User manual SAGEM AXIUM HD D45

Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 1 TABLE OF CONTENTS 1. 1.1. 1.2. Safety Maintenance 2 3 Precautions Set Up Fitting the speaker columns (optional) Aerial connection Mains connection Switch on Switching off your SAGEM AXIUMTM Home Cinema Screen 4 4 5 5 5 2 4 1. 1.1. Safety Precautions 2. 2.1. 2.2. 2.3. 2.4. 2.5. Respect all maintenance advice, safety precautions and instructions recommended in this user booklet are for your safety and to prolong the working life of the equipment. · Definitions 3. 4. 4.1. 4.2. Buttons the right side door Front panel indicator lights and remote control receiver 6 7 First Rapid Installation Description of the buttons and indicator lights Remote Control Personalised settings Changing the security code Return to initial configuration Searching TV programmes Choice of country Manual installation Automatic installation Modifying the programme list Choose the MENU language Setting for the economy mode Setting for the SPDIF output Adjusting the headphones output Setting the speaker mode Adjusting the Hi-Fi output Exit stanby mode tuning 6 6 7 8 8 8 8 8 9 9 9 10 10 10 11 11 11 11 Warning concerning user and equipment safety. 5. 6. 6.1. 6.2. 6.3. 6.3.1. 6.3.2. 6.3.3. 6.3.4. 6.4. 6.5. 6.6. 6.7. 6.8. 6.9. 6.10. Warning about the risk of electric shocks. Indicates a hot surface. Warning about the danger of the lamp depreciation · Safety regulations 7. 7.1. 7.2. 7.3. Connection advice Source configuration Configuration of computer sources Connecting equipment and configurations 12 12 13 14 This SAGEM AXIUMTM Home Cinema Screen is a class I appliance; it MUST be connected to an electrical wall socket equipped with an earth. Your SAGEM AXIUMTM Home Cinema Screen is designed to function: ­ with a 220-240 V~, 50-60 Hz, AC (alternating current) network; ­ at an ambient temperature between +5°C and +35°C; ­ in areas with humidity less than 85%. (For more details, see chapter 16). 8. 8.1. 8.2. 8.3. 8.4. 8.5. 8.6. 8.7. 8.8. 8.9. Picture adjustment Sound adjustment Sleep timer Choice of sources Choice of format Programme information Double picture mode selection Choosing a TV programme Picture hold Day-to-day use 14 14 15 16 16 16 17 17 17 17 To avoid danger of overheating or electrocution: ­ avoid direct exposure to sunlight and do not put naked flames or any other heat source under the appliance; do not expose the appliance to water drips or splashes; do not place objects filled with liquid, such as flower vases, on the appliance; do not expose the appliance to very dusty environments; avoid shocks and vibrations. ­ ­ ­ ­ 9. 10. 10.1. 10.2. Installation Navigation Teletext NexTView EPG Compatibility with High Definition Television HDCP Diagnosing Trouble Shooting Changing the lamp unit Index 18 19 19 19 You are recommended to disconnect the appliance from the power supply and the aerial: ­ during thunder storms; ­ when not used for long periods of time; ­ when the appliance is malfunctioning (see chapter 13). Before connecting or changing any connections to an audio-video/computer source (DVD player, PC, etc.), disconnect the power cord from each appliance. 11. 12. 13. 14. 15. 16. 16.1. 20 20 21 22 23 Make sure that ventilation grills are not obstructed by objects such as newspapers, table cloths, curtains etc. To avoid electric shocks, do not insert foreign bodies, such as needles or coins into the ventilation grills. Leave a gap of at least 10 cm around the appliance to allow sufficient ventilation. Technical characteristics Overall view 24 25 Before disconnecting the power lead, you are recommended to let the cooling fans of your SAGEM AXIUMTM Home Cinema Screen work for a few minutes. This will increase its working life. 1 2 ENGLISH Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 3 Your SAGEM AXIUMTM Home Cinema Screen utilises high voltage. Never attempt to access the interior of the apparatus, except when you are changing the lamp unit. Do not open or dismantle this product as this will expose you to the risk of electrocution. This appliance will auto-detect the end of