Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 1 TABLE OF CONTENTS 1. 1.1. 1.2. 2. 2.1. 2.2. 2.3. 2.4. 2.5. 3. Precautions Safety Maintenance Set Up Fitting and connecting the speakers (AXIUM HD-D45 only) Aerial connection Mains connection Switching on your SAGEM AXIUMTM Home Cinema Screen Switching off your SAGEM AXIUMTM Home Cinema Screen First Rapid Installation 2 2 3 4 4 4 4 4 5 5 1. 1.1. Safety Precautions Respect all maintenance advice, safety precautions and instructions recommended in this user manual booklet are for your safety and to prolong the working life of the equipment. · Definitions Warning about the risk of electric shocks. 6. 6.1. 6.2. 6.3. 6.4. 6.5. 6.6. 6.7. 6.8. 6.9. 6.10. 7. 7.1. 7.2. 7.3. 8. 8.1. 8.2. 8.3. 8.4. 8.5. 8.6. 8.7. 8.8. 8.9. 9. 10. 10.1. 10.2. 11. 12. 13. 14. 15. 15.1. 15.2. 16. 16.1. 16.2. 17. 17.1. 17.2. 18. HDCP Diagnosing problems and Trouble Shooting Changing the lamp unit Technical characteristics of AXIUM HD-D45 model Overview of AXIUM HD-D45 model Fitting and connecting speaker columns, SAGEM AXIUM HD-D45 model Technical characteristics of AXIUM HD-D45S model Overview of AXIUM HD-D45S model Fitting and connecting additionally purchased external speakers Technical characteristics of AXIUM HD-D56B model Overview of AXIUM HD-D56B model Fitting and connecting additionally purchased external speakers Index NexTView EPG (AXIUM HD-D45 only) Installation Navigation Compatibility with High Definition Television Personalised settings Changing the security code Return to initial configuration Searching TV programmes Selecting the MENU language Setting for the economy mode Setting for the SPDIF output Adjusting the headphone output Setting the speaker mode Adjusting the Hi-Fi output Exit standby mode tuning Connecting equipment and configurations Connection advice Source configuration Configuration of computer sources Day-to-day use Picture adjustment Sound adjustment Sleep timer Choice of sources Choice of format Programme information Double picture mode selection Choosing a TV programme Picture hold Teletext 8 8 8 8 10 10 11 11 11 12 12 13 13 14 15 15 15 16 17 17 17 18 18 18 18 19 20 20 21 21 21 22 23 24 25 26 27 28 28 29 30 30 31 Indicates a hot surface. Warning about the onset of lamp depreciation · Safety regulations This SAGEM AXIUMTM Home Cinema Screen is a class I appliance; it MUST be connected to an electrical wall socket equipped with an earth. Your SAGEM AXIUMTM Home Cinema Screen is designed to function: ­ with a 220-240 V~, 50 Hz, AC (alternating current) network; ­ at an ambient temperature between +5°C and +35°C; ­ in areas with humidity less than 85%. (For more details, see chapter 15, 16, 17 according to the model). Note: If your SAGEM AXIUMTM Home Cinema Screen has been in a damp or cold place, leave it for four hours in the room where it will normally be used before switching on. To avoid danger of overheating or electrocution: ­ avoid direct exposure to sunlight and do not put naked flames or any other heat source under the appliance; do not expose the appliance to water, drips or splashes do not place objects filled with liquid, such as flower vases, on the appliance; do not expose the appliance to very dusty environments; avoid shocks and vibrations. ­ ­ ­ ­ You are recommended to disconnect the appliance from the power supply and the aerial: ­ during thunder storms; ­ when not used for long periods of time; ­ when the appliance is malfunctioning (see chapter 13). Before connecting or changing any connections to an audio-video/computer source (DVD player, PC, etc.), disconnect the power cord from each appliance. Make sure that ventilation grills are not obstructed by objects such as newspapers, table cloths, curtains etc. To avoid electric shocks, do not insert foreign bodies, such as needles or coins into the ventilation grills. Leave a gap of at least 10 cm around the appliance to allow sufficient ventilation. Before disconnecting the power lead, you are recommended to let the cooling fans of your SAGEM AXIUMTM Home Cinema Screen work for a few minutes. This will increase its working life. 1 2 ENGLISH 4. 