MULTIMEDIA MONITOR 34" (32" Viewable) 4:3 SUPER FLAT TUBE 29" (27" Viewable) 4:3 PERFECTLY FLAT TUBE USER MANUAL TABLE OF CONTENTS 1. WARNING AND CAUTION... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1 2. IMPORTANT SAFETY INSTRUCTION... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 2-5 3. FCC STATEMENT... ... ... ... ... ... ... ... ... ... ... ... ..... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 6 4. SPECIFICATIONS... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 7-8 5. CONNECTING YOUR MONITOR... ... ... ... ... ... .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 9 6. LOCATION OF BUTTONS ON REMOTE CONTROL... ... ... ... ... ... ... ... ... ... ... ... ..10 7. LOCATION OF CONTROL (ON FRONT PANEL)... ... ... ... ..... ... ... ... .... ... ... ... ... 11 8. INSTALLATION... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..... ... ... ... ... 12 9. USING THE MONITOR'S ADVANCED FEATURES... ... ... ... ... ... ... ... ... ..........13-21 10. POWER MANAGEMENT FUNCTION... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ....21 11. TROUBLE SHOOTING... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .... ... ... 22 -3- WARNING AND CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR REAR) DO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED PERSONNEL WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS MONITOR TO RAIN OR MOISTURE. HIGH VOLTAGE EXISTS ON THE CATHODE-RAY TUBE ANODE LEAD OF THIS MONITOR. BEFORE SERVICING, DETERMINE THE PRESENCE OF HIGH VOLTAGE BY CONNECTING THE H.V. METER BETWEEN THE ANODE OF CRT CAP AND CHASSIS ONLY. CAUTION: 1. Keep monitor away from excessive dust, high temperature, moisture or direct sunlight. 2. Use well ventilated area and do not cover ventilation openings. 3. Unauthorized modification to this equipment, substitution or the use of an unshielded connecting cable may cause excessive interference. 4. As an ENERGY STAR ® Partner, SAMPO CORPORATION has determined that this product meets the ENERGY STAR® guidelines for energy efficiency . 5. If the picture display is in any way abnormal, disconnect from main power supply. Check and ensure the installation is correct. Then reconnect the main power supply. -4- IMPORTANT SAFETY INSTRUCTION Prior to using this product, please ensure that you have carefully read and understood all the procedures outlined in this user' manual. s 1. Read all of these instructions. 2. Save these instructions for later use. 3. Follow all warnings and instructions marked on the product. 4. Disconnect from the main power supply before cleaning. Do not use liquid or aerosol cleaners. Use only a slightly damp cloth for cleaning. 5. Do not use this product near water. 6. Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage. 7. Slots and openings in the cabinet located at the back and underneath are provided for ventilation. To ensure reliable operation of the product and t o protect it from overheating, these openings must not be blocked or covered by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in an enclosed installation unless proper ventilation is provided. 8. This product should be operated from the type of power source indicated on the marketing label. If you are not sure of the type of power available, consult your dealer or local power company. 9. This product is equipped with a 3-pin earthed plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug. 10. Do not place anything over the power cord. Do not locate this product where the cord might cause potential injuries. -5- IMPORTANT SAFETY INSTRUCTION 11. If an extension cord is used with this product, ensure that the total ampere ratings of the products connected to the extension cord do not exceed the extension cord ampere rating. Also ensure that the total amperes of all products connected to the mains outlet does not exceed 15 amperes. 12. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 13. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. 14. Disconnect this product from the main power supply and refer servicing to qualified service personnel under the following conditions: A. When the power cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in performance, indicating a need for service. -6- Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung fü r den späteren Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine Flü ssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Umeine Beschädigung des Gerätes zu vermeiden sollten Sie nur Zubehö rteile verwenden, die vom Hersteller zugelassen sind. 5. Das Gerät ist vor Feuchtigkeit zu schü tzen. 6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen oder Fallen kö nnte Verletzungen hervorrufen. Verwenden Sie nur sichere Standorte und beachten Sie die Aufstellhinweise des Herstellers. 7. Die Belü ftungsö ffnungen dienen zur Luftzirkulation die das Gerät vor Ü berhitzung schü tzt. Sorgen Sie dafü r, daß diese Ö ffnungen nicht abgedeckt werden. 8. Beachten Sie beim Anschluß an das Stromnetz die Anschluß werte. 