the lamp's working life. Replace the lamp as soon as the bulb indicator lights up on the front panel. When the SAGEM AXIUMTM Home Cinema Screen lamp reaches the end of its working life, there could be a loud, sharp sound when it stops working. The appliance will only work when you replace the bulb. To avoid burns or the lamp unit damage whilst it is being replaced, you must disconnect the mains lead from the wall socket. Wait at least one hour before starting to change the lamp unit. Make sure that you follow the whole replacement procedure described in "Changing the lamp unit" on page 22. Only use suitable batteries that comply with the maker's specifications (see chapter 16). ­ the batteries supplied are not rechargeable; ­ pay particular attention to environmental matters; ­ take the defective or used batteries to the places provided for this effect in accordance with current regulations; never throw them in the dustbin. 2. Set Up 2.1. Fitting the speaker columns (optional) Take the speaker columns out of their packaging. Put the first speaker column beside the screen making the fixing holes coincide with those of the frame. Using the screw supplied and a screwdriver, fix the two lugs of the column against the frame. Do the same for the second speaker column. 1.2. Maintenance · · · · Before doing anything, disconnect the mains lead from the wall socket. Clean the cabinet using a soft, slightly damp cloth and a non-abrasive and non-wax detergent. Clean the screen carefully using a soft, damp cloth lightly impregnated with a soap solution. Never use benzene, alcohol or petroleum-based cleaning products as these could damage the finish and the screen. Connect each column to your SAGEM AXIUMTM Home Cinema Screen with the audio cables supplied. To hide the cables, start from the black and red terminals on the back of the column pushing the wires into the groove. Then continue like this up to the terminals of the television set. Do the same for the second speaker column. You have the possibility of connecting your own speakers to your SAGEM AXIUMTM Home Cinema Screen if these have impedance greater than or equal to 8 ohms. To do this, disconnect the speaker columns, connect your speakers instead, pass the wires in the grooves provided and deactivate the subwoofer (see §8.2). 2.2. Aerial connection SPDIF IN HI-FI OUT L R AV1 AV5 SERVICE AV4 AV2 INTERLACED OR PROGRESSIVE Y Pb AV3 Pr ANT DVI-D PC2 IN L L Y L R R R Insert the end of the coaxial cable leading from your aerial into the aerial input socket at the back of your SAGEM AXIUMTM Home Cinema Screen. Your SAGEM AXIUMTM Home Cinema Screen is fitted with 2 tuners, but only one cable is needed to supply both. 3 4 Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 5 2.3. Mains connection Insert the mains plug into a 220-240V~ 50-60H zelectrical wall socket. 3. First Rapid Installation 2.4. Switch on Switch the appliance on by pressing the ON/OFF switch on the left of your appliance (See § 16.1). Setting up your remote control: Open the battery compartment cover and insert the two R6-1.5V type batteries. Make sure that the batteries are installed correctly. Do not use batteries of different types or rechargeable batteries. Your SAGEM AXIUMTM Home Cinema Screen is not preset to receive the wireless channels for your region. This rapid installation is automatically offered when you set up the appliance. It allows you to configure the basic elements of your product (menu languages, country, and channel reception). You can return to these settings at any time (see chapter 6). Select the menu language using the buttons key. OSD LANGUAGE ENGLISH ELLHNIKA FRANCAIS DEUTSCH ESPANOL ITALIANO NEDERLANDS PORTUGUES COUNTRY UK PORTUGAL GREECE FRANCE GERMANY AUSTRIA ITALY SPAIN and , validate using the OK Country France Germany Austria Italy Spain Netherlands Denmark Sweden Norway Finland Belgium Switzerland UK Portugal Greece AUTO TUNING Colour SECAM PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL, SECAM System L B, B, B, B, B, B, B, B, B, B, B, I B, B, Stereo Switching on your SAGEM AXIUMTM Home Cinema