4.1. 4.2. 5. Description of the buttons and indicator lights Buttons located within the righthand side door Front panel indicator lights and remote control receiver Remote Control 6 6 6 7 Warning concerning user and equipment safety. Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 3 Your SAGEM AXIUMTM Home Cinema Screen utilises high voltage. Never attempt to access the interior of the apparatus, except when you are changing the lamp unit. Do not open or dismantle this product as this will expose you to the risk of electrocution. This appliance will auto-detect the end of the lamp's working life. Replace the lamp as soon as the bulb indicator lights up on the front panel. When the SAGEM AXIUMTM Home Cinema lamp reaches the end of its working life you may hear a loud, sharp sound indicating it has expired. The appliance will only function when you replace the bulb. To avoid burns or the lamp unit damage whilst it is being replaced, you must disconnect the mains lead from the wall socket. Wait at least one hour before attempting to change the lamp unit. Make sure that you follow the whole replacement procedure described in 'Changing the lamp unit' on page 23. 2. Set Up 2.1. Fitting and connecting the speakers (AXIUM HD-D45 only) Model AXIUM HD-D45 see § 15.2 Model AXIUM HD-D45S see § 16.2 Model AXIUM HD-D56B see § 17.2 According to the model of your SAGEM AXIUMTM Home Cinema Screen, refer to the following paragraphs: 2.2. Aerial connection AXIUM HD-D45S only SPDIF IN SUB WF HI-FI OUT AUDIO AUDIO L R AV1 AV5 SERVICE AV4 ENVIRONMENT Preservation of the environment as part of a sustainable development logic is an essential concern of SAGEM SA. The desire of SAGEM SA is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, use and elimination. PACKAGING The presence of the logo (green dot) means that a contribution is paid to an approved national organisation to improve packaging recovery and recycling infrastructures. To facilitate recycling, please respect the sorting rules set up locally for this kind of waste. BATTERIES If your product contains batteries, they must be disposed of at appropriate collection points. THE PRODUCT The crossed-out waste bin stuck on the product means that the product belongs to the family of electrical and electronic equipment. In this respect, the European regulations ask you to dispose of it selectively: · At sales points in the event of the purchase of similar equipment. · At the collection points made available to you locally (drop-off centre, selective collection, etc.). In this way you can participate in the re-use and upgrading of Electrical and Electronic Equipment Waste, which can have an effect on the environment and human health. LAMP UNIT The worn-out lamp unit must be recycled. (Contact your waste recycling agency to obtain the address of the nearest depot). PC IN (AXIUM HD-D45S) S INTERLACED OR PROGRESSIVE Y AV2 Pb C Pr ANT DVI-D PC2 IN L L L AV3 R R R Insert the end of the coaxial cable leading from your aerial into the aerial input socket at the back of your SAGEM AXIUMTM Home Cinema Screen. Your SAGEM AXIUMTM Home Cinema Screen has two internal tuners (except model AXIUM HD-D45S, which only has one tuner) and one cable is sufficient to feed them both. 2.3. Mains connection Insert the mains plug into a 220-240V~ 50H zelectrical wall socket. 2.4. Switching on your SAGEM AXIUMTM Home Cinema Screen Switch the Home Cinema Screen on by pressing the ON/OFF switch on the lefthand side of your appliance (See § 15.1, 16.1, 17.1 according to the model). Setting up your remote control: Open the battery compartment cover and insert the two R6-1.5V type batteries. Make sure that the batteries are installed correctly. Do not use batteries of different types or rechargeable batteries. Switching on your SAGEM AXIUMTM Home Cinema Screen: Press the 1.2. Maintenance · · · · Before doing anything, disconnect the mains lead from the wall socket. Clean the cabinet using a soft, slightly damp cloth and a cloth with a non-abrasive, non wax detergent. Clean the screen carefully using a soft, damp cloth lightly impregnated with a soap solution. Never