USER'S MANUAL AW08PH AW08PK AW12PH AW12PK AW18PH AW18PK AW24PH AW24PK AW122PB Series Series Series Series Series Series Series Series Window-type Room Air Conditioner (Cooling) E S DB98-6004A(4) Register your product at www.samsung.com/global/register Safety Precautions The following safety precautions must be taken when using your air conditioner. WARNING DURING OPERATION u Risk of electric shock. · Can cause injury or death. · Disconnect all remote electric power supplies before servicing, installing or cleaning. · This must be done by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Users of this product are cautioned not to attempt repair of this product at their own discretion. Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased. Never spill any kind of liquid into the unit. Should this happen, unplug or main switch off the unit and contact an authorized service center. Do not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury. Keep children away from the unit. Do not place any obstacles in front of the unit. Do not spray liquid of any kind into the indoor unit. Should this happen, switch off the breaker used for your air conditioner and contact your installation specialist. Make sure that the unit is correctly ventilated at all times: Do not place clothing or other materials over it. If the wireless remote control will not be used for a long time, remove the batteries. (If applicable) When using a wireless remote control, the distance should not be more than 7 meters from the air conditioner. (If applicable) The air conditioner must be plugged into its own specific power source, which must be installed in compliance with national wiring,earthing and safety regulations. If the power cord is damaged in any way, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. This device must be installed according to the national electrical rules. The appliance must be installation that the plug should be easily accessible after installation. If the fuse on PC board is broken please change it with the type of T 3.5A 50V. The breaker of the air conditioner should be all-pole switch; and the distance between its two contacts should be no less than 3.5mm. Such means for disconnection must be incorporation in the fixed wiring. Before throwing out the device, it is necessary to pull back the battery cells and get rid of them safely for recycling reasons. When you need to dispose of the unit, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out and come into contact with your skin,causing injury. Releasing refrigerant into the atmosphere also damages the environments. Please recycle or dispose of the packaging material for this product in an environmentally responsible manner. Never store or ship the air conditioner upside down or sideways to avoid damage to the compressor. The appliance is not intended for use by young children or infirm persons without supervision: Young children should be supervised to ensure that they do not play with the appliance. Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency. u u u u u u u u u u u u u DISPOSING OF THE UNIT u u u OTHERS u u u E- Contents PREPARING YOUR AIR CONDITIONER n n n n n Safety Precautions ........................................................................................ Air Conditioning Unit-Main Parts, Buttons and Display ................................. Remote Control-Buttons ................................................................................ Getting Started .............................................................................................. Inserting the Remote Control Batteries ........................................................ Cooling Your Room ....................................................................................... Airing Your Room .......................................................................................... Removing Excess Humidity........................................................................... Adjusting the Air Flow Direction Horizontally ................................................ Adjusting the Air Flow Direction Vertically .................................................... Setting the On Timer ..................................................................................... Setting the Off Timer ..................................................................................... Selecting Good Morning mode ........................................................................ Selecting Energy saving mode...................................................................... Temperature and Humidity Ranges .............................................................. 4 5 6 7 8 9 0 3 4 5 5 6 7 8 9 OPERATING YOUR AIR CONDITIONER n n n n n PROGRAMMING YOUR AIR CONDITIONER n n n n RECOMMENDATIONS FOR USE n n n n Cleaning Your Air Conditioner....................................................................... Solving Common Problems ........................................................................... Technical Specifications .................................................................................. INSTALLATION............................................................................................. CAUTION "The high inrush current of the starting compressor motor can have adverse effects to the operation of other equipment under unfavorable mains conditions. This equipment does not comply with the relevant technical standards for the limitation of voltage fluctuations and flicker." Before connection this equipment to the power supply system, please report to your suply authority and obtain the consent. Do not connect other electric appliances to the same supply lines. AW18 The maximum permissible system impedance at the power junction box is 0.4 ohms. Usually, the maximum permissible mains impedance will not be exceeded when the branch to the power outlet is fed from a junction box with a rated current of 3A. E-3 Air Conditioning Unit - Main Parts, Buttons and Display The design and shape are subject to change according