Screen: Press the standby button on the remote control or right side door. NB: The on/off indicator light located on the front panel of your SAGEM AXIUMTM Home Cinema Screen flashes orange whilst the lamp is warming up, then goes out when the lamp is functioning. When you set up your SAGEM AXIUMTM Home Cinema Screen for the first time, you can take advantage of a rapid installation procedure after this warm-up phase (see chapter 3). Connecting other audio/video or computer appliances is covered in chapter 7. Before looking at this, proceed to the rapid installation. G G G G G G G G G H G 2.5. Switching off your SAGEM AXIUMTM Home Cinema Screen To put your SAGEM AXIUMTM Home Cinema Screen into standby, press the standby button on the remote control or the standby button on the right side door. You can cancel standby mode within 5 seconds (indicator light flashes green) by pressing the standby button again on the remote control or the right side door. After this time, standby mode cannot be stopped. During the standby phase (approximately 1 minute), the indicator light on the front panel starts flashing orange. The state of real standby is only effective when this indicator light changes to red. In order to prolong the lamp's working life, do not interrupt the standby procedure, NEVER switch off your appliance using the mains switch or disconnect the wall plug unless the front panel LED is red. If you want to switch on your television set again, wait at least 10 seconds before pressing the switch on the left. Searching Frequency : Channels found : 237 1 Nicam L Two B/G carriers Two B/G carriers Two B/G carriers Nicam B/G Two B/G carriers Nicam B/G Nicam B/G Nicam B/G Nicam B/G Nicam B/G Two B/G carriers Nicam I G G After accepting with the OK button, the automatic search begins and the channels are identified and saved automatically. The most current channels are automatically put in order according to the country that you chose. You can also interrupt the search at any time by pressing the MENU button. MENU key to stop searching 4. Description of the buttons and indicator lights 4.1. Buttons the right side door OK STBY Validation button (in menus). Programme change button. V- V+ On/off button. PP+ Buttons for adjusting the volume. When the menu is called up, the buttons , , and are used for moving within the screens. 5 6 ENGLISH Select the country where you are by using the buttons with the OK button. and then validate Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 7 4.2. Front panel indicator lights and remote control receiver Internal temperature light: Flashing red: Excessive internal temperature Put you SAGEM AXIUMTM Home Cinema Screen into standby and wait for the indicator light to go out. CODE 6. Personalised settings 6.1. Changing the security code IMAGE AUDIO GL LOCK PROTECTION SOURCES PC DATA CHANNEL MAN. EPG CHANGE CODE FACT. RESET MODIF. CODE CONFIG. USINE OPTIONS NO E NT E R C O NF I RM SOURCES DONNEES PC RECHERCHE INSTALL. CODE All installation screens can be protected by a personal code.The default code is 0000. This does not lock the installation screens. V- - - ERROU ---CHAINE MODIF. CODE CONFIG. USINE Lamp indicator: Flashing red: The lamp is worn out; prepare a replacement Fixed red: Change the lamp (see chapter 14) On/standby light: Red: standby Flashing red: switch-on and standby phases Flashing green: Phase during which the order to go into standby can be cancelled. (see § 2.5) Light out: Functioning. Press the MENU button, then choose "INSTALL" with the button then validate with the OK button. Choose "PROTECTION" then "CHANGE CODE", validate with the OK button. Enter your new code then confirm the same code in the confirmation screen accepting each time with the OK button. You can cancel change of code at any time using the MENU button. IMAGE CODE PROTECTION SOURCES PC DATA CHANNEL MAN. EPG AUDIO GL LOCK CHANGE CODE FACT. RESET MODIF. CODE CONFIG. USINE OPTIONS YES INSTALL. CODE V- - - ERROU CHAINE SOURCES DONNEES PC RECHERCHE MODIF. CODE CONFIG. USINE It is possible to extend protection to the whole television set. To do this, select "GL LOCK" and choose "YES" with the button . You will then be asked for your personal code each time you switch on your SAGEM AXIUMTM Home Cinema Screen. Remote control receiver: Your SAGEM AXIUMTM Home Cinema Screen is equipped with an innovative remote control reception system giving a very wide target field. In fact, the whole surface of the screen is sensitive to the remote control signals. All you have to do is aim at the screen from wherever you are situated. NB: To lock these screens, enter a different code than 0000. Always remember your new code. Enter 0000 to unlock. 