use benzene, alcohol or petroleum-based cleaning products as these could damage the finish and the screen. standby button on the remote control or righthand side door. NB: The on/off indicator light located on the front panel of your SAGEM AXIUMTM Home Cinema Screen flashes orange whilst the lamp is warming up, then goes out when the lamp is functioning. When you set up your SAGEM AXIUMTM Home Cinema Screen for the first time, you can take advantage of a rapid installation procedure after this warm-up phase (see chapter 3). Connecting other audio/video or computer appliances is covered in chapter 7. Before looking at this, proceed to the rapid installation. 3 4 Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 5 2.5. Switching off your SAGEM AXIUMTM Home Cinema Screen To put your SAGEM AXIUMTM Home Cinema Screen into standby mode, press the remote control or the standby button on the righthand side door. You can cancel standby mode within 5 seconds (indicator light flashes green) by pressing the standby button again on the remote control or the righthand side door. After this time, standby mode cannot be stopped. During the standby phase (approximately 1 minute), the indicator light on the front panel starts flashing orange. The state of real standby is only effective when this indicator light changes to red. In order to prolong the lamp's working life, do not interrupt the standby procedure, NEVER switch off your appliance using the mains switch or disconnect the wall plug unless the front panel LED is red. If you want to switch on your television set again, wait at least 10 seconds before pressing the switch on the left. standby button on the Frequency : Channels found : AUTO TUNING Searching 237 1 After accepting with the OK button, the automatic search begins and the channels are identified and saved automatically. The most current channels are automatically put in order according to the country that you chose. You can also interrupt the search at any time by pressing the MENU button. MENU key to stop searching 4. Description of the buttons and indicator lights 4.1. Buttons located within the righthand side door OK STBY Validation button (in menus). V- V+ 3. First Rapid Installation Your SAGEM AXIUMTM Home Cinema Screen is not preset to receive the wireless channels for your region. This rapid installation is automatically offered when you set up the appliance. It allows you to configure the basic elements of your product (menu languages, country, and channel reception). You can return to these settings at any time (see chapter 6). Select the menu language using the buttons key. OSD LANGUAGE ENGLISH ELLHNIKA FRANCAIS DEUTSCH ESPANOL ITALIANO NEDERLANDS PORTUGUES On/off button. Programme change button. PP+ Buttons for adjusting the volume. When the menu is called up, the buttons and , validate using the OK and then validate , , and are used for moving within the screens. 4.2. Front panel indicator lights and remote control receiver Select the country where you are by using the buttons with the OK button. Country France Germany Austria Italy Spain Netherlands Denmark Sweden Norway Finland Belgium Switzerland UK Portugal Greece Poland Russia Czech Republic SECAM PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL PAL, SECAM PAL SECAM SECAM Colour System L B, G B, G B, G B, G B, G B, G B, G B, G B, G B, H B, G I B, G B, G D, K D, K D, K Stereo Internal temperature light: COUNTRY UK PORTUGAL GREECE FRANCE GERMANY AUSTRIA ITALY SPAIN Nicam L Two B/G carriers Two B/G carriers Two B/G carriers Nicam B/G Two B/G carriers Nicam B/G Nicam B/G Nicam B/G Nicam B/G Nicam B/G Two B/G carriers Nicam I Red flashing or fixed: Excessive internal temperature. Put you SAGEM AXIUMTM Home Cinema Screen into standby and wait for the indicator light to go out. Lamp indicator: Red flashing for 10s then going out: The lamp is worn out; prepare a replacement. Red flashing for 10s then remaining fixed (the appliance going into standby): Change the lamp (see chapter 14) On/standby light: Red: standby Flashing red: switch-on and standby phases Flashing green: Phase during which the order to go into standby can be cancelled. (see § 2.5) Light out: Functioning. Infra-red receiver: Reception of the remote control (*) For Australia, choose the Germany configuration. Remote control receiver: the infra-red receiver is located in the bottom/righthand corner of your SAGEM AXIUMTM Home Cinema Screen. All you have to do is aim at this spot with the remote control. 