to the model. Air Outlet Inner air flow blades (right/left orientation) Air inlet (Inside) The air filter is located in side Outer air flow blades (up/down orientation) Air inlet (Outside) Ventilation lever The power plug may be not supplied depending on the model. The type of the power plug may differ according to the type of local power supply. Power plug Temperature/ Timer setting Operating mode indicators (COOL, DRY,FAN) Good Morning setting button Temperature adjustment buttons Timer setting button Energy Saver indicator Remote Control sensor Air flow blade swing button Fan speed adjustment button Timer indicator Good Morning indicator Operating mode selection button (COOL,DRY, FAN) Energy Saver button On/Off button E-4 Remote Control - Buttons Timer setting button Selecting Good Morning button Operating mode selection button Temperature adjustment button Fan speed adjustment button Energy Saver button Air flow blade swing button On/Off button E-5 Getting Started You have just purchased a window-type room air conditioner and it has been installed by your installation specialist. Your Owenr's Instructions contain valuable information on using your air conditioner. Please take the time to read them as they will help you take full advantage of the unit's functions. This Owner's Instructions is just for using your air conditioner correctly. Thus, the illustrations shown in this manual may not exactly match your air conditioners. The booklet is organized as follows. The following figures are shown on pages 4 and 5: Air conditioning unit (main parts, buttons and display) Remote control (buttons) They will help you find the buttons and understand the symbols displayed. In the manual, you will find a series of step-by-step procedures for each function available. The illustrations in the step-by-step procedures use four different symbols: PRESS PUSH IMPORTANT NOTE Moreover,applicable, wherever the illustrations show the positions of the buttons on both the remote control and the unit itself. For the... Remote control The illustrations have a... Gray background. Example: Unit itself White background. Example: E-6 Inserting the Remote Control Batteries You must insert or replace the remote control batteries when: You purchase the air conditioner The remote control does not work correctly Use two AAA, LR03 .5V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after months, even if they have not actually been used. Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it. Insert the two batteries,taking care to respect the polarities: + on the battery with + on the remote control - on the battery with - on the remote control Close the cover by sliding it back unitl it clicks into place. Result: You can control all the functions your air conditioning unit directly from your seat, using the remote control. 3 E-7 Cooling Your Room You must select the Cool mode if you wish to lower the temperature in your room.You can also set the fan speed. If necessary, press the Result: (On/Off) button. Remote Control Control Panel The air conditioner starts up in the Cool mode. The unit beeps twice. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped It will start up to cool aotomatically after about three minutes. If the COOL indicator is not lit up on the unit: Press the or Press the button on the unit one or more times until the COOL / button. indicator lights up The unit beeps each time you press the Result: The air conditioner starts up in Cool mode. You can change modes at any time. button on the remote control 3 To adjust the temperature, press the To adjust the temperature, press the or or button on the remote button on the unit one control one or more times until the required temperature is displayed. or more times until the required temperature is displayed. Possible temperatures are between 8°C and 30°C inclusive. Result: Each time you press the temperaure buttons. - The temperature is adjusted by °C and displayed on the control panel - The unit beeps The air conditioner starts cooling if the room temperature is higher than the selected temperature. 4 To set the fan speed to... Then... Press the or Press the button on the unit one or more times until the desired fen speed(F, F, or F3) is displayed. : Low Speed : Med Speed : High speed 5 To control the direction of the air flow, refer to page . , or button on the remote control as desired. E-8 Airing Your Room If the atmosphere in your room is stale, you can air it using the Fan feature and if necessary, evacuate the stale air outside. If you wish to evacuate stale air outside, push the ventilation lever on the front of the unit to the right and the open position ( ). Result: The air inside the room circulates and stale air is evacuated outside. Otherwise, push the ventilation lever to the left and the closed position ( Result: ). The air simply circulates inside the room. Remote Control If necessary, press the Result: (On/Off) button. Control Panel The air conditioner starts up in the Cool mode. The unit beeps twice. 3 If the FAN indicator is not lit up on the unit: Press the or Press the Result: button on the unit one or more times until the FAN / button. indicator lights up The unit beeps each time you press the The air conditioner starts up in Fan mode. You can change modes at any time. When the air conditioner is in the Fan mode, the temperature is not dis played; in this case, you do not need to set the temperature. button on the remote control 4 To set the fan speed to... Then... Press the or Press the button on the unit one or more times until the desired fen speed(F, F, or F3) is displayed. : Low Speed : Med Speed : High speed , or button on the remote control as desired. 5 To control the direction of the air flow, refer to page . E-9 Removing Excess Humidity If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. Remote Control Control Panel If necessary, press the Result: (On/Off) button. The air conditioner starts up in the Cool mode. The unit beeps. The air conditioner is fitted with a protection mechanism to prevent the unit from being da ...