9. Die Netzanschluß steckdose muß aus Grü nden der elektrischen Sicherheit einen Schutzleiterkontakt haben. 10. Verlegen Sie die Netzanschluß leitung so, daß niemand darü ber fallen kann. Es sollte auch nichts auf der Leitung abgestellt werden. 11. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu beachten. 12. Wird das Gerät uber einen längeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz trennen.Somit wird im Falle einer Ü berspannung eine Beschädigung vermieden. -7- Wichtige Sicherheitshinweise 13. Durch die Lü ftungsäffnungen dü rfen niemals Gegenstände oder Flussigkeiten in das Gerät gelangen. Dies kö nnte einen Brand bzw. elektrischen Schlag auslö sen. 14. Ö ffnen Sie niemals das Gerät. Das Gerät darf aus Grü nden der elektrischen Sicherheit nur von authorisiertem Servicepersonal geö ffnet werden. 15. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und von einer qualifizierten Servicestelle zu ü berprufen: a - Netzkabel oder Netzstecker sind beschädigt. b - Flussigkeit ist in das Gerät eingedrungen. c - Das Gerät war Feuchtigkeit ausgesetzt. d - Wenn das Gerät nicht der Bedienungsanleitung entsprechend funktioniert oder Sie mit Hilfe dieser Anleitung keine Verbesserung erzielen. e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt. f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist. 16. Bei Reparaturen dü rfen nur Orginalersatzteile bzw. Den Orginalteilen entsprechende Teile verwendet werden. Der Einsatz von ungeeigneten Ersatzteilen kann eine weitere Beschädigung hervorrufen. 17. Wenden Sie sich mit allen Fragen die Service und Reparatur betreffen an Ihren Servicepartner. Somit stellen Sie die Betriebssicherheit des Gerätes sicher. -8- FCC CLASS-B STATEMENT IMPORTANT: The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in strict accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Shielded interconnected cables and shield power cords must be employed with this equipment to insure compliance with the pertinent RF emission limits governing this device. Changes or modifications not expressly approved by the manufacturer could void the user' authority to operate the equipment and invalidate the warranty. s NOTICE OF COMPLIANCE EQUIPMENT REGULATIONS WITH CANADIAN INTERFERENCE-CAUSING This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. -9- SPECIFICATIONS: MULTIMEDIA MONITOR 1. Cathode ray tube a. tube size b. Dot pitch c. Light transmission 2. Power a. Input voltage 34" (4:3) 34 inch (32 inch viewable) H=0.8mm 35% typical 29" (4:3) 29 inch (27 inch viewable) H=0.68mm(center) 53.5% typical 100 Vac ~ 240 Vac 60Hz / 50Hz 3A at 110Vac / 60Hz Max 210 Watts(Max) 100 Vac ~ 240 Vac 60Hz / 50Hz b. Input current 3A at 110Vac / 60Hz Max c. Power consumption 220 Watts(Max) 3. Input signal Video signal a. Type b. Polarity c. Amplitude Analog Positive RGB: 0.714 Vp-p AV: 1Vp-p (with sync) Y CB CR: 1Vp-p (with sync) 75 ohms 75 MHz(Max.) Analog 1.0Vp-p ¡Ù10K£[ TTL Positive or negative 1K ohm(Min) RGB: 31 KHz ~ 52 KHz AV/Y CB CR: 15.734 KHz (NTSC) 15.625 KHz (PAL) TTL Positive or negative 1K ohm(Min) RGB: 50 Hz ~ 120 Hz AV/Y CB CR: 60 Hz (NTSC) 50 Hz (PAL) Analog Positive RGB: 0.714 Vp-p AV: 1Vp-p (with sync) Y CB CR: 1Vp-p (with sync) 75 ohms 75 MHz(Max.) Analog 1.0Vp-p ¡Ù10K£[ TTL Positive or negative 1K ohm(Min) RGB: 31 KHz ~ 52 KHz AV/Y CB CR: 15.734 KHz (NTSC) 15.625 KHz (PAL) TTL Positive or negative 1K ohm(Min) RGB: 50 Hz ~ 120 Hz AV/Y CB CR: 60 Hz (NTSC) 50 Hz (PAL) d. Input impedance e. Dot rate Audio Signal a. Type b. Polarity c. Amplitude Horizontal sync a. Type b. Polarity c. Input impedance d. Frequency Vertical sync a. Type b. Polarity c. Input impedance d. Frequency 4. 5. Connector type Horizontal size Vertical size 15 pin D-type and RCA JACK and 15 pin D-type and RCA JACK and S-terminal 9pin D-SUB S-terminal 9pin D-SUB 620 (for 465 (for +/- 8 mm RGB mode 1-9) +/- 8 mm RGB mode 1-9) 520 +/- 6 mm (for RGB mode 1-9) 388 +/- 6 mm (for RGB mode 1-9) - 10 - SPECIFICATIONS: MULTIMEDIA MONITOR 6. Unit dimension: W X H X D (mm) Packaging dimension : W X H X D (mm) Net weight of unit : User Controls: 34" (4:3) 866 X 718 X 583 1030 X 870 X 760 71 Kg 29" (4:3) 760 X 580 X 513 890 X 705 X 700 54 Kg 7. 8. Power, Brightness, Contrast, V-Size, V-Center, H-Width, H-Phase, Degauss, Pincushion, Trapezoid, Parallelogram, Rotation, R-Gain, G-Gain, B -Gain, Bass, Treble, Balance, Color, Tint, Sharpness, Mute, Volume, Woofer, Recall, Input Select, WIDE. 9. Operating temperature: 0¢J to 40¢J 10. Pin assignments for D-type connector Pin 1 : RED Pin 2 : GREEN Pin 3 : BLUE Pin 4 : GND Pin 5 : GND 11. a. The table below is required timings and technical description for the 34" tube (H=620mm, V=465mm standard size), 29" tube (H=520mm, V=388mm standard size). Mode No. 1 2 3 4 5 6 Resolution 640 640 720 640 800 800 & 480 480 400 480 600 600 Refresh Rate 60 72 70 66.6 60.317 56.25 Pixel timing +/- .5% 39.722 31.746 35.311 33.06 25 27.8 Horizontal visible 640 640 720 640 800 800 Hori ...