5 6 ENGLISH Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 7 5. 6. Remote Control Personalised settings 6.1. Changing the security code Colour buttons: used in the settings menu, teletext and EPG, which is the NexTView program guide (except AXIUM HDD45S model) Teletext index Navigator: For moving in the menus and OK to accept or move the PIP window On-screen information and TOP Teletext EPG : NexTView programme guide (except model AXIUM HD-D45S) Choice of picture source Menu: Access to the menus of configuration and to the complementary Teletext functions PIP/PAP functions - Call up and choice of function - Screen selection - Source exchange Decrease audio volume Teletext on/mode Transparent/stop Teletext index Choice of sound (mono or stereo) or language (see § 8.2) Mute Increase audio volume Programme selection Teletext - hidden text Teletext fast mode Numeric buttons Pause: Pause/Freeze teletext of picture Back: return to the channel or return to the previous menu Choice of picture format IMAGE CODE PROTECTION SOURCES PC DATA CHANNEL MAN. EPG AUDIO GL LOCK CHANGE CODE FACT. RESET MODIF. CODE CONFIG. USINE OPTIONS NO E NT ER C O N F I RM SOURCES DONNEES PC RECHERCHE INSTALL. CODE All installation screens can be protected by a personal code.The default code is 0000. This does not lock the installation screens. V- - - ERROU ---CHAINE MODIF. CODE CONFIG. USINE Press the MENU button, then choose `INSTALL' with the button then validate with the OK button. Choose `PROTECTION' then `CHANGE CODE', validate with the OK button. Enter your new code then confirm the same code in the confirmation screen accepting each time with the OK button. You can cancel change of code at any time using the MENU button. IMAGE CODE PROTECTION SOURCES PC DATA CHANNEL MAN. EPG AUDIO GL LOCK CHANGE CODE FACT. RESET MODIF. CODE CONFIG. USINE OPTIONS YES INSTALL. CODE V- - - ERROU CHAINE SOURCES DONNEES PC RECHERCHE MODIF. CODE CONFIG. USINE It is possible to extend protection to the whole television set. To do this, select `GL LOCK' and choose `YES' with the button . You will then be asked for your personal code each time you switch on your SAGEM AXIUMTM Home Cinema Screen. NB: To lock these screens, enter a different code than 0000. Always remember your new code. Enter 0000 to unlock. NB: AXIUM HD-D45S model has no `EPG' function. 6.2. Return to initial configuration IMAGE CODE PROTECTION SOURCES PC DATA CHANNEL MAN. EPG AUDIO GL LOCK CHANGE CODE FACT. RESET MODIF. CODE CONFIG. USINE OPTIONS YES INSTALL. CODE WARNING VERROU PROTECTION If necessary, you can automatically configure your Sagem Axium Home Cinema Screen to the original default factory settings. In this instance, all your personal settings will be lost (list of channels, country, languages...). SOURCES set will shutdown CHAINE the TV DONNEES PC MODIF. CODE CONTINUE BACK cancel RECHERCH key to CONFIG. USINE Previous setting will be lost Press the MENU button, then choose `INSTALL' using the button and validate with OK button. Enter your personal code then validate using the OK button (no code is requested for the initial 0000 code). Select `FACT. RESET' and validate with the OK button. A confirmation screen will invite you to continue by pressing the OK button or cancel with the BACK button. NB: AXIUM HD-D45S model has no `EPG' function. 6.3. Searching TV programmes The programmes are installed at the initial set-up. Nevertheless, the following functions are useful if you relocate to another region. 