Thank you for purchasing the Saitek ST200 USB Control Stick. With its ergonomicallydesigned pistol grip and sculptured palm rest, this game controller will give you countless hours of exciting, yet comfortable, game play! Moreover, since it was carefully developed to fit a wide variety of hand sizes, it will probably feel like it was made especially for you! The ST200 USB Control Stick was designed for IBM PC and compatible systems, and will work with Windows® 95/98/Millennium-based games. As shown under Features and Controls, this joystick boasts 3 thumb-controlled fire buttons, plus an easily-accessible quick-fire finger trigger, all ideally located at the top of the grip. You'll also appreciate the smooth and fluid operation of the built-in lever throttle. All these features add up to a joystick that's perfectly suited for many different games, including flight simulations, racing games, and so much more! 2. INSTALLING THE SAITEK ST200 a. With your computer switched on, close down any programs that are currently running. b. Plug the Saitek ST200 USB Control Stick into your Right-handed, left-handed? Simply adjust the throttle! computer's USB port (or a USB hub, if you have The throttle can be positioned on one). either side of the unit, allowing c. When the Add New Hardware Wizard appears, anyone to play comfortably! To simply follow the on-screen instructions. switch the throttle control from one d. When prompted, select Search for the best side to the other, use a small coin driver for your device. to remove the screws on both e. At the next screen, click on the CD-ROM drive sides of the unit (see Features ® option, insert your Windows CD, and click on and Controls for the screw locaNext. Note: Some computers don't come with a tions). Next, remove the throttle handle and the opposite cover. Windows® CD. In such cases, the device driver Swap the handle and cover, and files are stored on your hard drive, rather than on a then replace and tighten both separate CD. If your computer doesn't automatiscrews. That's all there is to it! cally guide you to the correct files, please check your PC's documentation for instructions on installing device drivers. f. Continue to follow the on-screen instructions to complete the installation. When you're finished, click on the Finish button. g. To check out the Saitek ST200's setup, click on Start on the Windows® taskbar, and then select Settings and Control Panel. h. Under Control Panel, double-click the Game Controllers icon. i. In the Game Controllers window, your ST200 will appear as HID Game Controller: 3 axis 4 button joystick. j. Since your Saitek ST200 is pre-calibrated, there's no need for you to calibrate it yourself. However, you should test it out at this point, to make sure that everything is functioning correctly. To do so, click on Properties to open the Game Controller Properties dialog box. Next, click on Test, and try out all the controls on your Saitek ST200. k. After checking out the stick movement, throttle, and all the buttons, quit by clicking OK twice. Your ST200 USB Control Stick is now ready for game play--so it's time to load your favorite game and go for it! Note that the actual controls for the thumb buttons, trigger, and throttle are set within each individual game. Check your game documentation for details. 3. HAVE QUESTIONS? HERE'S SOME HELP! 1 ENGLISH 1. ABOUT THE SAITEK ST200 USB CONTROL STICK... a. My computer is not recognizing the ST200 as an active controller. What's wrong? PLAY IT SAFE! · Check the cable connections. Unplug the joystick Whether you're cruising the skies in a jetliner, or heading for from the computer's USB port, and then plug it the finish line in back in, making certain that the connection is an exciting race, snug. remember that · Remove other gaming devices by going to Start > it's important to Settings > Control Panel > Game Controllers. be aware of how Highlight any existing controller, and click on you're sitting and how you're Remove. holding the stick! Try not to stay · Perhaps the USB driver hasn't been installed in the same position for too long, properly. Try removing the stick and running and be sure to take breaks now and then. Be smart--don't take through the installation again. a chance on straining your b. The buttons don't seem to be reacting correctly! wrists, hands, or fingers! Why? · Check your Game Controller Setup, as described in Section 2. Make sure that you have selected the 3 axis 4 button joystick option. c. The throttle isn't responding as it should. · Try reinstalling the stick, carefully following the directions in Section 2. d. Can I have another controller connected at the same time? · To avoid potential problems and conflicts, we recommend that you remove any existing controllers before installing the ST200. Do this by going to Start > Settings > Control Panel > Game Controllers. Then, highlight any existing controller, and click on Remove. e. I installed the Saitek ST200 and loaded my game, but the game instructions say I have to calibrate it again. Why? · Most current games make use of the Windows® game controller and calibration information. Some games, however, may require you to define the joystick and calibrate it within the program. In these cases, refer to your game manual. 4. IF YOU NEED MORE SUPPORT... Give our website a visit at www.saitek.com. Besides obtaining help with your technical questions, you'll also find up-to-date news and product information, as well as listings of related links that are sure to interest you. And, while you're there, why not explore our website a little further and check out all the other products Saitek has to offer, including a great variety of game controllers, chess computers, and other electronic products--you might just come across something you've never seen before! If you need additional help with the setup or use of your ST200 USB Control Stick, you can also obtain comprehensive product support by contacting your nearest Technical Support Center. You'll find a complete listing of our worldwide affiliates on a separate sheet, included in the box with your ST200. We've provided everything you might need, including e-mail addresses, mailing addresses, and telephone numbers. In order to deal with your problems as quickly as possible, we ask that you please follow these simple guidelines when contacting us: · Have access to your computer when you call! If you are experiencing problems with one particular game, try to have that game loaded. · Provide us with other relevant information, such as your computer's make and model, details on your hardware and software, the version number of the game, etc. · Describe the problem you are having and the events that led up to it, trying to be as precise as possible. Remember--the better we can understand the problem, the faster we can find the solution! 2 ...