Portugal Greece Poland Russia Czech Republic SECAM PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL, SECAM PAL SECAM SECAM Colour System L B, G B, G B, G B, G B, G B, G B, G B, G B, G B, H B, G I B, G B, G D, K D, K D, K Stereo Internal temperature light: COUNTRY UK PORTUGAL GREECE FRANCE GERMANY AUSTRIA ITALY SPAIN Nicam L Two B/G carriers Two B/G carriers Two B/G carriers Nicam B/G Two B/G carriers Nicam B/G Nicam B/G Nicam B/G Nicam B/G Nicam B/G Two B/G carriers Nicam I Red flashing or fixed: Excessive internal temperature. Put you SAGEM AXIUMTM Home Cinema Screen into standby and wait for the indicator light to go out. Lamp indicator: Red flashing for 10s then going out: The lamp is worn out; prepare a replacement. Red flashing for 10s then remaining fixed (the appliance going into standby): Change the lamp (see chapter 14) On/standby light: Red: standby Flashing red: switch-on and standby phases Flashing green: Phase during which the order to go into standby can be cancelled. (see § 2.5) Light out: Functioning. Infra-red receiver: Reception of the remote control (*) For Australia, choose the Germany configuration. Remote control receiver: the infra-red receiver is located in the bottom/righthand corner of your SAGEM AXIUMTM Home Cinema Screen. All you have to do ...