6.3.1. Choice of country IMAGE CODE PROTECTION SOURCES COUNTRY PC DATA MAN. SEARCH CHANNEL MAN. AUTO SCAN EPG LIST EDITION AUDIO OPTIONS UK PORTUGAL GREECE FRANCE GERMANY AUSTRIA ITALY SPAIN INSTALL. The choice of country allows the television set to automatically classify the channels during the automatic search. Press the MENU key. Select the `INSTALL' chapter using OK button. Select the `CHANNEL MAN.' chapter using OK button. Select the `COUNTRY' chapter using OK button. Select the chosen country using buttons and . Your selection will be saved when you exit this menu using the BACK button. NB: AXIUM HD-D45S model has no `EPG' function. 7 8 Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 9 6.3.2. Manual installation IMAGE AUDIO OPTIONS INSTALL. LIST EDITION From this screen, you can: NAME N.R. Select `MANUAL' then validate using OK button. A search screen is then displayed allowing you to check the programme found. PROG. FREQ. · 479,50 527,25 599,25 671,25 TF1 F2 F3 C+ 0 1 2 0 1 2 3 4 5 DELETE V CODE GENERAL PROTECTION ATTENTION VERROU COUNTRY PC DATA MAN. SEARCH CHANNEL MAN. AUTO SCAN EPG LIST EDITION RECHERCHE CONFIG. USINE Touche BACK pour annuler CONTINUER DONNEES PC MODIF. CODE la configuration sera perdue SOURCES CHAINE NON CODE PROTECTION SOURCES Television programmes are searched and saved channel by channel. Select `CHANNEL MAN'. and start the search using or When a picture is displayed on the screen, · You can decide to save your channel selection: Go to the `PROGR. NUMBER' No line and enter the position of the desired programme using 0 to 9 buttons. Move the cursor to `MEMO' and validate using OK button. You can try to obtain a better quality picture: Go to the `FINE TUNING' line and adjust the cursor using the buttons . and Move the cursor to `MEMO' and validate using OK button. You can decide not to save this channel selection: In this instance, restart the search. . · 735,25 MOVE NAME F5 N.R. OK 3 VIEW Delete a programme Go to the line of the programme to be deleted and press the red button. Move a programme Go to the line of the programme to be moved and press the green button to select it (a `>' appears to the left of the or programme). Move it with buttons , then accept its new position with the green button. · SEARCH FINE TUNING PROGR. NUMBER 00 MEMO · · FREQUENCY · Apply noise reduction filter to a programme To get the best out of your SAGEM AXIUMTM Home Cinema Screen, a noise reduction filter can be applied to the channels if the quality of reception is poor. MENU key to stop searching Restart this manual procedure for all the programmes you wish to memorise. Press on the MENU button to exit. Go to the line of the programme name to be modified and press the blue button. Each pressure on the blue button applies the next filter. Apply a weak `1', medium `2', or strong `3' filter according to your reception. Select `0' if no filter is necessary. NB: You can display the selected screen at any time by pressing the OK button. Press the MENU button to exit. NB: AXIUM HD-D45S model has no `EPG' function. 6.3.3. Automatic installation Select `AUTO SCAN' and validate using OK button. IMAGE CODE PROTECTION SOURCES COUNTRY PC DATA MAN. SEARCH CHANNEL MAN. AUTO SCAN EPG LIST EDITION CONTINUE CONTINUER DONNEES PC MODIF. CODE WARNING Touche BACK pour annuler la configuration sera perdue SOURCES CHAINE 6.4. Selecting the MENU language INSTALL. CODE You can select the menu and information display language. IMAGE SLEEP TIMER HEADPHONES LOUDSPEAKER AUDIO OPTIONS NON PROTECTION ATTENTION VERROU GENERAL Your previous search will be erased and replaced by the new one, confirm by pressing OK button. All channels are searched and saved automatically. If the broadcast signal is recognised by the transmission of a teletext page, the channels will be automatically named and classified. You can decide to stop the search at any point in time, by using the MENU button. AUDIO OPTIONS OFF INSTALL. Press the MENU button. ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES HIFI VOLUME ECO MODE OSD LANGUAGE SPDIF SOURCE MAIN STEREO FIXED NO ENGLISH OFF Select the `OPTIONS' chapter using the OK button. Select the `OSD LANGUAGE' chapter using the OK button. Select the chosen language using the buttons and . RECHERCHE previous settings CONFIG. USINE will be lost Press the MENU button to exit or the BACK button to return to the previous screen. 