6.2. Return to initial configuration IMAGE CODE 5. Colour buttons: Used in configuration menus, teletext and NexTView programme guide Pause: Picture or teletext page frozen Back: Return to the previous channel or teletext page. Choice of picture format Menu: Access to the menus of configuration and to the complementary Teletext functions PIP/PAP functions - Call up and choice of function - Screen selection - Source exchange Decrease audio volume Teletext on/mode Transparent/stop Teletext index Remote Control Teletext index Navigator: For moving in the menus and OK to accept or move the PIP window On-screen information and TOP Teletext NexTView programme guide Choice of picture source Choice of sound (mono or stereo) or language (see § 8.2) Mute Increase audio volume Programme selection Teletext - hidden text Teletext fast mode Numeric buttons AUDIO GL LOCK PROTECTION SOURCES PC DATA CHANNEL MAN. EPG CHANGE CODE FACT. RESET MODIF. CODE CONFIG. USINE OPTIONS YES INSTALL. CODE WARNING VERROU PROTECTION If necessary, you can automatically configure your SAGEM AXIUMTM Home Cinema Screen to the original settings. In this instance, all your personal settings will be lost (list of channels, country, languages...). SOURCES set will shutdown CHAINE the TV DONNEES PC MODIF. CODE CONTINUE BACK cancel RECHERCH key to CONFIG. USINE Previous setting will be lost Press the MENU button, then choose "INSTALL" using the button and validate with OK button. Enter your personal code then validate using the OK button (no code is requested for the initial 0000 code). Select "FACT. RESET" and validate with the OK button. A confirmation screen will invite you to continue by pressing the OK button or cancel with the BACK button. 6.3. Searching TV programmes The programmes are installed at the initial set-up. Nevertheless, the following functions are useful if you relocate to another region. 6.3.1. Choice of country IMAGE CODE PROTECTION SOURCES COUNTRY PC DATA MAN. SEARCH CHANNEL MAN. AUTO SCAN EPG LIST EDITION AUDIO OPTIONS UK PORTUGAL GREECE FRANCE GERMANY AUSTRIA ITALY SPAIN INSTALL. The choice of country allows the television set to automatically classify the channels during the automatic search. Press the MENU key. Select the "INSTALL" chapter using OK button. Select the "CHANNEL MAN." chapter using OK button. Select the "COUNTRY" chapter using OK button. Select the chosen country using buttons and . Your selection will be saved when you exit this menu using the BACK button. 7 8 Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 9 6.3.2. Manual installation · INSTALL. CODE IMAGE CODE GENERAL PROTECTION ATTENTION VERROU COUNTRY PC DATA MAN. SEARCH CHANNEL MAN. AUTO SCAN EPG LIST EDITION RECHERCHE CONFIG. USINE Touche BACK pour annuler CONTINUER DONNEES PC MODIF. CODE la configuration sera perdue SOURCES CHAINE AUDIO OPTIONS NON Select "MANUAL" then validate using OK button. A search screen is then displayed allowing you to check the programme found. Television programmes are searched and saved channel by channel. Select "CHANNEL MAN". and start the search using or When a picture is displayed on the screen, · You can decide to save your channel selection: Go to the "PROGR. NUMBER" No line and enter the position of the desired programme using 0 to 9 buttons. Move the cursor to "MEMO" and validate using OK button. You can try to obtain a better quality picture: Go to the "FINE TUNING" line and adjust the cursor using the buttons and . Move the cursor to "MEMO" and validate