6.5. Setting for the economy mode IMAGE AUDIO OPTIONS INSTALL. NB: AXIUM HD-D45S model has no `EPG' function. 6.3.4. Modifying the programme list IMAGE CODE PROTECTION SOURCES COUNTRY PC DATA MAN. SEARCH CHANNEL MAN. AUTO SCAN EPG LIST EDITION GENERAL AUDIO OPTIONS NON INSTALL. CODE You can modify the programme list that is a result of your search at any time. Press the MENU button. SLEEP TIMER HEADPHONES LOUDSPEAKER PROTECTION ATTENTION VERROU HIFI VOLUME ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES OFF MAIN STEREO FIXED You can decrease the power of the lamp to increase its working life and reduce its power consumption. This mode is particularly recommended if you watch your SAGEM AXIUMTM Home Cinema Screen in a dark room. Press the MENU button. Select the `INSTALL' menu then `CHANNEL MAN' and finally `LIST EDITION' with the OK button. ECO MODE OSD LANGUAGE SPDIF SOURCE YES ENGLISH OFF Select `OPTIONS' with the OK button. Go to `ECO MODE' and choose the mode with buttons and . Press the MENU button to exit. NB: AXIUM HD-D45S model has no `EPG' function. 9 10 ENGLISH MANUAL SEARCH Change the programme name Go to the line of the programme name to be modified and press the yellow button to accept it. Enter the first characters. Move through the characters using the buttons . or Move forward by one character with the button then enter the second. Continue in the same way for the other characters (maximum of 6 characters). Finally, accept with the yellow button. Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 11 6.6. Setting for the SPDIF output IMAGE AUDIO OFF MAIN STEREO FIXED YES ENGLISH AV5 · Your SAGEM AXIUMTM Home Cinema Screen has an SPDIF digital audio input and output giving you: 1. Excellent quality sound thanks to the absence of analogue conversion. 2. Perfect synchronization of the Dolby Digital or DTS digital sound of your home cinema system with the picture. · The digital output is always available, whatever the source displayed (aerial-type input, péritels, AV, AV4, AV5, PC1 IN, PC2 IN). It can be connected directly to your home cinema amplifier or to an external analogue-digital converter. OPTIONS INSTALL. Continuation of page 11, AXIUM HD-D56B: To use external speakers not supplied, select mono or stereo in the MODE HP INT. option and select NO for the WOOFER option (see page 16). See paragraph 17.2 for connecting external speakers. To use your personal audio system (hi-fi system or Home Cinema audio amplifier): Select OFF in the MODE HP INT. option. If you do this, the internal and external speakers are disabled. SLEEP TIMER HEADPHONES LOUDSPEAKER HIFI VOLUME ECO MODE OSD LANGUAGE SPDIF SOURCE ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES Other models: To use your personal audio system (hi-fi system or Home Cinema audio amplifier): Select OFF in the MODE HP INT. option. If you do this, the internal and external speakers are disabled. Press the MENU button. Select `OPTIONS' with the OK button. Go to `LOUDSPEAKER' and choose the mode with the buttons Press the MENU button to exit. and . The digital input can be associated with one of your external sources (except aerial input). Use the OPTIONS menu to choose which SPDIF input video source is to be associated. However, make sure that you also connect your source's analogue audio if you want to have PIP/PAP sound mode in the headphones. Press the MENU button. Select `OPTIONS' with the OK button. Go to `SPDIF SOURCE' and choose the video source with the buttons Press the MENU button to exit. and . 6.9. Adjusting the Hi-Fi output IMAGE SLEEP TIMER HEADPHONES LOUDSPEAKER HIFI VOLUME ECO MODE OSD LANGUAGE SPDIF SOURCE AUDIO OPTIONS OFF INSTALL. You can choose between two ways of adjusting the volume of this output: ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES The digital audio system of your SAGEM AXIUMTM Home Cinema Screen functions equally well with SPDIF flow of PCM type (in which case the audio is both resynchronized with the picture on the SPDIF output and restored to the speakers and the Hifi output), or with Dolby Digital or DTS type (in which case the speaker and Hifi outputs are cut, and the digital flow is restored and resynchronized on the SPDIF output to be decoded by your external Home Cinema 5.1 amplifier). Dolby DIGITAL and DTS cannot be restored by your SAGEM AXIUMTM Home Cinema Screen. Therefore, these need an external amplifier compatible with these two formats. Caution! The in/out SPDIF digital audio system of your SAGEM AXIUMTM Home Cinema Screen functions at 32, 44.1 and 48kHz. Make sure that your source is not configured to different frequencies. PIP/PAP STEREO AJUSTABLE YES ENGLISH AV5 `FIXED': The volume must be adjusted on the audio system connected to the Hi-Fi output. `ADJUSTABLE': The volume of the audio system connected to the Hi-Fi output can be adjusted from the remote control using the buttons + and -. Press the MENU button. Select `OPTIONS' with the OK button. 6.7. Adjusting the headphone output IMAGE SLEEP TIMER HEADPHONES PIP/PAP STEREO FIXED YES ENGLISH AV5 LOUDSPEAKER HIFI VOLUME ECO MODE OSD LANGUAGE SPDIF SOURCE OFF Go to `HI-FI VOLUME' and choose the mode with the buttons and . AUDIO OPTIONS INSTALL. You can choose the audio source of the headphone output Press the MENU button. Select `OPTIONS' with the OK button. Go to `HEADPHONES' and choose the video source with the and . buttons `MAIN' will restore the sound of the full screen picture in PIP mode or the right-hand picture in PAP mode to the headphones. `PIP/PAP' will restore the sound of the inset picture in PIP mode or the left-hand picture in PAP mode to the headphones. NB: The PIP and PAP functions are described in § 8.7. Press the MENU button to exit. Press the MENU button to exit. 6.10. Exit standby mode tuning IMAGE CODE PROTECTION CONFIG SOURCES MANAGER PC DATA CHANNEL MAN. EPG AUTO CODE ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES AUDIO OPTIONS INSTALL. This setting allows you to choose active mode or go to standby mode. · · Press the MENU button then go into `INSTALL'. Select `SOURCES' then `MANAGER' `MANUAL': Exit from standby and go to standby mode by pressing the standby button on the remote control or righthand side door. 6.8. Setting the speaker mode IMAGE SLEEP TIMER HEADPHONES LOUDSPEAKER HIFI VOLUME ECO MODE OSD LANGUAGE SPDIF SOURCE `AUTO': Exit from standby or go to automatic standby controlled by the equipment plugged into `SCART' connectors on the rear panel. In this mode, new sources detected by the television set will be automatically displayed. OPTIONS OFF AUDIO INSTALL. In the menu MODE HP INT., you can choose between mono, stereo or OFF. · AXIUM HD-D45S : The OFF mode disables the internal speakers and allows you to enable and connect any external speakers not supplied. (See paragraph 16.2 or paragraph 16.2) Press the MENU button to exit. ENGLISH FRANCAIS DEUTSCH IT ESPANOL PORTUGUES PIP/PAP STEREO FIXED YES ENGLISH AV5 · AXIUM HD-D56B : To use the internal speakers: Select mono or stereo in the MODE HP INT. option and select YES for the WOOFER option (see page 16). If you do this, you should not connect external speakers to the television set. 11 12 Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 13 7. 7.1. Connection advice Your SAGEM AXIUMTM Home Cinema Screen offers you a large selection of connectors to attach the equipment of your choice.You are advised to carry out the connections when the appliances are switched off. REAR PANEL BASE WOOFER HI-FI SYSTEME AUDIO OK VV+ Connecting equipment and configurations RIGHTHAND SIDE DOOR STBY HEADPHONES PP+ recommended for headphones. Adjusting the headphones is covered in § 6.7. (AXIUM HD-D45S only) A V 6 AV6 recommended when connecting a camcorder in VHS, S-VHS, 8 mm, Hi-8 or digital DVC format. DVI D DV D DVD DV D SPDIF IN OUT L AV1 AV5 AV4 R AUDIO AUDIO SUB WF HI-FI AUDIO VGA P C 1 V G A PC1 IN i N OR DIGITAL RECORDER SERVICE S INTERLACED OR PROGRESSIVE Pb C AV3 Pr ANT DVI-D L L L PC2 IN Y AV2 PC1 IN: not found on model AXIUM HD-D45S (except model AXIUM HD-D45S) Recommended for connecting a PC computer equipped with a `VGA' output. socket.A 3.5 mm audio jack socket allows you to connect sound. DIGITAL RECORDER 7.2. Source