using OK button. You can decide not to save this channel selection: In this instance, restart the search. . · Change the programme name Go to the line of the programme name to be modified and press the yellow button to accept it. Enter the first characters. Move through the characters using the buttons . or Move forward by one character with the button then enter the second. Continue in the same way for the other characters (maximum of 6 characters). Finally, accept with the yellow button. PROTECTION SOURCES Apply noise reduction filter to a programme To get the best out of your SAGEM AXIUMTM Home Cinema Screen, a noise reduction filter can be applied to the channels if the quality of reception is poor. Go to the line of the programme name to be modified and press the blue button. Each pressure on the blue button applies the next filter. Apply a weak "1", medium "2", or strong "3" filter according to your reception. Select "0" if no filter is necessary. SEARCH FINE TUNING PROGR. NUMBER 00 MEMO Press the MENU button to exit. · 6.4. Choose the MENU language IMAGE SLEEP TIMER HEADPHONES LOUDSPEAKER HIFI VOLUME FREQUENCY · AUDIO OPTIONS OFF INSTALL. You can select the menu and information display language. Press the MENU button. ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES ECO MODE OSD LANGUAGE SPDIF SOURCE MAIN STEREO FIXED NO ENGLISH OFF MENU key to stop searching Restart this manual procedure for all the programmes you wish to memorise. Press on the MENU button to exit. Select the "OPTIONS" chapter using the OK button. Select the "OSD LANGUAGE" chapter using the OK button. Select the chosen language using the buttons and . 6.3.3. Automatic installation Select "AUTO SCAN" and validate using OK button. IMAGE CODE PROTECTION SOURCES COUNTRY PC DATA MAN. SEARCH CHANNEL MAN. AUTO SCAN EPG LIST EDITION CONTINUE CONTINUER DONNEES PC MODIF. CODE WARNING Touche BACK pour annuler la configuration sera perdue SOURCES CHAINE Press the MENU button to exit or the BACK button to return to the previous screen. AUDIO OPTIONS NON PROTECTION ATTENTION VERROU CODE GENERAL INSTALL. Your previous search will be erased and replaced by the new one, confirm by pressing OK button. All channels are searched and saved automatically. If the broadcast signal is recognised by the transmission of a teletext page, the channels will be automatically named and classified. You can decide to stop the search at any point in time, by using the MENU button. 6.5. Setting for the economy mode IMAGE SLEEP TIMER HEADPHONES LOUDSPEAKER HIFI VOLUME ECO MODE OSD LANGUAGE SPDIF SOURCE AUDIO OPTIONS OFF INSTALL. RECHERCHE previous settings CONFIG. USINE will be lost ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES You can decrease the power of the lamp to increase its working life and reduce its power consumption. This mode is particularly recommended if you watch your SAGEM AXIUMTM Home Cinema Screen in a dark room. MAIN STEREO FIXED YES ENGLISH OFF Press the MENU button. Select "OPTIONS" with the OK button. 6.3.4. Modifying the programme list IMAGE CODE PROTECTION SOURCES COUNTRY PC DATA MAN. SEARCH CHANNEL MAN. AUTO SCAN EPG LIST EDITION GENERAL NON Go to "ECO MODE" and choose the mode with buttons You can modify the programme list that is a result of your search at any time. and . Press the MENU button to exit. AUDIO OPTIONS INSTALL. CODE 6.6. Setting for the SPDIF output Press the MENU button. Select the "INSTALL" menu then "CHANNEL MAN" and finally "LIST EDITION" with the OK button. IMAGE SLEEP TIMER HEADPHONES LOUDSPEAKER HIFI VOLUME ECO MODE PROTECTION ATTENTION VERROU AUDIO OPTIONS OFF INSTALL. ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES MAIN STEREO FIXED YES LIST EDITION PROG. FREQ. NAME N.R. From this screen, you can: · 479,50 527,25 599,25 TF1 F2 F3 0 1 2 If you have a Home Cinema installation without the capability of adjusting the synchronization of the audio on the video, you can use your SAGEM AXIUMTM Home Cinema Screen as synchronization generator. By using the SPDIF input and output available on the back panel, the sound of your Home Cinema will be perfectly synchronized with the picture displayed. To use this function, you just have to state in this menu the source that you wish to synchronize. OSD LANGUAGE ENGLISH 1 2 3 4 5 DELETE V · 671,25 735,25 MOVE NAME C+ F5 N.R. OK 0 3 VIEW Delete a programme Go to the line of the programme to be deleted and press the red button. Move a programme Go to the line of the programme to be moved and press the green button to select it (a ">" appears to the left of the programme). Move it with buttons , then accept its or new position with the green button. SPDIF SOURCE AV5 Press the MENU button. Select "OPTIONS" with the OK button. Go to "SPDIF SOURCE" and choose the video source with the buttons and . Press the MENU button to exit. 9 10 ENGLISH MANUAL SEARCH NB: You can display the selected screen at any time by pressing the OK button. Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 11 6.7. Adjusting the headphones output IMAGE SLEEP TIMER HEADPHONES PIP/PAP STEREO FIXED YES ENGLISH AV5 LOUDSPEAKER HIFI VOLUME ECO MODE OSD LANGUAGE SPDIF SOURCE OFF 7. Connecting equipment and configurations AUDIO OPTIONS INSTALL. You can choose the audio source of the headphones output Press the MENU button. Select "OPTIONS" with the OK button. Go to "HEADPHONES" and choose the video source with the buttons and . "MAIN" will restore the sound of the full screen picture in PIP mode or the right-hand picture in PAP mode to the headphones. "PIP/PAP" will restore the sound of the inset picture in PIP mode or the left-hand picture in PAP mode to the headphones. NB: The PIP and PAP functions are described in § 8.7. Press the MENU button to exit. 7.1. Connection advice ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES Your SAGEM AXIUMTM Home Cinema Screen offers you a large selection of connectors to attach the equipment of your choice.You are advised to carry out the connections when the appliances are switched off. REAR PANEL HI-FI SYSTEME DVI D DV D 6.8. Setting the speaker mode IMAGE SLEEP TIMER HEADPHONES PIP/PAP STEREO FIXED YES ENGLISH AV5 LOUDSPEAKER HIFI VOLUME ECO MODE OSD LANGUAGE SPDIF SOURCE OFF DVD AUDIO OPTIONS INSTALL. ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES You can choose between mono and stereo or deactivate the sound from the columns to get the most out of your personal audio system (such as high-fidelity system or Home Cinema audio amplifier). Press the MENU button. Select "OPTIONS" with the OK button. Go to "LOUDSPEAKER" and choose the mode with the buttons and . Press the MENU button to exit. ANT DVI-D SERVICE AV5 AV4 INTERLACED OR PROGRESSIVE Y DV D SPDIF IN HI-FI OUT L AV1 OR DIGITAL RECORDER R AV2 Pb AV3 Pr PC2 IN L L Y L DIGITAL RECORDER R R R DVD OR DV D 6.9. Adjusting the Hi-Fi output IMAGE SLEEP TIMER HEADPHONES PIP/PAP STEREO AJUSTABLE YES ENGLISH AV5 LOUDSPEAKER HIFI VOLUME ECO MODE OSD LANGUAGE SPDIF SOURCE OFF AUDIO OPTIONS INSTALL. You can choose between two ways of adjusting the volume of this output: "FIXED": The volume must be adjusted on the audio system connected to the Hi-Fi output. "ADJUSTABLE": The volume of the audio system connected to the Hi-Fi output can be adjusted from the remote control using the buttons + and -. Press the MENU button. Select "OPTIONS" with the OK button. Go to "HI-FI VOLUME" and choose the mode with the buttons and . Press the MENU button to exit. AV1 AV2 AV2 AV4 AV5 Hifi C e Games Console HOME CINEMA AMPLIFIER VIDEO RECORDER OR VHS C+ DECODEUR ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES recommended for a DVD player, a DVDR player/recorder, a digital decoder (cable, satellite or wireless). Recommended for an analog decoder, or a digital decoder (cable, satellite or wireless). recommended for a VHS or SVHS video player. recommended for a games console. Recommended for a DVD player provided with Y Pb Pr outputs. This type of connection automatically detects "interlaced" or "progressive" mode. 6.10. Exit stanby mode tuning IMAGE CODE PROTECTION CONFIG SOURCES MANAGER PC DATA CHANNEL MAN. EPG AUTO CODE AUDIO OPTIONS INSTALL. This setting allows you to choose active mode or