configuration DVD OR DV D R R R IMAGE OR CODE AUDIO OPTIONS INSTALL. Press the MENU key then select `INSTALL' using the button and validate using OK. C+ DECODEUR PC IN (AXIUM HD-D45S) C e Games Console HOME CINEMA AMPLIFIER VIDEO RECORDER VHS PROTECTION CONFIG SOURCES MANAGER PC DATA AUTO CODE If your code is not 0000, this screen is protected and you must enter your code. AV1 AV2 AV3 AV4 AV5 Hifi Recommended for a DVD player, a DVDR player/recorder, a digital decoder (cable, satellite or wireless). Recommended for an analogue decoder, or a digital decoder (cable, satellite or wireless). Recommended for a VHS, SVHS videocassette recorder, a DVD player or digital decoder. Recommended for a games console. Recommended for a DVD player provided with Y Pb Pr outputs. This type of connection automatically detects `interlaced' or `progressive' mode. This output can be connected to any audio system equipped with its own speakers such as a high-fidelity system. For better comfort of listening to your audio system, cut the sound of your SAGEM AXIUMTM Home Cinema Screen (see § 6.8). The DLPTM technology causes a slight delay in picture processing, so connect your amplifier to these sockets and not to those of the source (see § 6.9) (PC IN on AXIUM HD-D45S model only): Recommended for connecting a PC or a DVD player equipped with `DVI D' socket. Only use a `DVI D' cable (graphics card). The DLPTM technology causes a slight delay in picture processing. To synchronise the sound with your SAGEM AXIUMTM Home Cinema Screen, connect the digital audio output of your DVD player to this output and recover the synchronized signal on SPDIF OUT. This output allows you to recover the signal sent to SPDIF IN after digital synchronisation with the picture. Connect this output to the digital audio input of your Home Cinema audio amplifier. Select `SOURCES', then `CONFIG' and accept with OK. CHANNEL MAN. EPG This option allows you to select the sources used but only displays them when you select sources in daily use. Choose the connector to be configured ( Note: AXIUM HD-D45S model has no `EPG' function. INPUT SOURCE N° NAME N.R. / ). For each connector, you can: SCART 1 SCART 2 SCART 3 AV 4 AV 5 AV 6 PC 1 PC 2 YES YES YES YES YES YES YES YES SOURCE CHOOSE NAME ------ -- -----------------------------------NAME N.R. OK PC2 IN SPDIF IN 0 0 0 0 0 0 · Validate connected equipment Press the red button several times until `YES' (or `NO' for an unused connector) is displayed. Select `C+' if you have connected your C+ decoder to SCART 2. In this instance, enter the C+ programme number at once. · VIEW Choosing a pre-programmed name Press the green button several times (DVD, DVDR, C+, DEC, MAG, GAMES). NB: · You can display the selected channel at any time by pressing the OK button. · (AXIUM HD-D45S only): This output allows you to connect an external active woofer. Its volume follows that of the speakers. However, it is possible to vary its level independently of the speakers: Press the MENU button, select SOUND then ADVANCED then WOOFER VOLUME. SPDIF OUT SUB WF Choosing a personlised name Press the yellow button to move to edit mode. Scroll through the characters using the buttons . Go to the next character using . Finally, press the yellow button to validate. · SERVICE Reserved for servicing personnel. · AXIUM HD-D45S model does not have a PC1 input. PC2 is called PC on the screen of the model AXIUM HD-D45S. Press the MENU button to exit. · Choosing a noise reducer You can apply a noise reducer to some sources such as a video player by scrolling through them by pressing the blue button more than once (none `0', weak `1', medium `2', strong `3'). 13 14 ENGLISH Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 15 7.3. Configuration of computer sources IMAGE CODE PROTECTION SOURCES PC DATA CHANNEL MAN. PHASE AUTO IMAGE YES EPG FREQUENCY VERTICAL HORIZONTAL 8.2. Sound adjustment ADJUSTMENTS POSSIBLE BY REMOTE CONTROL AUDIO OPTIONS INSTALL. If a personal computer is used (PC or MAC), switch on your SAGEM AXIUMTM Home Cinema Screen before the computer. NB: AXIUM HD-D45S model has no `EPG' function. 0 0 0 0