go to standby mode. · · Press the MENU button then go into "INSTALL". Select "SOURCES" then "MANAGER" "MANUAL": Exit from standby and go to standby mode by pressing the standby button on the remote control or right side door. "AUTO": Exit from standby or go to automatic standby controlled by the equipment plugged into "SCART" connectors on the rear panel. In this mode, new sources detected by the television set will be automatically displayed (except for the PC1 input). Press the MENU button to exit. This output can be connected to any audio system equipped with its own speakers such as a high-fidelity system. For better comfort of listening to your audio system, cut the sound of your SAGEM AXIUMTM Home Cinema Screen (see § 6.8). The DLPTM technology causes a slight delay in picture processing, so connect your amplifier to these sockets and not to those of the source (see § 6.9) PC2 IN SPDIF IN Recommended for connecting a PC or a DVD player equipped with "DVI D" socket. Only use a "DVI D" cable (graphics card). The DLPTM technology causes a slight delay in picture processing. To synchronize the sound with your SAGEM AXIUMTM Home Cinema Screen, connect the digital audio output of your DVD player to this output and recover the synchronized signal on SPDIF OUT. SPDIF OUT This output allows you to recover the signal sent to SPDIF IN after digital synchronization with the picture. Connect this output to the digital audio input of your Home Cinema audio amplifier. 11 12 Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 13 RIGHT SIDE DOOR IMAGE OK STBY 7.3. Configuration of computer sources AUDIO OPTIONS INSTALL. HEADPHONES CODE V- V+ recommended for headphones. Adjusting the headphones is covered in § 6.7. SOURCES PC DATA If a personal computer is used (PC or MAC), switch on your SAGEM AXIUMTM Home Cinema Screen before the computer. HORIZONTAL VERTICAL FREQUENCY PROTECTION PP+ 0 0 0 Press the MENU button, then choose "INSTALL" using the button and validate with OK. CHANNEL MAN. PHASE EPG AUTO IMAGE YES 0 Choose "PC DATA" then validate with OK. AUDIO A V 6 AV6 recommended when connecting a camcorder in VHS, S-VHS, 8 mm, Hi-8 or digital DVC format. Resolution (px) 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 Frequency (Hz) 60 66 72 75 85 60 72 75 85 60 1024 x 768 1024 x 768 1152 x 864 1152 x 864 1280 x 720 70 75 60 70 60 With this option, you can adjust the source coming from your PC in VGA mode (PC1) or DVI (PC2). In DVI, only the horizontal and vertical positions can be adjusted. Horizontal position: press to move it to the right. to move the picture to the left and AUDIO VGA V G A PC1 IN P C 1 recommended for the connection of a PC fitted with a "VGA" socket.A 3.5 mm audio jack socket allows you to connect sound. Vertical position: Press bottom. or to move the picture to the top or Frequency: This allows you to adjust the frequency to that of your computer's graphics card. When a flashing vertical bar appears, use this function to adjust the frequency. 7.2. Source configuration IMAGE CODE PROTECTION CONFIG SOURCES MANAGER AUTO CODE PC DATA CHANNEL MAN. EPG Phase: This allows finer synchronization with your computer's graphics card. Use this tuning when an unstable or flashing picture occurs. AUDIO OPTIONS INSTALL. Press the MENU key then select "INSTALL" using the button and validate using OK. If your code is not 0000, this screen is protected and you must enter your code. Select "SOURCES", then "CONFIG" and accept with OK. This option allows you to select the sources used but only displays them when you select sources in daily use. Automatic mode: This allows you to adjust everything automatically or not. Resolutions accepted (DVI-D and VGA entries): To ensure that the projection display is operating correctly with your computer make sure that you configure the display mode of your graphics card to a resolution lower than 1024 x 768. NB: Optimum stability is achieved with a frequency of 60 Hz (consult the documentation for your PC to configure it). / ). Choose the connector to be configured ( For each connector, you can: INPUT SOURCE